Author Topic: Canon 7D Mark I  (Read 1088212 times)

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8602
Re: Magic Lantern for 7D 2.0.3
« Reply #225 on: April 07, 2014, 07:16:45 PM »
Go to http://chdk.wikia.com/wiki/Official_Canon_firmware_updates and download firmware version 2.0.3 and install it. It's possible that your 2.0.3 differs a bit. Sorry for the bad pun but I'm told such things happened.
If this doesn't help: Have you tried to reset the cam to factory defaults (including Fn)?


combat squirrel

  • New to the forum
  • *
  • Posts: 8
Re: Magic Lantern for 7D 2.0.3
« Reply #226 on: April 08, 2014, 12:22:09 AM »
Ok done, and nothing works :( , new firmware, tried, no go, reset all, no go, nothing :(

What's happening here?, is it 'safe' to change the file name ?

combat squirrel

  • New to the forum
  • *
  • Posts: 8
Re: Magic Lantern for 7D 2.0.3
« Reply #227 on: April 08, 2014, 01:12:23 AM »
Just tried again and it worked,  ??? random, but pleased! lol

N/A

  • Hero Member
  • *****
  • Posts: 576
  • Dreaming in 14 bit
Re: Magic Lantern for 7D 2.0.3
« Reply #228 on: April 08, 2014, 01:57:30 PM »
Iirc you must use a cf card 8 GB or smaller to install ML. Mine worked the first time I tried it and was using a Lexar 8 GB 200x.
7D. 600D. Rokinon 35 cine. Sigma 30 1.4
Audio and video recording/production, Random Photography
Want to help with the latest development but don't know how to compile?

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8602
Re: Magic Lantern for 7D 2.0.3
« Reply #229 on: April 08, 2014, 03:12:31 PM »
Limit was(!) 32 GB and today with built-in installer the sky is the limit.
4 GByte was a CardTrick limit.

deC9r

  • New to the forum
  • *
  • Posts: 15
  • Canon 7D - KB 64gb 1000x
Re: Magic Lantern for 7D 2.0.3
« Reply #230 on: April 08, 2014, 03:45:37 PM »
hi guys,

i got a question relating cropmode 3x/5x in raw video. Would it be possible to bind a camera key to a function which toggles the 5x preview from canon to 3x grayscale preview? In my opinion it would really speed up the exposure, framing and setting up the focus.


vyskocil

  • Freshman
  • **
  • Posts: 53
Re: Magic Lantern for 7D 2.0.3
« Reply #231 on: April 09, 2014, 01:12:50 PM »

Yes, that 2  features are very important and needed very bad.


Essential features not yet implemented.
1. FPS over ride

Last week I back ported FPS over ride in RAW rec mode (not H264) from TL, I pushed a pull request to the main that await validation.

arrinkiiii

  • Hero Member
  • *****
  • Posts: 1104
  • ML ADDICTED 7D & 5D III
Re: Magic Lantern for 7D 2.0.3
« Reply #232 on: April 09, 2014, 01:33:13 PM »

Yes, i saw that, THANK YOU SO MUCH !!!   Why it's taking so much time to validation?  The dev's need to try the code first? 


Do you think back porting the audio also? 

vyskocil

  • Freshman
  • **
  • Posts: 53
Re: Magic Lantern for 7D 2.0.3
« Reply #233 on: April 09, 2014, 02:30:29 PM »
Yes, i saw that, THANK YOU SO MUCH !!!   Why it's taking so much time to validation?  The dev's need to try the code first? 

Yes.

Do you think back porting the audio also?

I'll try to look at it but before that I need to figured out how this work in hardware... Do I need to build a custom audio cable ?

arrinkiiii

  • Hero Member
  • *****
  • Posts: 1104
  • ML ADDICTED 7D & 5D III
Re: Magic Lantern for 7D 2.0.3
« Reply #234 on: April 09, 2014, 03:11:36 PM »

Uhmmmm i hear some people use the AV cable for the headphone and others use this "special cable" that you can buy or make one. I think someone here in the forum can tell you better then me, don't use so much the sound from camera... but i want =))

Anyone?

idealsceneprod

  • New to the forum
  • *
  • Posts: 20
  • Canon 7D / BMPCC
Re: Magic Lantern for 7D 2.0.3
« Reply #235 on: April 09, 2014, 04:04:43 PM »
The Canon 7D ships with a AV cable, which looks almost like a mini-firewire on one end, and has analog video and audio plugs on the other.

But that is to send audio out, to headphones or the like.

To record audio with RAW footage, I think you have to use the MLV module.
Val Gameiro
Writer, Director, Filmmaker
Austin, Texas

7Dphotos

  • New to the forum
  • *
  • Posts: 9
Re: Magic Lantern for 7D 2.0.3
« Reply #236 on: April 09, 2014, 09:59:16 PM »
Are these the correct instructions for installing on the 7D?

http://wiki.magiclantern.fm/install

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8602
Re: Magic Lantern for 7D 2.0.3
« Reply #237 on: April 09, 2014, 10:12:52 PM »
Close enough. Give it a try.

1. Download latest nightly build and expand contents to card.
2. Run firmware upgrade from Canon menu
3. Restart cam before 30 second timeout

32 GByte restriction doesn't apply anymore.

ted ramasola

  • Moderators
  • Hero Member
  • *****
  • Posts: 1251
Re: Magic Lantern for 7D 2.0.3
« Reply #238 on: April 10, 2014, 04:27:52 AM »
I'll try to look at it but before that I need to figured out how this work in hardware... Do I need to build a custom audio cable ?

The "special" cable from sescom sold by BH is $44 http://www.bhphotovideo.com/c/product/765530-REG/Sescom_DSLR_550D_HOCF_DSLR_550D_HOCF_AV_Out_Headphone.html

So I used the usb av out cable that comes with the camera.
You can buy an rca to mini phone jack cable like this, http://www.rakuten.com/prod/c2g-6in-value-series-one-3-5mm-stereo-female-to-two-rca-stereo-male-y/208181495.html?listingId=231860064&scid=pla_google_BisonOffice&adid=18165&gclid=CIvIufzu1L0CFSsQ7AodF0sAyg

What I did was cut off the rca from both cables and soldered them into a short compact adapter for use with my headphones.

5DmkII  / 7D
www.ramasolaproductions.com
Texas

arrinkiiii

  • Hero Member
  • *****
  • Posts: 1104
  • ML ADDICTED 7D & 5D III
Re: Magic Lantern for 7D 2.0.3
« Reply #239 on: April 10, 2014, 12:14:16 PM »
The "special" cable from sescom sold by BH is $44 http://www.bhphotovideo.com/c/product/765530-REG/Sescom_DSLR_550D_HOCF_DSLR_550D_HOCF_AV_Out_Headphone.html

Fuck!!! This guys abuse of the price  =((


What I did was cut off the rca from both cables and soldered them into a short compact adapter for use with my headphones.

Nice one =))

filmscene

  • Just arrived
  • *
  • Posts: 1
Re: Magic Lantern for 7D 2.0.3
« Reply #240 on: April 20, 2014, 11:32:19 AM »
Hi guys,
Good contact to you all after being reading about all the amazing progress of the 7D Raw for the last months. I need some help. Is there any way to avoid the below issue with red dot when shooting Raw? My 7D has no issues with death pixels (just came from Canon...which I sent to make sure). I have tried different builds and all imaginable settings of ML and camera itself, and the red dot still there. Any idea how I could fix that, or I am just the blessing one to have a 7D to happen to show that problem? I would really appreciate any help.   :'(
<a href="http://www.pixentral.com/show.php?picture=1El1xTtQhVEamFdkAhYQPKCiz0ey00"/><img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1El1xTtQhVEamFdkAhYQPKCiz0ey00_thumb.png" border="0"/>[/url]

<a href="http://www.pixentral.com/show.php?picture=1tsI1l5mZonIEhzqn5KZLGqOQIq6f"/><img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1tsI1l5mZonIEhzqn5KZLGqOQIq6f_thumb.png" border="0"/>[/url]


Thank you!

Evil Flip

  • New to the forum
  • *
  • Posts: 8
Re: Magic Lantern for 7D 2.0.3
« Reply #241 on: April 21, 2014, 07:52:26 PM »
Hey guys, I finally got the balls to upgrade from the alpha 2 to the latest nightly build and it seems to work like a charm, though I can't seem to find the GOP setting (to allow all-I frames). I did some searching on the forum, but that trail just seems to end. Is it no longer there (or not yet?) or am I looking in the wrong place?

arrinkiiii

  • Hero Member
  • *****
  • Posts: 1104
  • ML ADDICTED 7D & 5D III
Re: Magic Lantern for 7D 2.0.3
« Reply #242 on: April 22, 2014, 10:11:39 AM »

It's not working, yet....

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8602
Re: Magic Lantern for 7D 2.0.3
« Reply #243 on: April 22, 2014, 11:26:25 AM »
Yet?
Is there a developer working on GOP/ALL-I?

bumkicho

  • Member
  • ***
  • Posts: 102
Re: Magic Lantern for 7D 2.0.3
« Reply #244 on: April 23, 2014, 09:37:24 PM »
"Failed to create file. Card full?" What does this message mean? Today I wanted to see how long it would continuously record to 128gb CF card since I never shoot continuously longer than 4-5 minutes at a time and I was curious. After first 10 minutes or so, it stopped recording with this message so I turned it off and back on to try again and it stopped after around 10 minutes with the exact same message. Does anyone know what it is?

beastmode

  • Just arrived
  • *
  • Posts: 1
Re: Magic Lantern for 7D 2.0.3
« Reply #245 on: April 23, 2014, 10:02:18 PM »
i hope everyone is aware of LYTRO ILLUM??

probably we can expect that with ML

Evil Flip

  • New to the forum
  • *
  • Posts: 8
Re: Magic Lantern for 7D 2.0.3
« Reply #246 on: April 24, 2014, 08:50:42 PM »
It's not working, yet....

Thanx for the update, I hope it comes back soon.

r4ptor

  • New to the forum
  • *
  • Posts: 6
Re: Magic Lantern for 7D 2.0.3
« Reply #247 on: April 25, 2014, 10:21:31 AM »
Hi guys,

I was really happy with ML on my 7D. But unfortunatly I gave it to a CPS partner to check the AF with my 70-200 on the 7D. Now I have the 2.0.5 firmware running and therefore no ML possible.

Is it possible to downgrade to 2.0.3(with Linux)? I found something online but it requires Windows, but I have no Windows avaible until next week.

Any hints? Thanks

tonybeccar

  • Senior
  • ****
  • Posts: 319
  • 7D
Re: Magic Lantern for 7D 2.0.3
« Reply #248 on: April 26, 2014, 12:31:23 AM »
Hey all! Been away from a while.. is the ML build up to date to the Tragic Lantern build? Or are still some features missing?

Thanks!

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8602
Re: Magic Lantern for 7D 2.0.3
« Reply #249 on: April 26, 2014, 12:59:58 AM »
Is it possible to downgrade to 2.0.3(with Linux)?

Download http://pel.hu/down/eos7d-v203-win.zip from http://pel.hu/getpage.php?pg=eoscard
It's just a zip compressed file containing the FIR you have to copy to your card. Run Canon's firmware upgrade process to downgrade to 2.0.3. Sounds funny but works.

Ciao
Walter