Author Topic: Canon EOS M  (Read 1095349 times)

anan-banan

  • Just arrived
  • *
  • Posts: 1
Re: Canon EOS M
« Reply #3950 on: February 28, 2020, 03:12:37 PM »
Hi friends! Please tell me somebody, what can i do to record in 46/48 fps without this pink (purple) stripes and other deformations. Thank you!

nlantz

  • New to the forum
  • *
  • Posts: 6
Re: Canon EOS M
« Reply #3951 on: March 02, 2020, 04:20:55 PM »
I mostly loook at the files and build from there. I'm a lousy "histogrammer"  :P.
I'm sure a little ettr on my my image would have helped even more. I plan on including the ettr module in eosm build when I get some time to use it...
I for one really miss ettr when it was in the earlier builds

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6933
Re: Canon EOS M
« Reply #3952 on: March 02, 2020, 08:57:16 PM »
Easy. Grab ettr module from another build and put it manually into your current ML folder on sd card. Turn on camera and enable ettr the normal way.

PBTV

  • New to the forum
  • *
  • Posts: 2
Re: Canon EOS M
« Reply #3953 on: March 05, 2020, 01:02:27 AM »
Just wondering, what's the best settings for cinematic 1080p output with the least aliasing and nicest colours?

m300

  • New to the forum
  • *
  • Posts: 3
Re: Canon EOS M
« Reply #3954 on: March 05, 2020, 07:58:48 PM »
Danne, no doubt you've seen the notifications from Atlassian about mercurial support being discontinued on bitbucket; do you have any plans to migrate?

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6933
Re: Canon EOS M
« Reply #3955 on: March 05, 2020, 09:58:08 PM »
Not really. Not yet. Lack of time nowadays mostly.

keel

  • New to the forum
  • *
  • Posts: 46
Re: Canon EOS M
« Reply #3956 on: March 15, 2020, 06:26:22 PM »
(edited)

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6933
Re: Canon EOS M
« Reply #3957 on: March 15, 2020, 06:31:37 PM »
Please go ahead. I,ll add it when you are done. Others could join in. I suggest you start out a new topic and start realizing exactly what you want. I have no time at all personally atm.
This is an open source community. Everybody needs to help out.
Good luck.

keel

  • New to the forum
  • *
  • Posts: 46
Re: Canon EOS M
« Reply #3958 on: March 15, 2020, 07:32:07 PM »
(edited)

keel

  • New to the forum
  • *
  • Posts: 46
Re: Canon EOS M
« Reply #3959 on: March 15, 2020, 07:38:04 PM »
(edited)

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6933
Re: Canon EOS M
« Reply #3960 on: March 15, 2020, 07:40:47 PM »
Just write a readable list of all you want to know. I bet there's a hundred people in here that knows 99 percent of the answers.

keel

  • New to the forum
  • *
  • Posts: 46
Re: Canon EOS M
« Reply #3961 on: March 15, 2020, 07:48:53 PM »
(edited)

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6933
Re: Canon EOS M
« Reply #3962 on: March 15, 2020, 07:59:53 PM »
There are no more new builds coming up and only very minor changes will happen if at all. As a matter of fact. It would be a good contribution if you would sum it all up from a beginners point of view. Many users have been following from the start but not everyone.

Don't expect others to work for you. Why should they.

keel

  • New to the forum
  • *
  • Posts: 46
Re: Canon EOS M
« Reply #3963 on: March 15, 2020, 08:50:44 PM »
(edited)

keel

  • New to the forum
  • *
  • Posts: 46
Re: Canon EOS M
« Reply #3964 on: March 15, 2020, 08:53:15 PM »
(edited)

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6933
Re: Canon EOS M
« Reply #3965 on: March 15, 2020, 09:13:35 PM »
This is an open source project. There could be initiatives and "cleaned up" posts if a commited, devoted person would take the time to do the outlining and work realizing these things. If it is important and interesting enough, that is. Most users settle for less it seems.
I still think if you want change, just start by changing it yourself. Or pay someone to do it for you. Could work as well. Moaning, not so effective.

gravitatemediagroup

  • Member
  • ***
  • Posts: 242
Re: Canon EOS M
« Reply #3966 on: March 16, 2020, 12:39:32 PM »
there is a facebook page (MLV RAW ON EOS M) that's intention was to help with troubleshooting minor issues instead of clogging up the board.  no need for all the drama here.

2blackbar

  • Senior
  • ****
  • Posts: 418
Re: Canon EOS M
« Reply #3967 on: March 16, 2020, 09:40:28 PM »
keel stop whining ,  you want something - do it yourself.
Nobody promised you clean topics with index A to Z.
A lot of people dont know what rewire means either but somehow they managed to live their live in peace.
Test things, and make your conclusions what works best for you.
You was not around when people were talking about a lot of things so dont blame anyone that youre behind.

Luther

  • Senior
  • ****
  • Posts: 317
Re: Canon EOS M
« Reply #3968 on: March 16, 2020, 11:22:13 PM »
@keel, Walter has a ML Wiki project, IIRC. You could contribute there.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7584
Re: Canon EOS M
« Reply #3969 on: March 16, 2020, 11:25:59 PM »
That's not "my" project. I'm just the main contributor and it is dormant for quite some time. And its approach is not that ambitious.

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12461
Re: Canon EOS M
« Reply #3970 on: March 17, 2020, 10:58:03 AM »
That's not "my" project. I'm just the main contributor [...]

Quote of the year :)

keel

  • New to the forum
  • *
  • Posts: 46
Re: Canon EOS M
« Reply #3971 on: March 17, 2020, 07:08:32 PM »
(edited)

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6933
Re: Canon EOS M
« Reply #3972 on: March 17, 2020, 08:19:20 PM »
Well, it is clear enough for most users. Add some other external forums that probably provides answers for most questions and the ball is running. Of course, if a user can't do their part putting in the time and effort reading the source post and accept the work in progress route there will be problems.
Not one of your posts has actually contributed in any clear way how you would reform things. Leave the coders locked out? Not only counterproductive but far from open source philosophy.
Stable and unstable video functions? Be my guest and test and determine what is stable and not. There are so many functions and variations but be my guest.

Anyway. Focus your energy on presenting changes and ideas that are valid and usable. Best way is to start a new post or build an alternate web page mock up with what is better than what is now. If you get that far it will be very easy to determine and include your revolutionary ideas in here. Anybody can talk but few people actually achieve a real change.

And honestly. There's not one skilled coder visibly active at the time of writing working and publishing ml related code atm(sorry if I missed anyone, @heder working on 40D, maybe more is happening out there). Mlv app is still a bit active but what then? Let me be clear. I am at best a bash scripter with some loosely learned c code basics. Not a skilled coder at all.

Also. Mercurial on bitbucket is about to be buried. Without the code foundation this whole place will be scattered in no time.

keel

  • New to the forum
  • *
  • Posts: 46
Re: Canon EOS M
« Reply #3973 on: March 20, 2020, 10:58:43 PM »
(edited)

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6933
Re: Canon EOS M
« Reply #3974 on: March 20, 2020, 11:57:53 PM »
Check reply #2189. If you can't understand what it mean or says try to also follow the code on bitbucket.
You write and ask for so much but it seems all you wanted to know was about rewire mode.
Let me know when you start working on your mock up page.