Author Topic: Canon 650D [OLD]  (Read 1067049 times)

blade

  • Member
  • ***
  • Posts: 195
Re: Canon 650D [Status: Hello, world!]
« Reply #1375 on: May 10, 2013, 08:56:59 PM »
After some more testing I come to the following regarding my CPU-load:
* With just the LV overlay (No zebras, Magic zoom or Focus peak) it seems to stabilize on 72% cpu-load.
* As soon as I turn on zebras, it maxes out on 98-99% and stays there.

Regarding the lit card-LED:
* As soon as I cycle through the LV overlays (0 and 1) with the Info button the LED turns on, and stays lit.
* After I shut off LV the LED goes from constant ON to short blinks 5 seconds apart after 30 seconds.

for me:
Everything off and no LV 3.2-3.4%
every thing off ( including global draw) and LV on and focus on manual:  CPU + 69.6- 70.8%

If i turn auto focus on: it is up to 79.1-79.3
If i then turn LV off, it drops to 39% when focusing

LV on, and Global draw and zebras it goes up to 84.2-84.6%
Add focus peak and it increases to 99.2-99.4%

If I then turn autofocus off again, in drops slighly to 996.8-97.2%


I can confirm the led light:

Go te prefs, and turn on LV display presets to 2.
cycle with info button in lv, and led turns solid.

ihowever i cant get it to go off by shutting of lv, it stays solid.

eos400D :: eos650D  :: Sigma 18-200 :: Canon 100mm macro

Dina002

  • New to the forum
  • *
  • Posts: 5
Re: Canon 650D [Status: Hello, world!]
« Reply #1376 on: May 10, 2013, 09:03:33 PM »
I just got Magic Lantern for my Canon 650D now, and I must say, it works great!!! I have used the Intervalometer function in about two hours now, and it works great. 750 pictures taken so far :)

buckbullstallion

  • New to the forum
  • *
  • Posts: 27
Re: Canon 650D [Status: Hello, world!]
« Reply #1377 on: May 10, 2013, 11:10:40 PM »
Oh yeah, I just called Canon on it, but they wanted me to start up a case, I just hung up on Him. I will diagnose myself, and yes I agree boomerang it if it fails. Quicker and faster then any RMA.

The battery pack no longer works with camera therefore cannot do that. It may be in the unlocking of the Boot loader. I am just hoping that it did not fry anything in the camera as I was removing the battery pack. I am hoping that the battery pack if anything failed which I will test on Friday and will post my findings. I just wanted to know if there was a way to Relock the boot loader into the original firmware. I am sure if a new firmware comes out I will be able to apply that and should relock the BL.

Received new Grip, and it works. I purchased the Same make and model. So apparently I had the battery pack inside the grip while removing it, that's what I am thinking. So please note that the Grip is working and thanks goes out to everyone who addressed my concerns. I am now returning grip back to the Big A.

Nanomad or other Devs. is there a link you can post that shows me how to write the Scripts so I can make an HDR 7 exposure script and where and how to apply it to the camera many thanks for the great job.

buckbullstallion

  • New to the forum
  • *
  • Posts: 27
Re: Canon 650D [Status: Hello, world!]
« Reply #1378 on: May 10, 2013, 11:36:38 PM »
for me:
Everything off and no LV 3.2-3.4%
every thing off ( including global draw) and LV on and focus on manual:  CPU + 69.6- 70.8%

If i turn auto focus on: it is up to 79.1-79.3
If i then turn LV off, it drops to 39% when focusing

LV on, and Global draw and zebras it goes up to 84.2-84.6%
Add focus peak and it increases to 99.2-99.4%

If I then turn autofocus off again, in drops slighly to 996.8-97.2%


I can confirm the led light:

Go te prefs, and turn on LV display presets to 2.
cycle with info button in lv, and led turns solid.

ihowever i cant get it to go off by shutting of lv, it stays solid.

I did note that while shooting a 7 minute video with default ML settings that the Camera body became very hot, as I am sure this is related to the High CPU load, I am wondering if this is normal with all those features running? as I see from posts that its happening, my concern is Overheating the board.

PelleParafin

  • New to the forum
  • *
  • Posts: 4
Re: Canon 650D [Status: Hello, world!]
« Reply #1379 on: May 11, 2013, 12:20:30 AM »
LV on, and Global draw and zebras it goes up to 84.2-84.6%

When I use LumaFast in the zebras i get 75%

Quote
Add focus peak and it increases to 99.2-99.4%

Focus peak bumps it up to 96%

Everything else is similar, except my LED turns from solid to flashing 30 seconds after i turn off LV and the canon info (completely black screen).
EOS 650D  |  Kit Zoom EF-S 18-55mm 1:3.5-5.6 IS II  |  Zoom EF-S 18-135mm 1:3.5-5.6 IS STM  |  Zoom EF-S 75-300 1:4-5.6 III  |  Macro EF-S 60mm 1:2.8 USM

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Canon 650D [Status: Hello, world!]
« Reply #1380 on: May 11, 2013, 12:37:32 AM »
LV presets are ok with props on, so I guess that's why they are not working.

I've fixed a little bug that made the canon metering draw over the ML ui (it still does, but for a split second)
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

buckbullstallion

  • New to the forum
  • *
  • Posts: 27
Re: Canon 650D [Status: Hello, world!]
« Reply #1381 on: May 11, 2013, 02:20:20 AM »
LV presets are ok with props on, so I guess that's why they are not working.

I've fixed a little bug that made the canon metering draw over the ML ui (it still does, but for a split second)
should I be installing nightlies?

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Canon 650D [Status: Hello, world!]
« Reply #1382 on: May 11, 2013, 07:13:38 AM »
should I be installing nightlies?
No, they do not support your camera
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

satriani

  • Freshman
  • **
  • Posts: 82
Re: Canon 650D [Status: Hello, world!]
« Reply #1383 on: May 11, 2013, 11:08:12 AM »
But if you compile from a last source, it should work very well ;)
Cameras: Canon EOS 70D, Canon EOS 650D
Lenses: 2x CanonEF-S 18-135 IS STM, Sigma 50mm f1.4 DG HSM Art
Daily builds

Lucas_W

  • Freshman
  • **
  • Posts: 72
Re: Canon 650D [Status: Hello, world!]
« Reply #1384 on: May 11, 2013, 11:26:58 AM »
Very well indeed.
Canon EOS 650D + Kit lens, EF 50mm 1.8 and 52mm polariser.

Aborgh

  • Freshman
  • **
  • Posts: 80
Re: Canon 650D [Status: Hello, world!]
« Reply #1385 on: May 11, 2013, 12:09:43 PM »
But if you compile from a last source, it should work very well ;)

I want to compile but how?
Cameras: Canon EOS 650D and Canon 50 (the old one) Lenses: 18-55mm kit lens , Canon 50mm , Sigma 18-105mm

satriani

  • Freshman
  • **
  • Posts: 82
Re: Canon 650D [Status: Hello, world!]
« Reply #1386 on: May 11, 2013, 12:27:03 PM »
Cameras: Canon EOS 70D, Canon EOS 650D
Lenses: 2x CanonEF-S 18-135 IS STM, Sigma 50mm f1.4 DG HSM Art
Daily builds

Aborgh

  • Freshman
  • **
  • Posts: 80
Re: Canon 650D [Status: Hello, world!]
« Reply #1387 on: May 11, 2013, 12:44:10 PM »
Not necessary, feel free ;)
http://db.tt/C9icw03e

Wow! Thank you :) What a good guy ^^

Does it feature anything new except silent pictures?
Cameras: Canon EOS 650D and Canon 50 (the old one) Lenses: 18-55mm kit lens , Canon 50mm , Sigma 18-105mm

blade

  • Member
  • ***
  • Posts: 195
Re: Canon 650D [Status: Hello, world!]
« Reply #1388 on: May 11, 2013, 12:57:53 PM »
Not necessary, feel free ;)
http://db.tt/C9icw0

For the safety of my camara I will skip this. Thanks but no thanks !
eos400D :: eos650D  :: Sigma 18-200 :: Canon 100mm macro

satriani

  • Freshman
  • **
  • Posts: 82
Re: Canon 650D [Status: Hello, world!]
« Reply #1389 on: May 11, 2013, 01:46:25 PM »
For the safety of my camara I will skip this. Thanks but no thanks !

Honestly, I would not recommend this also. But who trusts me, is welcome :)
I have changed the link above.
Cameras: Canon EOS 70D, Canon EOS 650D
Lenses: 2x CanonEF-S 18-135 IS STM, Sigma 50mm f1.4 DG HSM Art
Daily builds

Aborgh

  • Freshman
  • **
  • Posts: 80
Re: Canon 650D [Status: Hello, world!]
« Reply #1390 on: May 11, 2013, 01:58:23 PM »
Honestly, I would not recommend this also. But who trusts me, is welcome :)
I have changed the link above.

Do you have it?

Which version is newest?
Cameras: Canon EOS 650D and Canon 50 (the old one) Lenses: 18-55mm kit lens , Canon 50mm , Sigma 18-105mm

ZiskinbMe

  • New to the forum
  • *
  • Posts: 12
Re: Canon 650D [Status: Hello, world!]
« Reply #1391 on: May 11, 2013, 02:01:43 PM »
[Pass] strlen("abc") => 0x3
[Pass] strlen("qwertyuiop") => 0xa
[Pass] strlen("") => 0x0
[Pass] strcpy(msg, "hi there") => 0x1acd00
[Pass] msg => 'hi there'
[Pass] snprintf(a, sizeof(a), "foo") => 0x3
[Pass] snprintf(b, sizeof(b), "foo") => 0x3
[Pass] strcmp(a, b) => 0x0
[Pass] snprintf(a, sizeof(a), "bar") => 0x3
[Pass] snprintf(b, sizeof(b), "baz") => 0x3
[Pass] strcmp(a, b) => 0xfffffff8
[Pass] snprintf(a, sizeof(a), "Display") => 0x7
[Pass] snprintf(b, sizeof(b), "Defishing") => 0x9
[Pass] strcmp(a, b) => 0x4
[Pass] snprintf(buf, 3, "%d", 1234) => 0x2
[Pass] buf => '12'
[Pass] memcpy(foo, bar, 6) => 0x1acca0
[FAIL] foo => ''
[Pass] memset(bar, '*', 5) => 0x1acc80
[FAIL] bar => '*****ghjkl'
       bzero32(bar + 5, 5)
[Pass] bar => '****'
       t0 = *(uint32_t*)0xC0242014 => 0x89ec0
       msleep(250)
       t1 = *(uint32_t*)0xC0242014 => 0xd12cc
[FAIL] ABS(mod(t1-t0, 1048576)/1000 - 250) => 0x29
       LoadCalendarFromRTC( &now )
       s0 = now.tm_sec => 0x31
       Date/time: 2013/05/11 10:01:49
       msleep(1500)
       LoadCalendarFromRTC( &now )
       s1 = now.tm_sec => 0x32
[Pass] mod(s1-s0, 60) => 0x1
[Pass] mod(s1-s0, 60) => 0x1
       m0 = MALLOC_FREE_MEMORY => 0x3ea50
[Pass] p = malloc(50*1024) => 0x100d90
[Pass] CACHEABLE(p) => 0x100d90
       m1 = MALLOC_FREE_MEMORY => 0x32240
       free(p)
       m2 = MALLOC_FREE_MEMORY => 0x3ea50
[Pass] ABS((m0-m1) - 50*1024) => 0x10
[Pass] ABS(m0-m2) => 0x0
       m0 = GetFreeMemForAllocateMemory() => 0x379820
[Pass] p = AllocateMemory(256*1024) => 0x80317c
[Pass] CACHEABLE(p) => 0x80317c
       m1 = GetFreeMemForAllocateMemory() => 0x339814
       FreeMemory(p)
       m2 = GetFreeMemForAllocateMemory() => 0x379820
[Pass] ABS((m0-m1) - 256*1024) => 0xc
[Pass] ABS(m0-m2) => 0x0
       m01 = MALLOC_FREE_MEMORY => 0x3ea50
       m02 = GetFreeMemForAllocateMemory() => 0x379820
[Pass] p = alloc_dma_memory(256*1024) => 0x408031bc
[Pass] UNCACHEABLE(p) => 0x408031bc
[Pass] CACHEABLE(p) => 0x8031bc
[Pass] UNCACHEABLE(CACHEABLE(p)) => 0x408031bc
       free_dma_memory(p)
[FAIL] p = (void*)shoot_malloc(24*1024*1024) => 0x0
[FAIL] UNCACHEABLE(p) => 0x40000000
       shoot_free(p)
       m11 = MALLOC_FREE_MEMORY => 0x3ea50
       m12 = GetFreeMemForAllocateMemory() => 0x379820
[Pass] ABS(m01-m11) => 0x0
[Pass] ABS(m02-m12) => 0x0
       EngDrvOut(0xC0F14400, 0x1234)
[Pass] shamem_read(0xC0F14400) => 0x1234
       call("TurnOnDisplay")
[Pass] DISPLAY_IS_ON => 0x1
       call("TurnOffDisplay")
[Pass] DISPLAY_IS_ON => 0x0
       call("TurnOnDisplay")
[Pass] DISPLAY_IS_ON => 0x1
       SetGUIRequestMode(1); msleep(1000);
[Pass] CURRENT_DIALOG_MAYBE => 0x1
       SetGUIRequestMode(2); msleep(1000);
[Pass] CURRENT_DIALOG_MAYBE => 0x2
       SetGUIRequestMode(0); msleep(1000);
[Pass] CURRENT_DIALOG_MAYBE => 0x0
[Pass] display_idle() => 0x1
       GUI_Control(BGMT_PLAY, 0, 0, 0); msleep(500);
[Pass] PLAY_MODE => 0x1
[Pass] MENU_MODE => 0x0
       GUI_Control(BGMT_MENU, 0, 0, 0); msleep(500);
[Pass] MENU_MODE => 0x1
[Pass] PLAY_MODE => 0x0
[Pass] MEM(dialog->type) => 0x4c414944
       GUI_Control(BGMT_MENU, 0, 0, 0); msleep(500);
[Pass] MENU_MODE => 0x0
[Pass] PLAY_MODE => 0x0
       task_create("test", 0x1c, 0x1000, test_task, 0) => 0x3a3400ac
[Pass] test_task_created => 0x1
[Pass] get_task_name_from_id(get_current_task()) => 'run_test'
[Pass] mq = mq ? mq : (void*)msg_queue_create("test", 5) => 0x3a8200ae
[Pass] msg_queue_post(mq, 0x1234567) => 0x0
[Pass] msg_queue_receive(mq, (struct event **) &m, 500) => 0x0
[Pass] m => 0x1234567
[Pass] msg_queue_receive(mq, (struct event **) &m, 500) => 0x9
[Pass] sem = sem ? sem : create_named_semaphore("test", 1) => 0x3b1a0108
[Pass] take_semaphore(sem, 500) => 0x0
[Pass] take_semaphore(sem, 500) => 0x9
[Pass] give_semaphore(sem) => 0x0
[Pass] take_semaphore(sem, 500) => 0x0
[Pass] give_semaphore(sem) => 0x0
[Pass] rlock = rlock ? rlock : CreateRecursiveLock(0) => 0x3bbc004e
[Pass] AcquireRecursiveLock(rlock, 500) => 0x0
[Pass] AcquireRecursiveLock(rlock, 500) => 0x0
[Pass] ReleaseRecursiveLock(rlock) => 0x0
[Pass] ReleaseRecursiveLock(rlock) => 0x0
[Pass] ReleaseRecursiveLock(rlock) => 0xf
[Pass] f = FIO_CreateFileEx(CARD_DRIVE"test.dat") => 0x4
[Pass] FIO_WriteFile(f, (void*)ROMBASEADDR, 0x10000) => 0x10000
[Pass] FIO_WriteFile(f, (void*)ROMBASEADDR, 0x10000) => 0x10000
       FIO_CloseFile(f)
[Pass] FIO_GetFileSize(CARD_DRIVE"test.dat", &size) => 0x0
[Pass] size => 0x20000
[Pass] p = alloc_dma_memory(0x20000) => 0x408031bc
[Pass] f = FIO_Open(CARD_DRIVE"test.dat", O_RDONLY | O_SYNC) => 0x4
[Pass] FIO_ReadFile(f, p, 0x20000) => 0x20000
       FIO_CloseFile(f)
       free_dma_memory(p)
[Pass] count => 0x3a98
[Pass] FIO_RemoveFile(CARD_DRIVE"test.dat") => 0x0
       SW1(1,100)
[Pass] HALFSHUTTER_PRESSED => 0x1
       SW1(0,100)
[Pass] HALFSHUTTER_PRESSED => 0x0

ZiskinbMe

  • New to the forum
  • *
  • Posts: 12
Re: Canon 650D [Status: Hello, world!]
« Reply #1392 on: May 11, 2013, 02:06:35 PM »
Whitebalance work like charm
magic zoom work good med tl 3:1
HDR WORK find
only stub test 5 error

satriani

  • Freshman
  • **
  • Posts: 82
Re: Canon 650D [Status: Hello, world!]
« Reply #1393 on: May 11, 2013, 02:16:25 PM »
Do you have it?

Which version is newest?

ML_N_11.05.zip
ML = Magic Lantern
N = nightly
11.05 = Date 11 May

If developers don't wish this, so let me know and I remove the link.
Cameras: Canon EOS 70D, Canon EOS 650D
Lenses: 2x CanonEF-S 18-135 IS STM, Sigma 50mm f1.4 DG HSM Art
Daily builds

Aborgh

  • Freshman
  • **
  • Posts: 80
Re: Canon 650D [Status: Hello, world!]
« Reply #1394 on: May 11, 2013, 02:19:36 PM »
ML_N_11.05.zip
ML = Magic Lantern
N = nightly
11.05 = Date 11 May

If developers don't wish this, so let me know and I remove the link.

Is this a compile of nightly for every camera or specifically for 650D?
Cameras: Canon EOS 650D and Canon 50 (the old one) Lenses: 18-55mm kit lens , Canon 50mm , Sigma 18-105mm

satriani

  • Freshman
  • **
  • Posts: 82
Re: Canon 650D [Status: Hello, world!]
« Reply #1395 on: May 11, 2013, 02:24:18 PM »
specifically for 650D.
If you have a questions please pm me. Let's keep this thread clean.
Cameras: Canon EOS 70D, Canon EOS 650D
Lenses: 2x CanonEF-S 18-135 IS STM, Sigma 50mm f1.4 DG HSM Art
Daily builds

blade

  • Member
  • ***
  • Posts: 195
Re: Canon 650D [Status: Hello, world!]
« Reply #1396 on: May 11, 2013, 02:29:04 PM »
I am not a developer, so i may be wrong.

The developers post an alpha, on order to get feedback on this particular build.

You and anybody is free to compile what they want, however, if people start reporting bugs, from your build its may be difficult to track whats going on.

Additional if you make a mistake and brick your own camera, thats your own problem, if you brick someone else its camera they will turn to the developers to fix it.  And that may be very hard for them.

Therefor i would advise if you have the skills to compile it yourself, please do so, otherwise be patient....
eos400D :: eos650D  :: Sigma 18-200 :: Canon 100mm macro

Lucas_W

  • Freshman
  • **
  • Posts: 72
Re: Canon 650D [Status: Hello, world!]
« Reply #1397 on: May 11, 2013, 03:15:29 PM »
Self compilation has props enabled, hence the manual white balance and whatnot. IIRC, having props enabled is /very/ dangerous.
Canon EOS 650D + Kit lens, EF 50mm 1.8 and 52mm polariser.

APXmusic

  • New to the forum
  • *
  • Posts: 8
  • Kevin Crocker In Japan
Re: Canon 650D [Status: Hello, world!]
« Reply #1398 on: May 11, 2013, 03:36:33 PM »
Did some testing with the video modes on Pre Alpha 2. I filmed some footage at 1080 24p. The normal bitrate usually comes out at around 50mbps. I upped it to 1.3x and it came just over 60mbps. I tried 1.4x but for some reason it went back to 50mbps. Anyone else try this?

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: Canon 650D [Status: Hello, world!]
« Reply #1399 on: May 11, 2013, 04:08:42 PM »
Does qscale -16 also show as q +- 16 on 650D?