Author Topic: Canon 70D (Read 2399784 times)

tisa94 · « **Reply #2425 on:** April 20, 2016, 06:47:55 AM »

@OlRivrRat

Thank you，but I do not receive.Can you give the 7a2，

请注意我在中国
Please note that I am in China.

AndreRodrigues · « **Reply #2426 on:** April 21, 2016, 07:55:43 PM »

Guys, quick question:

I want use ML just for the Zebras, focus and RGB waveforms, nothing more.

I'll no use for RAW or nothing like that...

Using like that, what are the risks? Can I really brick the camera or is safe?

Sorry for if this looks like a dumb question.

Thx

Walter Schulz · « **Reply #2427 on:** April 21, 2016, 08:00:11 PM »

Yes, you can really brick the cam. Never happened but there is no guarantee your cam will not be the very first turning into a paperweight.

AndreRodrigues · « **Reply #2428 on:** April 21, 2016, 08:42:05 PM »

Hehehe so I think its a risk, but not too much

I worked with phones for long time, unblocking, jailbreaking and etc... So, I'll try it

Tnx for the answer dude!

AndreRodrigues · « **Reply #2429 on:** April 21, 2016, 09:17:13 PM »

Ok, I already installed it. Perfect.

Now another question:

It's not possible work with two cards? Even copying the content of one card to another one, just the first one boot ML menu. So, U can't change cards?

Walter Schulz · « **Reply #2430 on:** April 21, 2016, 09:21:07 PM »

Top of page -> User Guide

OlRivrRat · « **Reply #2431 on:** April 21, 2016, 10:29:43 PM »

      @AndreRodrigues

   Go back & check out My Reply #2377.

            ORR ~ DeanB

AndreRodrigues · « **Reply #2432 on:** April 21, 2016, 11:20:08 PM »

Guys, tnx for all the tips! It's working and it's AMAZING!

I loved the RGB/W histogram, and zebras and focus peak?! WOW! AMAZING!

Congratz for this incredible job! Waiting for more updates!

Tnx a lot!

Peejay51 · « **Reply #2433 on:** April 23, 2016, 12:33:11 AM »

Hi

Ive downloaded and then updated the firmware etc. It all worked fine, thanks. Only there doesn't appear to be any audio adjustments for video . I particularly wanted the audio recording level bar I've seen others add and use. Am i missing something?

Thanks for any help

AndreRodrigues · « **Reply #2434 on:** April 23, 2016, 03:02:13 AM »

Peejay, u need put the settings of the camera for audio manual. Probably yours is set to automatic

Guys, one question:

I'm using the focus peak with 1% and the zebras at 99%. What u guys normally use?

OlRivrRat · « **Reply #2435 on:** April 23, 2016, 05:24:35 AM »

      @AndreRodrigues & PeeJay51

   Cam' Audio Does Not need to be set to Manual, M'L' Audio Meters work with Both Auto or Manual.

@PeeJay51 ~ You may need to turn on the MLV_Sound Module. MLV_Sound is Very Limited on the 70D

but the Level Meters Do Work.

                                 ORR ~ DeanB

Peejay51 · « **Reply #2436 on:** April 23, 2016, 01:32:12 PM »

Many thanks @AndresRodrigeus & OlRivrRat

Sorry for my complete ignorance but where Is the MLV_Sound Module found? Is it within the latest download or a separate download. I saw from vids of previous d/ls that there was an audio menu option that doesn't appear in the version that I've just downloaded, which was 70D.111A

Thanks in advance for any help

OlRivrRat · « **Reply #2437 on:** April 23, 2016, 05:35:16 PM »

      @PeeJay51

   In the M'L'Menu go to the Modules Tab (5th from Right) & Turn On Any of the Modules

that You might want.

                                 ORR ~ DeanB

Peejay51 · « **Reply #2438 on:** April 23, 2016, 06:00:22 PM »

Thanks OlRiverRat

Tried some of the Modules but got 'failed to link modules' error messages. Also 'save configs' Not sure what to do with it now. Although there didn't seem to be a module that referred to Audio level meter

Cheers

Walter Schulz · « **Reply #2439 on:** April 23, 2016, 06:01:57 PM »

MLV_SND.mo links into MLV_REC.mo. You get this error by not loading MLV_REC.mo.

Peejay51 · « **Reply #2440 on:** April 23, 2016, 06:56:34 PM »

Sorry next question.

Does the audio meter function work only with RAW? If so how do i select RAW in the video recording options?

Walter Schulz · « **Reply #2441 on:** April 23, 2016, 07:06:26 PM »

No, enable Audio record option in Canon menu and you will see Audio Meter in LV/record screen. Toggle view by Info button.
To configure MLV/RAW record load MLV_REC.mo and open Movie tab to access RAW record options.

nikfreak · « **Reply #2442 on:** April 23, 2016, 07:13:51 PM »

*edited* thanx for feedback

Peejay51 · « **Reply #2443 on:** April 23, 2016, 08:44:19 PM »

Thanks again. I think i'm getting there slowly $:-\$

OlRivrRat · « **Reply #2444 on:** April 23, 2016, 09:18:14 PM »

      @NikFreak

   Initial install on My "B" was a bit Flaky ~ M'L' Menu came up OK & I went through Tabs to see if there were any obvious

changes. Found ( RedDot @ Memory patches     >   None ) in Debug menu. When I clicked "TrashCan" to Exit the Canon Menu

came up & I could not turn it off. I shut Cam' Off & LED stayed on so I Ejected Batt'. On Restart got warning about Bad Shut Down so

I did 2 more Restarts. Then M'L' Menu came up in JunkyView & when I was able to get out of that all Modules were Off. Removed SD &

Reloaded New Beta & all seems Norm' now but still have ( RedDot @ Memory patches     >   None ) in Debug menu.

                                 ORR~ DeanB

nikfreak · « **Reply #2445 on:** April 23, 2016, 09:21:20 PM »

olRivRat I just removed the test build and will update the first post within minutes to the official Beta3c release.

nikfreak · « **Reply #2446 on:** April 23, 2016, 09:39:00 PM »

first post updated with a new release. feedback welcome as always.

aedipuss · « **Reply #2447 on:** April 23, 2016, 09:41:16 PM »

thank you nikfreak, your work is well appreciated! live long and prosper :-) what would we do without ya!

Ignis · « **Reply #2448 on:** April 23, 2016, 10:36:17 PM »

Evening,

I was wondering, on some other canon cameras, you get the to choose resolutions like 1584x, 1728x and so on, is it possible to get that ability here as well? Because i would love to have the ability to record at a resolution between 1600x and 1280x. And are there any forecasts of when/if Bitrate mods for h.264 are coming back?

Regards,
Ignis

nikfreak · « **Reply #2449 on:** April 24, 2016, 08:53:44 AM »

You can set the resolution and also aspect ratio to suit your needs in much more steps in between your stated ones. Try again. It's nothing new.

Bitrate mods will not come back. There have been official changes lately for 5D3 / 6D in terms of disabling h264 modifications (bitrate). 70D fits that as well and has already ALL-I / IPB settings to chose from. You better shoot RAW with 70D or at Canons default provided H264 settings.

News:

Author Topic: Canon 70D (Read 2399784 times)