« previous next »
Pages: 1 ... 31 32 [33] 34 35 ... 40

Author Topic: Canon 6D / Firmware 1.1.3  (Read 1334461 times)

grey

  • Freshman
  • **
  • Posts: 72
Re: Canon 6D
« Reply #800 on: March 12, 2015, 09:58:24 AM »
As i know, only 5D3 have normal HDMI. And only 5D3 capture real Full HD image from sensor. May be because of need to resize or interpolate image we do't have normal image from HDMI on 6D and others.
Logged

jackmoro

  • Member
  • ***
  • Posts: 161
Re: Canon 6D
« Reply #801 on: March 14, 2015, 06:48:26 PM »
Just in case, if you didn't know/check yet -  in latest build, alex while fixing raw offset (it works, thanx) made possible (probabaly as side effect) to shot raw with slightly bigger horizontal resoluiton. It's 1824 (was 1792) now :)
Logged

SuperMouseDV

  • New to the forum
  • *
  • Posts: 25
Re: Canon 6D
« Reply #802 on: March 14, 2015, 06:58:37 PM »
Grey thanks for that I do say ml makes HDMI Output bigger than stock by a lot and believe me I'm super grateful.
Logged

JLL

  • New to the forum
  • *
  • Posts: 12
Re: Canon 6D
« Reply #803 on: March 17, 2015, 05:08:34 PM »
Update on 1.1.6 port

EDIT: bit of progress, the problem I'm having is actually elsewhere. I disabled CONFIG_CRASH_LOG and it doesn't crash anymore so I guess I'm missing some more stubs.
However, the while loop still doesn't go through. Will keep digging.

Quote
I kind of tracked down the source of my black screen.

Basically, my port runs fine until the line below in boot-hack.c
The way I "confirmed" the code to be running fine until here is by adding calls to info_led_blink() at several points during boot.
The led blinks fine and I can even take pictures (top lcd working, viewfinder info working, no back lcd).
However, once I reach this line, the camera either simply doesn't turn on, or if I turn it on quickly enough and try to take a picture, it will freeze (err 80 on top lcd)

Code: [Select]
    // wait for firmware to initialize
    while (!bmp_vram_raw()) msleep(100);
I have found bmp_vram_info to be 0x9bc98 on 1.1.6, according to the references I found for 1.1.3 and matched the code with the dump on 1.1.6

On 1.1.3, there are two references to the bmp_vram_info address (0x9bc78) when searching for SetBitmapVramAddress

Code: [Select]
ff13a134: e28f2e2d add r2, pc, #720 ; ff13a40c: (42746553)  *"SetBitmapVramAddress BitmapAddr:%#08x"
[snip]
ff13a148: e59f42e4 ldr r4, [pc, #740] ; ff13a434: (0009bc78)

Code: [Select]
"SetBitmapVramAddress BitmapAddr:%#08x":
ff13a40c: 42746553 rsbsmi r6, r4, #348127232 ; 0x14c00000
ff13a410: 616d7469 cmnvs sp, r9, ror #8
[snip]
ff13a430: 00000078 andeq r0, r0, r8, ror r0
ff13a434: 0009bc78 andeq fp, r9, r8, ror ip

On 1.1.6:
Code: [Select]
ff13a12c: e28f2e2d add r2, pc, #720 ; ff13a404: (42746553)  *"SetBitmapVramAddress BitmapAddr:%#08x"
[snip]
ff13a140: e59f42e4 ldr r4, [pc, #740] ; ff13a42c: (0009bc98)

Code: [Select]
"SetBitmapVramAddress BitmapAddr:%#08x":
ff13a404: 42746553 rsbsmi r6, r4, #348127232 ; 0x14c00000
ff13a408: 616d7469 cmnvs sp, r9, ror #8
[snip]
ff13a428: 00000078 andeq r0, r0, r8, ror r0
ff13a42c: 0009bc98 muleq r9, r8, ip

So I am not sure why the while() loop is making the camera crash.

Any ideas ?

Logged

keepersdungeon

  • Member
  • ***
  • Posts: 147
Re: Canon 6D
« Reply #804 on: March 18, 2015, 10:59:30 PM »
Auto ETTR bug:
When I zoom and try to use the ettr, iso and shutter speed get stuck to max values and they won't adjust until u go back to the wides angle of ur lens and turn off ettr, turn off the cam, then take a pic without the ettr on and then reactivate it.
Logged

manojrai11

  • Just arrived
  • *
  • Posts: 1
Re: Canon 6D
« Reply #805 on: March 19, 2015, 05:56:32 PM »
Hi, i updated firmware version 1.1.6 in Canon 6D.
Now how i install the older firmware version 1.1.3 to  install Magic lantern Please HELP

Thanks
Logged

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8541
Re: Canon 6D
« Reply #806 on: March 19, 2015, 05:57:14 PM »
Read first post. Downgrade to 1.1.3
Logged

sgofferj

  • Member
  • ***
  • Posts: 138
Re: Canon 6D
« Reply #807 on: March 19, 2015, 06:47:40 PM »
Found the crop mode hangup. Not the post but... If you press the zoom button while recording, the 6D will freeze and you need to pull the batteries.
Logged
18+ years Linux user, wolf-fan, hobby photographer and -filmmaker
EOS 6D, EOS 7D

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8541
Re: Canon 6D
« Reply #808 on: March 19, 2015, 06:54:41 PM »
Logged

sgofferj

  • Member
  • ***
  • Posts: 138
Re: Canon 6D
« Reply #809 on: March 20, 2015, 07:16:39 AM »
Nope, in h.264 it simply ignores the zoom button.

Edit: It would be very cool (and helpful) if it was possible to cycle through the zoom modes in crop mode without leaving crop mode, so one could switch e.g. between 1x for framing and 10x for focus verification back and forth.
Logged
18+ years Linux user, wolf-fan, hobby photographer and -filmmaker
EOS 6D, EOS 7D

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8541
Re: Canon 6D
« Reply #810 on: March 20, 2015, 11:42:57 AM »
About the bug: Mind opening a bug report? https://bitbucket.org/hudson/magic-lantern/issues?status=new&status=open&kind=bug

Other one: Go "Feature request" but check for duplicates.
http://www.magiclantern.fm/forum/index.php?board=24.0
Logged

keepersdungeon

  • Member
  • ***
  • Posts: 147
Re: Canon 6D
« Reply #811 on: March 20, 2015, 01:47:39 PM »
Logged

supermatth

  • New to the forum
  • *
  • Posts: 2
Re: Canon 6D
« Reply #812 on: March 20, 2015, 03:49:00 PM »
So I like the idea of a nice firmware but is there a list of the things this firmware can do compared to the standard firmware?
Logged

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8541
Re: Canon 6D
« Reply #813 on: March 20, 2015, 03:59:52 PM »
Top of page -> User Guide -> FAQ
Logged

supermatth

  • New to the forum
  • *
  • Posts: 2
Re: Canon 6D
« Reply #814 on: March 20, 2015, 09:24:55 PM »
Thanks, I don't see anything specific to features like able to shoot HDR in Raw mode on 6d for example.
Logged

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8541
Re: Canon 6D
« Reply #815 on: March 20, 2015, 09:57:31 PM »
Top of page -> Downloads -> Browse Nightly Builds -> Features
The list is generated by a robot and esp. Dual-ISO doesn't tell all things to tell.
But the only cams *not* supporting Dual-ISO in RAW/MLV are 50D and 7D. Supported in photo mode, though.
Logged

NunoCaldeira

  • New to the forum
  • *
  • Posts: 41
Re: Canon 6D
« Reply #816 on: March 22, 2015, 01:22:06 AM »
hi, im having a doubt, if someone can help me out i would appreciate.
Been a ML user for 2 years with my 550D. I just upgraded to a 6D, i installed the latest nightly build and it ran fine, managed to use all the function...except Focus Peak and Zebra (both in liveview and on review mode). Yes i hae enable Global Draw. Any tips to sort this out?
Logged

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8541
Re: Canon 6D
« Reply #817 on: March 22, 2015, 01:51:25 AM »
Press Info button several times to toggle screens.
Logged

NunoCaldeira

  • New to the forum
  • *
  • Posts: 41
Re: Canon 6D
« Reply #818 on: March 22, 2015, 02:27:59 AM »
done that already. dont understand why it isnt working
Logged

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8541
Re: Canon 6D
« Reply #819 on: March 22, 2015, 02:42:57 AM »
Set ML default options, restart and try again. Prefs -> Config files -> Restore ML default.
Logged

SuperMouseDV

  • New to the forum
  • *
  • Posts: 25
Canon 6D
« Reply #820 on: March 22, 2015, 09:20:05 AM »
Last revision has caused an interesting error to occur on both of my canon 6D cameras. When idle and having a mic input it keeps switching between mic connected to mic disconnected. If I hit record it locks up (does this to both cameras ) and stays that way till I pull the mic input. Any suggestions. (External source was a Tascam dr 60 and a dr 40. From XLR source)sorry ment to mention this only happens on power (cheap $18 psu amazon units) not on battery
Logged

NunoCaldeira

  • New to the forum
  • *
  • Posts: 41
Re: Canon 6D
« Reply #821 on: March 22, 2015, 09:09:41 PM »
Quote from: Walter Schulz on March 22, 2015, 02:42:57 AM
Set ML default options, restart and try again. Prefs -> Config files -> Restore ML default.
done it and it still doesnt work. neither does most of the OVERLAY functions. the only one that works is CROPMARKS.
any tips to sort this out?
Logged

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8541
Re: Canon 6D
« Reply #822 on: March 22, 2015, 09:12:00 PM »
Best to start from scratch.
Delete ML directory, delete Autoexec.bin and copy extracted nightly contents to card. Results?
Logged

NunoCaldeira

  • New to the forum
  • *
  • Posts: 41
Re: Canon 6D
« Reply #823 on: March 22, 2015, 09:37:13 PM »
Quote from: Walter Schulz on March 22, 2015, 09:12:00 PM
Best to start from scratch.
Delete ML directory, delete Autoexec.bin and copy extracted nightly contents to card. Results?
just tried it and still not working.
when i go to canon menus on the firmware it says: "vers. firmware: 1.1.3". shouldnt be a ML nightly build there? At least on my 550D it shows.
I have the canon language set to portuguese. does it matter?
I dont understand why it isnt working...all the other options work like "EXPOSURE ADJUST"...but not the OVERLAY options.
also whats this file on the nigthly build zip "ML-6D113.FIR"?
Logged

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: Canon 6D
« Reply #824 on: March 22, 2015, 09:40:14 PM »
Pick an option that doesn't work and read its help text aloud (paste it here).
Logged
Pages: 1 ... 31 32 [33] 34 35 ... 40
« previous next »