Author Topic: Canon 80D  (Read 257071 times)

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12183
  • Maintenance mode
Re: Canon 80D
« Reply #275 on: April 10, 2018, 07:44:42 PM »
These logs are from LiveView (10 frames each) and do not have any FA_Create/CaptureTestImage messages. No error message either. Image is still empty - make sure the last attempt is the successful one. Try in PLAY mode without any images on the card, as that mode is a lot less verbose. Please don't send more huge "empty" files - look at them with a hex editor first.

This line is interesting (that's FPS timer B):

Code: [Select]
239065: 35638.106 [CAPD] [0](0xd0006014),(0x617)

Value varies: first log has 0x4de 4 times, 0x4df 15 times. Second log has 0x616 4 times, 0x617 9 times. Assuming 27MHz and timer A = 722 (found in ROM, e.g. FF01D340), that gives 29.970 (first log) and 23.976 (second log), on average.



edit: got a hypothesis about LiveView resolution, but will only post it after being 100% certain. For that, I need two RAM dumps from LiveView, one before call("lv_save_raw", 1) and one after. Please run call("sht_mirror") before and after, too. Run the procedure in 1080p24, 1080p30, 1080p50, 1080p60, 720p50 and 720p60 (edit: x5 zoom, too - doesn't matter where it's started from).

Something like this:
Code: [Select]
dump_file("RAM4-BF.BIN", 0x40000000, 0x40000000);
call("sht_mirror"); // will create MIRROR.txt
msleep(1000);
call("lv_save_raw", 1);
msleep(1000);
dump_file("RAM4-AF.BIN", 0x40000000, 0x40000000);
call("sht_mirror"); // will append to MIRROR.txt

goldenchild9to5

  • Hero Member
  • *****
  • Posts: 534
Re: Canon 80D
« Reply #276 on: April 10, 2018, 08:00:29 PM »
Great job guy's..

201400005064

  • New to the forum
  • *
  • Posts: 3
Re: Canon 80D
« Reply #277 on: April 12, 2018, 05:37:57 PM »
Goodluck guys! I'm new here I wish I can help. I just bought an 80d.

sombree

  • Freshman
  • **
  • Posts: 70
Re: Canon 80D
« Reply #278 on: April 12, 2018, 07:26:28 PM »
Silent photo, PLAY mode without entering live view, no images on card - link. Output file still looks like nothing.
As for the rest - you wanted me to go into movie mode and execute your example code with different resolutions/fps settings, right? If yes - link.
Code diff - I had to move log_finish() little higher - otherwise log file was empty.

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12183
  • Maintenance mode
Re: Canon 80D
« Reply #279 on: April 12, 2018, 09:39:21 PM »
MIRROR.TXT: unfortunately it's mostly empty (no data). We have to either catch all debug messages, or port io_trace (ideally both).

1080p30 (just picked one):
Code: [Select]
binwalk -E -J RAM4-BF.BIN
binwalk -E -J RAM4-AF.BIN



There's a sharp peak in the "after" dump; that's likely a 14-bit raw image buffer.

Pixel peeping: graph starts at x=96px, ends at x=984px, peak starts at 638px (gimp).
File size 1072562176 => approximate address 0x2705285c +/- 0x126e20 => 0x26f00000 ... 0x2720000 (rounded).
Go there in binview and notice the pattern changing.

FE2E4B33 lv_raw_dump -> FE23BA16 get_raw_buffer -> 0x66B0 + 0x54 -> 0x67066000 -> cacheable 0x27066000.
Go there in binview to confirm the exact match. Pattern ends at about 0x27478400 (from binview)
=> size 4269056 = 0x412400 (approximate). Extract this from the RAM dump:

Code: [Select]
dd if=RAM4-AF.BIN of=raw.data bs=$((0x1000)) skip=$((0x27066)) count=$((0x413))

Let's try rawcover.py:
Code: [Select]
python rawcover.py raw.data
...
Possible RAW Bayer data found
Estimated frame width: 2480  <-- likely incorrect

Looks like a dark frame :( (mean=2048, mad=15, std=86; assuming high ISO; log suggests 3200).

Was the lens cap on during the experiment?! Please take it off...

Midnight Son

  • New to the forum
  • *
  • Posts: 2
Re: Canon 80D
« Reply #280 on: April 18, 2018, 06:44:57 PM »
So, realistically what are the chances of getting 4k?

jai554

  • New to the forum
  • *
  • Posts: 27
  • 6d - 60d user
Re: Canon 80D
« Reply #281 on: April 18, 2018, 07:30:16 PM »
So, realistically what are the chances of getting 4k?

Should I say no chance?
https://wiki.magiclantern.fm/faq

dfort

  • Developer
  • Hero Member
  • *****
  • Posts: 3653
Re: Canon 80D
« Reply #282 on: April 18, 2018, 08:19:04 PM »
Never say never and always avoid always because all generalizations are false.

Seriously, there has been some progress made on other cameras including the 700D and 5D2 that might get them closer to 4K. It seems to indicate that all these Canon DSLR's could possibly do 4k.

For the 80D it is a little too early to say because ML isn't far enough along on that camera yet.
5D3.* 7D.206 700D.115 EOSM.203 EOSM2.103 M50.102

jai554

  • New to the forum
  • *
  • Posts: 27
  • 6d - 60d user
Re: Canon 80D
« Reply #283 on: April 19, 2018, 03:41:01 AM »
Never say never and always avoid always because all generalizations are false.

Seriously, there has been some progress made on other cameras including the 700D and 5D2 that might get them closer to 4K. It seems to indicate that all these Canon DSLR's could possibly do 4k.

For the 80D it is a little too early to say because ML isn't far enough along on that camera yet.

Only in RAW recording right?

dfort

  • Developer
  • Hero Member
  • *****
  • Posts: 3653
Re: Canon 80D
« Reply #284 on: April 19, 2018, 03:47:41 AM »
Right, unless someone figures out how to do mjpeg which isn't totally out of the question.
5D3.* 7D.206 700D.115 EOSM.203 EOSM2.103 M50.102

jai554

  • New to the forum
  • *
  • Posts: 27
  • 6d - 60d user
Re: Canon 80D
« Reply #285 on: April 19, 2018, 01:48:10 PM »
Right, unless someone figures out how to do mjpeg which isn't totally out of the question.

maybe if someone can figure out how to take JPEG silent pic then MJPEG will be possible
isnt it will put too much strain on the processor inside the camera?

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6678
Re: Canon 80D
« Reply #286 on: April 19, 2018, 02:11:35 PM »
Digic 4/5 based cams encode H.264/JPEG by dedicated silicon/chips and not by running some code on multi-purpose CPUs. Take it as an educated guess MJPEG is processed the same way.
"Not totally out of the question" might be added by "Do not hold your breath".
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

Chellyandruu

  • New to the forum
  • *
  • Posts: 8
Re: Canon 80D
« Reply #287 on: April 20, 2018, 04:39:10 AM »
hey Alex,if you have any new files you want us to test on camera we are always here.just in case.

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12183
  • Maintenance mode
Re: Canon 80D
« Reply #288 on: April 20, 2018, 10:17:53 AM »
Replies #275/279, in case you missed them.

The files saved by that snippet will allow finding the LiveView RAW resolution (they include the input data to save the first 14-bit DNG). I'm unable to identify resolution from a dark frame though (it would look correct at many other different resolutions), so please run that test (again) without a lens cap.

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12183
  • Maintenance mode
Re: Canon 80D
« Reply #289 on: April 24, 2018, 10:23:36 AM »
Updated portable ROM dumper and would like you to run a few tests:

- color palette repeatability (including last line)
- MD5 checksums (on a 256MB filesystem)
- MD5 checksums without the cache trick (comment out disable_caches_region1_ram_d6 from reboot.c)

This dumper saves both ROM1.BIN and SFDATA.BIN (for emulation).

sombree

  • Freshman
  • **
  • Posts: 70
Re: Canon 80D
« Reply #290 on: April 24, 2018, 12:35:08 PM »
with disable_caches_region1_ram_d6():
- screen seems to be normal
- it starts dumping ROM1
- 2GB card: the after five minutes it's still dumping ROM1 - I'm not sure if camera locked up or it's that slow (probably the latter one)
- 256MB card: it dumps both ROM1 and SFDATA, but it's not that fast; last line of the text is white

without disable_caches_region1_ram_d6():
- screens looks normal, last line of the text is white
- it's much faster
- tried it three times; ROM1 and SFDATA from all three times have same checksum; I've also tried these files in QEMU and they work as expected
- for both (256MB and 2GB) cards results are the same

This is how screen looks like every time - click.

Edit: 1080p60 lv without lense cap - click.

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12183
  • Maintenance mode
Re: Canon 80D
« Reply #291 on: April 24, 2018, 04:41:05 PM »
My hypothesis: the following appear to be video modes tweaked for various maximum FPS, and when you select something in Canon menu, it starts from one of these and adjusts timer B to decrease the FPS until the desired value. For example, the 60p video mode is likely based on the 63.925 FPS one. These are full raw buffer sizes, including black borders:
Code: [Select]
2096 x 676  (timer A = 722, B = 342, 109.345 FPS) @ feb47d48
2096 x 1162 (timer A = 722, B = 585, 63.925 FPS) @ ff01d1c0
2096 x 1372 (timer A = 722, B = 690, 54.197 FPS) @ ff01d250
2144 x 2402 (timer A = 722, B = 1205, 31.034 FPS) @ ff01d2e0

And these appear to be for photo mode:
Code: [Select]
6288 x 4057 (timer A = 772, B = 4061, 8.612 FPS) @ feb47c28
6288 x 4057 (timer A = 1064, B = 4061, 6.249 FPS) @ feb47cb8

Here, dcraw -i -v reports full size 6288 x 4056 (including black borders). One at 8.6 FPS, as predicted, other at 6.25 FPS. Does the 80D have some still photo mode with lower frame rate? Does that mode bring any advantages, such as lower noise?!



How I've got these numbers? Figured out registers 0xD0006008 and 0xD0006014 are the FPS timers, and D0006800/6804 are for raw resolution (DIGIC 5 uses the same registers, except they start with 0xC0F0 instead of 0xD000, and the values follow the same pattern). Scanned the ROM for known patterns (scan_raw_res.py) and got the above values.

Example:
Code: [Select]
ROM:FF01D1C0 DCD 0xD0006800
ROM:FF01D1C4 DCD 0x3000E
ROM:FF01D1C8 DCD 0xD0006804
ROM:FF01D1CC DCD 0x248021A

=> (see raw_lv_get_resolution in raw.c for interpretation) 524x581 raw => 2096x1162 (horizontal multiplier 4, vertical multiplier 2).

The multiplier setup is quite unusual. So far, all D4/5 models seem to have a hardcoded horizontal multiplier, possibly being the number of columns read out in parallel, and vertical multiplier was always 1. For 80D, multipliers are (8,1) in photo mode and (4,2) in LiveView.

63.925 fps (LiveView) vs 8.612 fps (photo):
Code: [Select]
D0006800: 0x3000E
D0006804: 0x248021A
D0006804: 2096 x 1162

D0006800: 0x3000E
D0006804: 0xFDB0320
D0006804: 6288 x 4057



Enough chit-chat; please find the first 14-bit DNG from 80D, captured at 1080p60:

000000.DNG / 000000.JPG

Camera name deliberately misspelled in EXIF, otherwise it won't open in RawTherapee (figure out why).

OlRivrRat

  • Senior
  • ****
  • Posts: 483
Re: Canon 80D
« Reply #292 on: April 24, 2018, 06:05:55 PM »
              @ Alex

       Sweet ~ & the DNG opens in IridientDeveloper Beautifully ~
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)

Lars Steenhoff

  • Senior
  • ****
  • Posts: 451
Re: Canon 80D
« Reply #293 on: April 24, 2018, 09:44:52 PM »
works well in adobe ACR. looks good too!

Stathman

  • New to the forum
  • *
  • Posts: 15
Re: Canon 80D
« Reply #294 on: April 25, 2018, 12:02:10 AM »
To early to open a bottle of champagne?    :P
70D

goldenchild9to5

  • Hero Member
  • *****
  • Posts: 534
Re: Canon 80D
« Reply #295 on: April 25, 2018, 12:25:41 AM »
Great work Team..

squig

  • Hero Member
  • *****
  • Posts: 513
  • Crash test dummy MK3
Re: Canon 80D
« Reply #296 on: April 25, 2018, 01:14:45 AM »
13 stops dynamic range
On sensor ADC
Dual pixel AF
80MB/s write speed

Couldn't shoot cats with it.

emklap

  • New to the forum
  • *
  • Posts: 9
Re: Canon 80D
« Reply #297 on: April 25, 2018, 10:51:24 AM »
Nice progress guys :-)

80D burst speeds according to Canon's website

Approximate Speed:Shooting Conditions
Approx. 7 shots/sec.:during High-speed continuous shooting
Max. approx. 5.0 shots/sec:during Live View shooting or when [Servo AF] is set.
Approx. 3 shots/sec.:Low-speed continuous shooting Silent continuous shooting
80D, 40D, 300D,  15-85 IS, 18-55IS EFS, Tokina17-55/F2.8, ,70-200LIS/F4, 50EF/F1.8, extender 1.4, EX-430, Sigma 8-16

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12183
  • Maintenance mode
Re: Canon 80D
« Reply #298 on: April 25, 2018, 12:04:00 PM »
Can you find out whether different drive modes result in different values on these lines from the startup log?

Code: [Select]
  29061: 11306.683 [CAPE] E-7.2 SetSsgVSize for Readout
  29062: 11306.692 [CAPE] VSIZE(0xfdd)
  29063: 11306.705 [CAPD] [0](0xd0006008),(0x3030303)
  29064: 11306.717 [CAPD] [1](0xd000600c),(0x3030303)
  29065: 11306.728 [CAPD] [2](0xd0006010),(0x303)
  29066: 11306.739 [CAPD] [3](0xd0006014),(0xfdd)

Expected: 0x4XX instead of 0x303 in the slower drive modes.

OlRivrRat

  • Senior
  • ****
  • Posts: 483
Re: Canon 80D
« Reply #299 on: April 26, 2018, 06:36:47 PM »
   My 80D no longer wants to Play with ML. Any SD card with a BootLoader

or Rescue autoexec on it will cause the 80d to go Dark > No signs of Life.

   With "Normal" SD it works just fine.
ORR~DeanB  ~~  80D-ML  &  SL1+ML  &  5D2+ML  &  5DC+ML  &  70D+ML(AliveAgain)