Author Topic: Canon 70D (Read 2403542 times)

Walter Schulz · « **Reply #1975 on:** November 19, 2015, 08:47:22 PM »

Just to be sure: Prefs tab -> Config files -> Restore ML defaults
Restart cam.

bombobrudi · « **Reply #1976 on:** November 19, 2015, 09:26:46 PM »

also not working... I had several problems with the normal overlay coming up here and there in front of ML overlay... very annoying. But now not even a ML overlay anymore.

Walter Schulz · « **Reply #1977 on:** November 19, 2015, 09:59:15 PM »

@nikfreak: Any idea what is going on with bombobrudi's installation?

bombobrudi · « **Reply #1978 on:** November 19, 2015, 10:15:29 PM »

Can I supply any log file or something like this?

Thobias · « **Reply #1979 on:** November 19, 2015, 10:25:37 PM »

According to Eric Chan (Camera Raw Engineer) problem with importing DNG files to Adobe products that contain meta-data from EOS 70D will be fixed soon!
Source: http://feedback.photoshop.com/photoshop_family/topics/canon-70d-corrupted-exif-data-of-dng-files

That mean we will be able to use MLV and post-edit DNG footages directly in Adobe products. Wonderful!

JohnnyG_71 · « **Reply #1980 on:** November 19, 2015, 10:44:44 PM »

Quote from: Thobias on November 19, 2015, 10:25:37 PM

According to Eric Chan (Camera Raw Engineer) problem with importing DNG files to Adobe products that contain meta-data from EOS 70D will be fixed soon!
Source: http://feedback.photoshop.com/photoshop_family/topics/canon-70d-corrupted-exif-data-of-dng-files

That mean we will be able to use MLV and post-edit DNG footages directly in Adobe products. Wonderful!

I'd like to give a big shout-out to Thobias for bringing the issue to Adobe's attention, rather than just complaining about how terrible Adobe is for not fixing something that they weren't aware of.

Cheers to you, Thobias!!!

Thobias · « **Reply #1981 on:** November 19, 2015, 11:04:59 PM »

Quote from: JohnnyG_71 on November 19, 2015, 10:44:44 PM

I'd like to give a big shout-out to Thobias for bringing the issue to Adobe's attention, rather than just complaining about how terrible Adobe is for not fixing something that they weren't aware of.

Cheers to you, Thobias!!!

You're welcome! It mean also a lot for me, so I know that just complaining usually not works

starbase64 · « **Reply #1982 on:** November 19, 2015, 11:53:24 PM »

@bombobrudi

overlay works fine here

DeafEyeJedi · « **Reply #1983 on:** November 20, 2015, 02:35:28 AM »

Maybe Beta-2 has the Default Global Draw to OFF -- try enabling that back to ON and report back.

I just tried and it looks fine on my end.

nikfreak · « **Reply #1984 on:** November 20, 2015, 07:39:30 AM »

Quote from: Walter Schulz on November 19, 2015, 09:59:15 PM

@nikfreak: Any idea what is going on with bombobrudi's installation?

Sounds like pressing info button several times could solve his problem or Global Draw is completely turned off.

laci.szebeni · « **Reply #1985 on:** November 20, 2015, 07:45:33 AM »

Quote from: nikfreak on November 20, 2015, 07:39:30 AM

Sounds like pressing info button several times could solve his problem or Global Draw is completely turned off.

His symptoms could be replicated by first cycling the Info button to a screen without ml, and then enabling exposure presets changed by the info button..

Walter Schulz · « **Reply #1986 on:** November 20, 2015, 08:11:53 AM »

Thanks for input. But this setting will just disable any screen change in LV and it will disappear after restoring ML defaults.
@bombobrudi: Are you able to switch screens in LV at all?

bombobrudi · « **Reply #1987 on:** November 20, 2015, 02:52:23 PM »

Thanks all for your feedback.
Global Draw is enabled. After 50 info button rotations still no overlay

The funny thing is, that now also other (older) ML version don't give me any overlay.
I can open up the ML settings screen but in live view I always ONLY have the canon default overlays

((
I can cycle the normal canon overlays.

Possible that I bricked the cam in any way?
I will do another test later.

edit: also disabled global draw, saved it and restarted cam, enabled it again and restart. also not working.

nikfreak · « **Reply #1988 on:** November 20, 2015, 03:33:21 PM »

Reset cam settings and also additionally Cfn settings. I am sure something's interfering. No need to call it a brick. Ml extends your cam capabilities. If you only got canon defaults it's default by any means

aedipuss · « **Reply #1989 on:** November 20, 2015, 05:02:13 PM »

i'd start over. low level format the sd card in the camera(erase ml). extract the ml zip onto it. use the update firmware steps.

TechnoPilot · « **Reply #1990 on:** November 20, 2015, 07:10:59 PM »

Quote from: aedipuss on November 20, 2015, 05:02:13 PM

i'd start over. low level format the sd card in the camera(erase ml). extract the ml zip onto it. use the update firmware steps.

Agreed, I suggest you just start from scratch with the ML install, see if that fixes the issue!

TechnoPilot · « **Reply #1991 on:** November 20, 2015, 07:17:26 PM »

BTW guys, I've been doing some professional shoots with this Beta 2 build on my B firmware 70D and have run into an issue that I could swear we fixed back a number of Alphas ago.

My shooting has been photography all this week and while going to review photos and punch in to check sharpness using the +/- buttons, everytime one press is taking me to full zoom and not stepping in. I thought it might be because I had Magic Zoom enabled for my video work, but disabling this had no effect, same of course but tried, global draw. I'm a little stumped because along with this, when using the punch in button instead of pinching with the touch screen, it also locked up touch functionality again at random (only when using the +/- key for photo review) which is something I also thought we solved a little while back.

Any recommendations Nikfreak or what you need from me to debug, let me know!

nikfreak · « **Reply #1992 on:** November 20, 2015, 07:42:40 PM »

Sounds interesting. never had such a report for a long time. I remember people having the touch screen being stuck in early Alphas, too. I will try to replicate what you described these days but don't have immediately an idea what could have caused it to appear (again?). Maybe you could also try to replicate and see if any of the image review setting is the root of your issue...

deddo · « **Reply #1993 on:** November 21, 2015, 04:53:47 AM »

Hi guys!

as i never install any of magic lantern plugin in my 70D before. Can anyone suggest me which one should i go for "70D.111A" or "70D.111B"

Thanks so much

DeafEyeJedi · « **Reply #1994 on:** November 21, 2015, 05:21:12 AM »

Try A and if it doesn't work then Try B.

Upon installation it'll tell you which version you have.

OlRivrRat · « **Reply #1995 on:** November 21, 2015, 07:12:03 AM »

@ TechnoPilot & NikFreak

Checked & found same Issue/Feature here ~ but it seems to be Controlled by "Prefs" ~ "Image Review Settings" ~ "QuickZoom"

nikfreak · « **Reply #1996 on:** November 21, 2015, 08:09:53 AM »

Quote

Image Review
...
CanonMnu:Hold→PLAY: if you set Image Review: Hold in Canon menu, it will go to PLAY mode instead. This allows you to zoom in as soon as you take the picture (without having to press PLAY...

Can you check if bug also happens with the setting above plz?

OlRivrRat · « **Reply #1997 on:** November 21, 2015, 07:47:12 PM »

@ NikFreak

Seems to produce same result. But ~ As it is controllable with "ML Menu" ~ "Prefs" ~ "Image Review Settings" ~ "QuickZoom",

I'm seeing It as a Rather Nice "Feature", Rather than a Bug.

mercator · « **Reply #1998 on:** November 22, 2015, 02:08:14 PM »

Hi,
Perhaps I am missing something here ... but how do I set Dual ISO?
Thanks a lot,
M

bombobrudi · « **Reply #1999 on:** November 22, 2015, 06:53:42 PM »

hey ho

thanks for all your advices... I've reset my cam, did not work, reset cn functions, did not work.
Formatted card, nothing.
Then, after trying out every single option, after enabling red eye reduction it worked again! oO
I could disable it again and it still works for me... Maybe it's just by accident, but it works!!!

))

Thanks for all your help.

News:

Author Topic: Canon 70D (Read 2403542 times)