Canon 650D [OLD]

Started by nanomad, November 29, 2012, 12:54:43 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

nanomad

Quote from: kazeone on May 04, 2013, 06:52:16 PM
so  wait if the camera can do a tops of 40mbs then does that mean there isnt a point to spending a small fortune on a 95mbs memory card like SanDisk Extreme Pro and better of getting just the SanDisk Extreme at 45mbs second and using that extra cash to get a larger capacity card instead?

Yes, unless a canon update brings the 208Mhz mode (unlikely, I hope the 700D has it but then, who knows)
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

Lucas_W

Quote from: MarlonSenanayake on May 04, 2013, 07:07:18 PM
Gradual Expo - On -  Ramping Speed 1EV/16 Frame
HDR Video - ISO 200/800v 2EVO

Recorded Video also Flicker

RTFM - http://wiki.magiclantern.fm/userguide#hdr_video

It's suppose to flicker, that's how the HDR Video feature works.
Canon EOS 650D + Kit lens, EF 50mm 1.8 and 52mm polariser.

RafaLibrenz

I'm running PreAlpha2 here on my T4i. It's working, and I'm happy! Thank you, Nanomad!

Here is the benchmarks of my cards:



70D + 18-135 STM

wild05kid05

For those still struggling to enable boot flag. Here is how I got it working:
Downloaded the fir file (650D-safe-dumper)
Downloaded the 650D Alpha 2 file
Downloaded the program to make the SD card bootable. (EOScard)

Format SD card (Low Level in Camera)
Copy fir file onto SD Card
Update firmware in camera
Remove SD card
Copy ML Alpha2 650D onto SD Card
Put SD Card back in
Install ML Alpha 2 650D (Update firmware in camera)
Remove SD Card
Make the SD bootable (using the program EOScard, Tick first two boxes, Press Save, Refresh)
Put SD Card back in

Done.

pemstudio

Where can I find PreAlpha2? I'm interested in testing this.

Aborgh

Quote from: wild05kid05 on May 05, 2013, 07:11:58 AM
For those still struggling to enable boot flag. Here is how I got it working:
Downloaded the fir file (650D-safe-dumper)
Downloaded the 650D Alpha 2 file
Downloaded the program to make the SD card bootable. (EOScard)

Format SD card (Low Level in Camera)
Copy fir file onto SD Card
Update firmware in camera
Remove SD card
Copy ML Alpha2 650D onto SD Card
Put SD Card back in
Install ML Alpha 2 650D (Update firmware in camera)
Remove SD Card
Make the SD bootable (using the program EOScard, Tick first two boxes, Press Save, Refresh)
Put SD Card back in

Done.


Thanks for this :D

pemstudio

Quote from: Aborgh on May 05, 2013, 10:30:29 AM

Thanks for this :D

Aborgh - Do you have files to 650D?  If you have got, could you send me?

newsense

Quote from: pemstudio on May 05, 2013, 10:39:05 AM
Aborgh - Do you have files to 650D?  If you have got, could you send me?

I posted the links in a previous post and found all the links here in this thread.

"-Download the .fir file from https://bitbucket.org/hudson/magic-lantern/src/99bd629f7c5712346369840e64c04fd2d4576520/platform/650D.101/devkit/650D-safe-dumper.fir?at=unified (Thanks to Lucas_W for pointing out the link, I would have uploaded the .fir myself but thought who would use firmware from some stranger)

Enable the bootflag on the SD card:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-Do a low-level format of the SD card (DO NOT SKIP THIS)
- Enable SD card bootflag using EOSCard or similar ( software to make the card bootable: http://wiki.magiclantern.fm/3rd_party_software )

Install Magic Lantern
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- Copy over the files to the SD card ( Download ML Alpha 2 for the 650D here: http://nanomad.magiclantern.fm/650D/magiclantern-v2.3.NEXT.2013Apr30.650D.PreAlpha2.zip and unzip to the root of your SD card. You should than have a ML folder and an autoexec.bin on the root of your SD card. "

loplo

Is it really that hard to search?

newsense

Quote from: loplo on May 05, 2013, 10:56:03 AM
Is it really that hard to search?

He contributed so maybe he felt he shouldn't have to read?

loplo


Vietky69

Quote from: newsense on May 05, 2013, 10:55:09 AM
I posted the links in a previous post and found all the links here in this thread.

"-Download the .fir file from https://bitbucket.org/hudson/magic-lantern/src/99bd629f7c5712346369840e64c04fd2d4576520/platform/650D.101/devkit/650D-safe-dumper.fir?at=unified (Thanks to Lucas_W for pointing out the link, I would have uploaded the .fir myself but thought who would use firmware from some stranger)

Enable the bootflag on the SD card:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-Do a low-level format of the SD card (DO NOT SKIP THIS)
- Enable SD card bootflag using EOSCard or similar ( software to make the card bootable: http://wiki.magiclantern.fm/3rd_party_software )

Install Magic Lantern
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- Copy over the files to the SD card ( Download ML Alpha 2 for the 650D here: http://nanomad.magiclantern.fm/650D/magiclantern-v2.3.NEXT.2013Apr30.650D.PreAlpha2.zip and unzip to the root of your SD card. You should than have a ML folder and an autoexec.bin on the root of your SD card. "
Thanks for this .

pemstudio

Quote from: newsense on May 05, 2013, 10:55:09 AM
I posted the links in a previous post and found all the links here in this thread.

"-Download the .fir file from https://bitbucket.org/hudson/magic-lantern/src/99bd629f7c5712346369840e64c04fd2d4576520/platform/650D.101/devkit/650D-safe-dumper.fir?at=unified (Thanks to Lucas_W for pointing out the link, I would have uploaded the .fir myself but thought who would use firmware from some stranger)

Enable the bootflag on the SD card:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-Do a low-level format of the SD card (DO NOT SKIP THIS)
- Enable SD card bootflag using EOSCard or similar ( software to make the card bootable: http://wiki.magiclantern.fm/3rd_party_software )

Install Magic Lantern
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- Copy over the files to the SD card ( Download ML Alpha 2 for the 650D here: http://nanomad.magiclantern.fm/650D/magiclantern-v2.3.NEXT.2013Apr30.650D.PreAlpha2.zip and unzip to the root of your SD card. You should than have a ML folder and an autoexec.bin on the root of your SD card. "

Thank yo very much for your help.

Aborgh

Quote from: newsense on May 05, 2013, 10:55:09 AM
I posted the links in a previous post and found all the links here in this thread.

"-Download the .fir file from https://bitbucket.org/hudson/magic-lantern/src/99bd629f7c5712346369840e64c04fd2d4576520/platform/650D.101/devkit/650D-safe-dumper.fir?at=unified (Thanks to Lucas_W for pointing out the link, I would have uploaded the .fir myself but thought who would use firmware from some stranger)

Enable the bootflag on the SD card:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-Do a low-level format of the SD card (DO NOT SKIP THIS)
- Enable SD card bootflag using EOSCard or similar ( software to make the card bootable: http://wiki.magiclantern.fm/3rd_party_software )

Install Magic Lantern
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- Copy over the files to the SD card ( Download ML Alpha 2 for the 650D here: http://nanomad.magiclantern.fm/650D/magiclantern-v2.3.NEXT.2013Apr30.650D.PreAlpha2.zip and unzip to the root of your SD card. You should than have a ML folder and an autoexec.bin on the root of your SD card. "

On mac, do you use macboot and choose "make dslr bootable" with log?

OliverD

Quote from: Aborgh on May 05, 2013, 12:23:15 PM
On mac, do you use macboot and choose "make dslr bootable" with log?

I choose "canon scriptable" or what its called and it worked for me

diy-greenenergy

Quote from: wild05kid05 on May 05, 2013, 07:11:58 AM
For those still struggling to enable boot flag. Here is how I got it working:
Downloaded the fir file (650D-safe-dumper)
Downloaded the 650D Alpha 2 file
Downloaded the program to make the SD card bootable. (EOScard)

Format SD card (Low Level in Camera)
Copy fir file onto SD Card
Update firmware in camera
Remove SD card
Copy ML Alpha2 650D onto SD Card
Put SD Card back in
Install ML Alpha 2 650D (Update firmware in camera)
Remove SD Card
Make the SD bootable (using the program EOScard, Tick first two boxes, Press Save, Refresh)
Put SD Card back in

Done.

Thanks for this!
I had to charge the battery, then start the installation....
400D with 400Plus, 650D with ML, Sigma 17-70 2.8-4.5, Canon 50mm f1.8, Canon 100mm 2.8 macro, Canon 55-250mm IS, DIY Macro Ring, Nissin Di622

Aborgh

Almost F'ed up my camera when trying to install... Will leave this for now...

JamieRollsMedia650D

Quote from: Aborgh on May 05, 2013, 03:13:31 PM
Almost F'ed up my camera when trying to install... Will leave this for now...

This was so easy to install with above instructions and links took me 5mins.

Also this ML stuff is amazing. Can not wait for final release with everything working 100%.

IF I find anything to report that hasn't already I will put up straight away.

After
5montha of me following this I have finally got ml so yea big day for me!

Aborgh

Quote from: JamieRollsMedia650D on May 05, 2013, 03:34:02 PM
This was so easy to install with above instructions and links took me 5mins.

Also this ML stuff is amazing. Can not wait for final release with everything working 100%.

IF I find anything to report that hasn't already I will put up straight away.

After
5montha of me following this I have finally got ml so yea big day for me!

Mine showed up with small boxes and said "ML did not find no fonts" or something like that and some white texts in the upper left corner kept on flashing... :S

kzi2006

Quote from: Aborgh on May 05, 2013, 03:13:31 PM
Almost F'ed up my camera when trying to install... Will leave this for now...
i have Installed this alfa on all my 3 650D cameras - all working good)
EOS 6D, 3xEOS 650D, Canon 24-105, Canon 10-22, Sigma 50-150 2.8 APO HSM, Sigma 17-50mm 2.8, Canon 50 1.4, Samyang 14mm 2.8
https://vimeo.com/kzi/

Aborgh

Quote from: kzi2006 on May 05, 2013, 03:51:50 PM
i have Installed this alfa on all my 3 650D cameras - all working good)


Could you please tell me your steps and how the camera behaved while you upgraded it?

nanomad

As a developer, it would be best if you explained what you did and what went wrong
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

donjames150

rather than have to figure out where all these files are at..........

Create a magic lantern folder on your hard drive

Download http://nanomad.magiclantern.fm/650D/magiclantern-v2.3.NEXT.2013Apr30.650D.PreAlpha2.zip (unzip all files to your ml folder)

On your camera select menu, first wrench icon, format card

download https://bitbucket.org/hudson/magic-lantern/src/99bd629f7c5712346369840e64c04fd2d4576520/platform/650D.101/devkit/650D-safe-dumper.fir?at=unified, then copy the .fir file to your card and put it back in the camera.

With the cam in manual mode, go to last wrench setting before star, fimware ver, set,  select ok, then my menu settings will read enablebootdisk :)

Put your card in the computer and download http://pel.hu/down/EOScard.exe and run this program

Check EOS Devlop and Bootdisk boxes, save

Check the card, if EOS card wrote any files, delete them

Copy from your ML folder these files: ML folder, autoexec.bin and 650D-safe-dumper.fir to your card

Put card in camera and press the trashcan button after it boots, then the left arrow button to the left of the set button
EOS 760D + 55-250mm + Tokina 11-16mm

Aborgh

Quote from: nanomad on May 05, 2013, 03:55:53 PM
As a developer, it would be best if you explained what you did and what went wrong

I low formated the card , Downloaded the 650D-safe-dumper.fir put it on the SDHC card, tried to update and thats when the "ML something something" white text in the upper left corner appeared saying something about some font and then a smal QR code look-a-like box appeared in the middle of the screen. Thats when I panicked and shut the camera off, removed the battery and removed the files that were on the SDHC.

Or is it suppose to do this?

nanomad

You need the FIR and ML files on the card too.

But:
-  Remove any third party accessories / batteries first
-  Don't use a battery grip
- Clear canon settings and Cfn
- Run fw upgrade from PHOTO M mode (not video, photo)
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5