Author Topic: POLL: What model to work on next?  (Read 54611 times)

victorh

  • Just arrived
  • *
  • Posts: 1
Re: POLL: What model to work on next?
« Reply #25 on: July 24, 2012, 02:53:56 PM »
Eye fi compatible!

Malcolm Debono

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 707
  • Cinematographer
Re: POLL: What model to work on next?
« Reply #26 on: July 24, 2012, 03:01:52 PM »
Still hit the 4gb problem though unless you use sxhc which it can also use. 16gb is rougly 48min. 4gb is 12min.

DSLRs also use SDHC but there's still the 4gb limit. If you're referring to SDXC cards, I haven't seen any which are less than 64gb, and this isn't the case since Canon specifically stated that "Continuous shooting can last up to 44 minutes on a 16 GB memory card".

Source: http://nofilmschool.com/2012/07/canon-announces-mirrorless-eosm-camera-extended-recording-times/
Wedding & event cinematographer
C100 & 6D shooter
New here?  Check out the FAQs here!

Digital Guy

  • New to the forum
  • *
  • Posts: 38
  • Canon 60D on steroids
Re: POLL: What model to work on next?
« Reply #27 on: July 24, 2012, 09:54:33 PM »
The time contraints depend on what file system you format the card.
FAT16
FAT32
NTFS
Can the Canon M read NTFS or extended FAT32?
Magic Lantern v2.3 installed on both Canon 60D's with 17-85 & 10-22 & 18-250mm lenses. Canon EOS-M EOSM-FD adapter. Crazy about HDR timelapse photography, I'm experimenting with HDR video and use Sony Vegas Pro 12 video editor and Photomatix Pro

coutts

  • Developer
  • Senior
  • *****
  • Posts: 401
Re: POLL: What model to work on next?
« Reply #28 on: July 25, 2012, 05:24:11 PM »
EOS M :)

kabeza

  • New to the forum
  • *
  • Posts: 2
  • ML on 1100D !!
Re: POLL: What model to work on next?
« Reply #29 on: July 25, 2012, 09:32:07 PM »
donated and praying for 1100D (T3) version  ::)

jplxpto

  • Developer
  • Hero Member
  • *****
  • Posts: 506
Re: POLL: What model to work on next?
« Reply #30 on: July 29, 2012, 03:58:30 AM »
I think there are many users who have 350D, 400D, 450D and 40D.
This equipment has been discontinued but are still in the drawers of many millions of Canon customers.
Over time these became obsolete equipment. Many of its users would like to use them to make their first tests with ML. On the other hand, might serve to improve the potential of its old cameras. In many cases, they could use them to perform some types of photography that do not allow your new equipment. Thus they avoided damaging your most valuable equipment. Because they are equipment with a lower cost, it is normal that there are many. By supporting these models would benefit a greater number of users.
Developers to work on these models can also acquire useful knowledge to support the latest and most advanced models.

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: POLL: What model to work on next?
« Reply #31 on: July 29, 2012, 04:57:32 AM »
Quote
extended FAT32?

it probably uses exfat. NTFS in embedded things isn't likely.

400D has 400Plus, no point to put ML on it.

ilguercio

  • Hero Member
  • *****
  • Posts: 845
Re: POLL: What model to work on next?
« Reply #32 on: July 29, 2012, 12:48:18 PM »
EOS M :)
+1.
Although i wanted Canon to make it a bit better since mirrorless cameras are available since quite a bit now.
This would be the first ML camera to accept virtually any lens made.
Canon EOS 6D, 60D, 50D.
Sigma 70-200 EX OS HSM, Sigma 70-200 Apo EX HSM, Samyang 14 2.8, Samyang 35 1.4, Samyang 85 1.4.
Proud supporter of Magic Lantern.

scrax

  • Contributor
  • Hero Member
  • *****
  • Posts: 1543
  • Code monkey
Re: POLL: What model to work on next?
« Reply #33 on: July 29, 2012, 02:10:58 PM »
I'm using ML2.3 for photography with:
EOS 600DML | EOS 400Dplus | EOS 5D MLbeta5- EF 100mm f/2.8 USM Macro  - EF-S 17-85mm f4-5.6 IS USM - EF 70-200mm f/4 L USM - 580EXII - OsX, PS, LR, RawTherapee, LightZone -no video experience-

csound

  • New to the forum
  • *
  • Posts: 24
Re: POLL: What model to work on next?
« Reply #34 on: July 31, 2012, 02:15:45 PM »
5dmk3!!
I definitely would donate again for that!
i

I'd be very happy to donate again if there was a specific fund set up to develop ML for Mk 3.
The Mk 3 has some great improvements over Mk 2 but the ML features in v. 2.3 would really bring it to a new level.
Hope there's some more news on this soon.

wave

  • New to the forum
  • *
  • Posts: 43
Re: POLL: What model to work on next?
« Reply #35 on: August 02, 2012, 02:03:51 PM »
+1
1100d :)

Pumpkinwaffle

  • New to the forum
  • *
  • Posts: 34
  • Waffles!
Re: POLL: What model to work on next?
« Reply #36 on: August 03, 2012, 11:40:11 AM »
I bought my 550D and will be happy with it for a while. (and any future purchase will probably depend on it's ML compatibility)

  But I have a friend who recently purchased a 1100D, I didn't tell him about ML yet as there is no stable port. I think enabling ML for lower end cameras would greatly help newcomers, art students, and others. Especially since those cameras lack most features (newer camera have audio levelling and other nice features already).

   Of course why focusing on old hardware that is to be abandoned by canon and the user eventually can be questioned. I just think that lower end cameras aren't only used by people without skill but also by people without money. The 1100D port is on it's way already, so maybe the EOS M, 5DmkIII  or 650D next.
   They all use the same processor, so I see those being part of a new generation of ML. But maybe I'm foreseeing too much without actual knowledge ^^
550D ~ canon 50mm 1.8 ~ canon EF-S 18-55mm ~ canon 35-80mm [macro moded]
http://pumpkinwaffle.deviantart.com/

Thomas650D

  • Just arrived
  • *
  • Posts: 1
Re: POLL: What model to work on next?
« Reply #37 on: August 06, 2012, 01:56:01 PM »
Hi developer team!

Please add the 650D next.
I think newcomers like me with this model would appreciate the use of Magic Lantern most.

Thanks!

Thomas

P.S. Of course I've voted for the 650D ;-)

GingertronMk1

  • New to the forum
  • *
  • Posts: 7
Re: POLL: What model to work on next?
« Reply #38 on: August 06, 2012, 05:09:27 PM »
1100D/T3 would make an excellent 'newbie' cam, or indeed could be picked up cheaply and used to experiment on.

sorna

  • New to the forum
  • *
  • Posts: 2
Re: POLL: What model to work on next?
« Reply #39 on: August 08, 2012, 10:32:50 PM »
Hi developer team!

Please add the 650D next.
I think newcomers like me with this model would appreciate the use of Magic Lantern most.

Thanks!

Thomas

P.S. Of course I've voted for the 650D ;-)

+1. I voted for 650D as well

oreygallardo

  • Just arrived
  • *
  • Posts: 1
Re: POLL: What model to work on next?
« Reply #40 on: August 14, 2012, 06:59:25 AM »
Hi! I have a 60D and I love how ML works on it, have yet to try the 2.3 version though.

Also, I just bought a 650D as a backup body and I was hoping it could also have ML sometime soon. I hope Canon releases the much needed firmware update (so they can fix the HDMI issues and also return 3x factor) :P

InFocusAV

  • New to the forum
  • *
  • Posts: 15
Re: POLL: What model to work on next?
« Reply #41 on: August 14, 2012, 08:15:31 AM »
Please work on getting a stable ML Version for the t4i. Can you manipulate the length of time you can record for in video mode because I would love to have the 29 min 59 seconds extended even further so I can use it as a locked down shot for weddings that would record start to finish?

sicetime

  • Freshman
  • **
  • Posts: 53
  • 5D III
Re: POLL: What model to work on next?
« Reply #42 on: August 14, 2012, 10:16:51 PM »
5D mk 3 please!

Dimchek

  • New to the forum
  • *
  • Posts: 3
Re: POLL: What model to work on next?
« Reply #43 on: August 15, 2012, 09:02:40 AM »
5D Mk1 please, please, please!  :)

fugo

  • Just arrived
  • *
  • Posts: 1
Re: POLL: What model to work on next?
« Reply #44 on: August 15, 2012, 11:57:39 AM »
5d classic please! although looking at the poll i guess if it happens it will be a while :/

peet8989

  • Just arrived
  • *
  • Posts: 1
Re: POLL: What model to work on next?
« Reply #45 on: August 16, 2012, 05:26:16 PM »
hello my fellow friends of ML,


i've come to ask you nicely to start developing on ony digic 5 cam since the results should be easily portable to other cams of this "family".
I own a 650D and therefore would like to see ML running on this cam as soon as possible :)

the vote as been open now for ca. 2 months which should give a resonable average on users' needs.

to conclude the poll:
51,4 % (650D + 5D3) of all votes are for a digic 5 port of ML, prior of adding new features :)

sure, i would support the "more features gang" if i had a cam already running ML...
but please, open the door for lots of new users and potential devs by supporting new models.

best regards
peet


privi

  • Just arrived
  • *
  • Posts: 1
Re: POLL: What model to work on next?
« Reply #46 on: August 16, 2012, 07:11:28 PM »
7D please...

sito

  • Just arrived
  • *
  • Posts: 1
Re: POLL: What model to work on next?
« Reply #47 on: August 21, 2012, 01:08:06 AM »
650D aka T4i please!

musicbase

  • New to the forum
  • *
  • Posts: 3
  • I'm a newbie
Re: POLL: What model to work on next?
« Reply #48 on: August 21, 2012, 01:40:19 AM »
650D please!

Thomas

  • Just arrived
  • *
  • Posts: 1
Re: POLL: What model to work on next?
« Reply #49 on: August 21, 2012, 09:01:50 AM »
650D Please!!!

Thank you very much for your hard work!