Author Topic: 7D Raw Thread  (Read 549124 times)

feureau

  • Hero Member
  • *****
  • Posts: 604
Re: 7D Raw Thread
« Reply #900 on: September 10, 2013, 06:45:05 AM »
Thanks

britom

  • Member
  • ***
  • Posts: 113
Re: 7D Raw Thread
« Reply #901 on: September 10, 2013, 10:08:17 AM »
Here's a build using 0x05 wich is also free:

src/edmac-memcpy.c
Code: [Select]
#elif defined(CONFIG_7D)
uint32_t edmac_read_chan = 0x19;
uint32_t edmac_write_chan = 0x05;

https://www.dropbox.com/s/0452mx31r43pegx/ML_britom_10_Sep_2013_.zip

Updated here too: http://www.magiclantern.fm/forum/index.php?topic=7987

Hopefully we get less pink frames. Still need to test from 0x07 to 0x15
Built from 1% repository https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/overview

USE AT YOUR OWN RISK! :P
7D Builds with RAW support: http://bit.ly/14Llzda

alsey7

  • Freshman
  • **
  • Posts: 54
Re: 7D Raw Thread
« Reply #902 on: September 10, 2013, 10:29:46 AM »
gonna try this
thx

mikhailbphoto

  • Just arrived
  • *
  • Posts: 1
Re: 7D Raw Thread
« Reply #903 on: September 10, 2013, 11:46:05 AM »
Hi,

I have one question regarding fps override.. How do i change the fps when shooting raw?

and btw my first raw video.
www.mikhailbphoto.com

fpena06

  • New to the forum
  • *
  • Posts: 42
  • 7D
Re: 7D Raw Thread
« Reply #904 on: September 10, 2013, 12:05:19 PM »
Not different than you would with a regular video. Do you have the new autoexec.fir 1% recently release?

fpena06

  • New to the forum
  • *
  • Posts: 42
  • 7D
Re: 7D Raw Thread
« Reply #905 on: September 10, 2013, 12:08:21 PM »
Check post #854

carniolus

  • New to the forum
  • *
  • Posts: 13
Re: 7D Raw Thread
« Reply #906 on: September 10, 2013, 12:49:10 PM »
Here's a build using 0x05 wich is also free:

src/edmac-memcpy.c
Code: [Select]
#elif defined(CONFIG_7D)
uint32_t edmac_read_chan = 0x19;
uint32_t edmac_write_chan = 0x05;

https://www.dropbox.com/s/0452mx31r43pegx/ML_britom_10_Sep_2013_.zip

Updated here too: http://www.magiclantern.fm/forum/index.php?topic=7987

Hopefully we get less pink frames. Still need to test from 0x07 to 0x15
Built from 1% repository https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/overview

USE AT YOUR OWN RISK! :P

Hello!

Can I install last updated version without previos version on my 7D - like clean install?
Thanks.

fpena06

  • New to the forum
  • *
  • Posts: 42
  • 7D
Re: 7D Raw Thread
« Reply #907 on: September 10, 2013, 01:03:54 PM »
Hello!

Can I install last updated version without previos version on my 7D - like clean install?
Thanks.

I have in the past. Clean install and copy new files to card.

RenatoPhoto

  • Moderators
  • Hero Member
  • *****
  • Posts: 1509
  • 5DM3 / 7D
Re: 7D Raw Thread
« Reply #908 on: September 10, 2013, 01:27:23 PM »
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

JCBEos

  • Freshman
  • **
  • Posts: 54
  • MACRO. That's it.
Re: 7D Raw Thread
« Reply #909 on: September 10, 2013, 05:08:49 PM »
Just bought a Lexar 1000x CF... can't wait to test it :)
My Youtube Channel -> comments and likes welcome ;)

arrinkiiii

  • Hero Member
  • *****
  • Posts: 1104
  • ML ADDICTED 7D & 5D III
Re: 7D Raw Thread
« Reply #910 on: September 10, 2013, 05:32:21 PM »
Some problems that i found using the latest build from 1%:

-My card is slow, so i record at 1728x736  /  2.35:1  Sometimes it give's me continuous recording, something not. Maybe need warming up the card...

-Wend turn on the camera fps override don't show up but after change some settings in ML menu it shows up and i can enable and chose the fps that i want. If i use the .fir and update it will show the fps override as should be. Know everytime that i turn on the camera i got the option for fps override. But don't know if works good because i can record with a higher resolution in x5.

-Wend i record with x5 it only record the zoom and the dng's it will be with the same resolution, 1728x736. I try with raw and mlv and it's the same. I formatted the card and use eoscard and then just copy the last build to the card and the same happen. I always disable the x10, maybe because of this? Will do more test for see if it's from there.

-I have just manage to record real x5 with fps override one time, i chose 23,976 but wend i start to record just show up saying 20.and something fps.

-In fps override what option i should pick, for getting 23,976 after i chose my fps?  Low light, Exact fps, low jello, 180d or hijello, fastTv?

-It's not possible to get better quality in the x5 black & white preview?



*Amazing work and for sure huge challenge for 1%  :D

mucher

  • Member
  • ***
  • Posts: 121
Re: 7D Raw Thread
« Reply #911 on: September 10, 2013, 05:48:06 PM »
Great work. This thing is getting sweeter and sweeter.

I don't understand the fps overide mechanism very well, but it seems to me that it will drop fps and even shutter speed to suit its purposes, so I just choose "exact fps" hopefully to lock on the fps.

arrinkiiii

  • Hero Member
  • *****
  • Posts: 1104
  • ML ADDICTED 7D & 5D III
Re: 7D Raw Thread
« Reply #912 on: September 10, 2013, 06:05:04 PM »

Yes, i also choose "exact fps"  but it will record at 23.976 (i chose that) or with "exact fps" will record at 24 fps ?

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: 7D Raw Thread
« Reply #913 on: September 10, 2013, 06:10:33 PM »
Exact FPS is the nicest.. it gives you 23.976, only works when you load the fir, no way to change that yet. You have to change your resolution to be higher when switching to 5X mode otherwise it will record at the same res you picked for normal LV.

No real way to speed up or better the overlay preview.. thats as fast as the camera can make it... this is how fast any "real time" compression or image manipulation would work.

Quote
I always disable the x10

Until I find a fix I'd say disable it, doesn't play nice with the display filters.

arrinkiiii

  • Hero Member
  • *****
  • Posts: 1104
  • ML ADDICTED 7D & 5D III
Re: 7D Raw Thread
« Reply #914 on: September 10, 2013, 06:50:46 PM »

Thank you master one percent. You rock big time  :D

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: 7D Raw Thread
« Reply #915 on: September 10, 2013, 07:34:35 PM »
I fixed the audio too now.. except I have to make the "headphone" thing clear the screen... maybe just cache hack it from detecting in the first place? All the other features appear to be working, was a little bit of trouble since I couldn't correctly fake the audio task.

P.S. I found out how to get into 10x....

Turn on display filters and go in/out of the mL menu then zoom in... also you can do it with the grayscale preview on  the same way. Getting out is a little harder... not convenient so far but useable. Really weird bug.

arrinkiiii

  • Hero Member
  • *****
  • Posts: 1104
  • ML ADDICTED 7D & 5D III
Re: 7D Raw Thread
« Reply #916 on: September 10, 2013, 07:45:42 PM »

I think i will thank you 5 in 5 minutes  :D

hbr

  • New to the forum
  • *
  • Posts: 27
  • EOS 7D
Re: 7D Raw Thread
« Reply #917 on: September 10, 2013, 08:50:14 PM »
Is it just me or there is no motion blur while recording raw video...like there is no motion blur at all... Even if I drop the shutter speed to like 50 . . .?

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: 7D Raw Thread
« Reply #918 on: September 10, 2013, 09:11:59 PM »
So I got arrow shortcuts back + force LV and its working with audio... didn't check while recording... I guess for headphones you can just plug in to monitor and then unplug for now.

It doesn't seem like there is motion blur but a lot of rolling shutter... I took some stuff walking around yesterday and it looks better than 50D, both the short 2k clips and the normal LV ones. I think resizing + the sensor is slightly better, wish it performed as well.. I've still yet to see an 80Mb/s

http://www.filedropper.com/7daudiocontrolsfirbin

Check and see if anything except 10X is broken.

vnguyen972

  • Freshman
  • **
  • Posts: 72
Re: 7D Raw Thread
« Reply #919 on: September 10, 2013, 09:40:05 PM »
So... I follow these threads and got lost in some of the technical info... With 1% build, I see an autoexec.fir file... how do I use that? I read that is for the fps override.. and have to run manually? I put it on my card and I see that option so I'm not sure I understood it correctly.

With 1% new build above, I can record audio with the raw file? how would I use it?

Thanks so much.
Love my EOS7D!

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: 7D Raw Thread
« Reply #920 on: September 10, 2013, 09:54:56 PM »
Quote
With 1% new build above, I can record audio with the raw file? how would I use it?

I tried... it loses wav data... record a wav from the sound recorder at the same time and you'll see. It would have to be rewritten to use edmac_memcpy_ *AND* probably use different edmac channels.

But H264 audio should work and so should wav audio (even if its grayed out bitching about canon audio). So you have sound recorder/ wav + h264/ embedded H264.

Quote
read that is for the fps override.. and have to run manually?

The normal bin boots at start, you can do non master things... ie record raw, take photos/etc. To get FPS override (etc) to work you have to go run "firmware update" and it will restart + load on the master and slave together.


vnguyen972

  • Freshman
  • **
  • Posts: 72
Re: 7D Raw Thread
« Reply #921 on: September 10, 2013, 10:08:04 PM »
The normal bin boots at start, you can do non master things... ie record raw, take photos/etc. To get FPS override (etc) to work you have to go run "firmware update" and it will restart + load on the master and slave together.

forgive me for asking one more question, how does one verify if FPS override actually working?
Love my EOS7D!

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: 7D Raw Thread
« Reply #922 on: September 10, 2013, 10:10:29 PM »
I'd say there are 2 ways, see if the video hack menu says video hacks not available in this release (rpc is off, fps doesn't work) and/or turn down the FPS to like 2, you should see lag.

vnguyen972

  • Freshman
  • **
  • Posts: 72
Re: 7D Raw Thread
« Reply #923 on: September 10, 2013, 10:15:47 PM »
Thank you so much 1%!!!
Love my EOS7D!

greglory

  • Just arrived
  • *
  • Posts: 1
Re: 7D Raw Thread
« Reply #924 on: September 10, 2013, 10:29:43 PM »
I'm very new to the raw feature.  Does the FPS override apply to shooting 60fps or is that still controlled by selecting 720 recording function?  Thanks