6D - Install guide and raw shooting.

[random]

So how about losing resolution using the dualISO process. Is it still worth the result?

I like shooting 1536x658, could I also do that in dualISO or does it also affect the possible resolution in continious shooting?

[Exile]

Hey noisyboy thanks for this handy tutorial!

Q: if i wanted to test the new dual iso ML can i just simply follow your tutorial and replace the ML thats put on in step 13?

[1%]

I don't think there is much resolution loss. It shouldn't affect transfer rate but post processing work-flow might be annoying.

[leothelion]

Hey guys,

Does this look right?

The quality of the image is coming out like this http://imageshack.us/photo/my-images/600/sqes.png/.

When I import it to raw2dng here is what I get.
Once I drop the RAW file it looks like this:
http://imageshack.us/photo/my-images/401/0143.png/

Then during the process it looks like this:
http://imageshack.us/photo/my-images/821/f2o8.png/

Then at the end it looks like this:
http://imageshack.us/photo/my-images/208/4dm.png/


I installed ML on the 6D as described here.

[széna]

Hi Guys,
I'm in trouble...
I try to install ML to my 6D but I jammed at STEP 7!
I put the sd card and I try to update the firmware but camera say:

Update file cannot be found.
Please check the memory card reload the battery and try again.

I do everything when noisyboy wrote (formated card, I copy the files: folder ML, file 6D-112.fir and autoexec to the route directory etc...)

HELP ME PLS!

THX!
-széna

[noisyboy]

Hey noisyboy thanks for this handy tutorial!

Q: if i wanted to test the new dual iso ML can i just simply follow your tutorial and replace the ML thats put on in step 13?

Hey bud! You're welcome! Sorry but I've been so busy filming the last month or so that I still haven't tried any of the cool dual iso stuff out for myself yet so one of the other guys might have to answer this as I need to do lots of catching up In fact last time I checked it wasn't available for the 6D it's been that long! Does this work now 1%? Cheers man!

[noisyboy]

Hi Guys,
I'm in trouble...
I try to install ML to my 6D but I jammed at STEP 7!
I put the sd card and I try to update the firmware but camera say:

Update file cannot be found.
Please check the memory card reload the battery and try again.

I do everything when noisyboy wrote (formated card, I copy the files: folder ML, file 6D-112.fir and autoexec to the route directory etc...)

HELP ME PLS!

THX!
-széna

Which firmware version do you currently have installed dude?

[széna]

Which firmware version do you currently have installed dude?

I didn't updated firmware - so I have 1.1.2

I made STEP 4, it's OK. But that's all.

Thank you for your quick answer noisyboy!

[noisyboy]

No problem man  Let me just re-download my zip file and I'll be right with you...

[noisyboy]

What SD Card are you using dude?

[széna]

What SD Card are you using dude?

SanDisk 64GB ULTRA 30MB/s it's SDXC I

[noisyboy]

SanDisk 64GB ULTRA 30MB/s

That might be your problem. Do you have a card that isn't 64GB?

[széna]

That might be your problem. Do you have a card that isn't 64GB?

uhhh... no, but I will buy tomorrow.

[noisyboy]

uhhh... no, but I will buy tomorrow.

Just buy a super cheap 4GB card or something just to do the install. I'm pretty certain that using the 64GB card is your problem man Good luck!

[széna]

Just buy a super cheap 4GB card or something just to do the install. I'm pretty certain that using the 64GB card is your problem man Good luck!

OK I will!
Thank you very much!

[1%]

Yep, have dual ISO on everything.

[noisyboy]

Sweeeeet Epic work man!

[Exile]

Hey bud! You're welcome! Sorry but I've been so busy filming the last month or so that I still haven't tried any of the cool dual iso stuff out for myself yet so one of the other guys might have to answer this as I need to do lots of catching up In fact last time I checked it wasn't available for the 6D it's been that long! Does this work now 1%? Cheers man!

Filming is good Thanks for your reply. I was not sure if I had to downgrade the firmware or if I could run the dual iso version on 1.1.3
 so now I simply leave it to1.1.3 and replace the ML folder and the bin file?

[noisyboy]

To update magic lantern to the latest build simply replace the files on the SD card with the latest from 1%'s Bitbucket (at the top of the list and will have [6D] in the zips file name). No need to change your firmware unless you are currently on version 1.1.2 if you are on 1.1.3 just replace files

[Exile]

Thanks for the confirmation! I'm not quite used to this pre Alpha stuf, I have only ran
2.3 on 60d but now i'm kinda used to the extra's ML brings

[széna]

Just buy a super cheap 4GB card or something just to do the install. I'm pretty certain that using the 64GB card is your problem man Good luck!

Hello again!
So, I bought an 4 GB card and I can "install" ML on my 6D!
But...
There is something problem I think... At button Q - ML menubar is gone - it's OK. But if I set raw video the 6D go crazy. ML send lot of messages and this box not gone. It's cover half of screen and infos are flashing and I can make only 1-2 second long raw videos.
The red card reading light is flashing constantly too. is it normal?
Finally I have err 70 message and I have to switch off my camera.
http://kepfeltoltes.hu/130819/422121288image_www.kepfeltoltes.hu_.jpg

[RTI]

Hello again!
So, I bought an 4 GB card and I can "install" ML on my 6D!
But...
There is something problem I think... At button Q - ML menubar is gone - it's OK. But if I set raw video the 6D go crazy. ML send lot of messages and this box not gone. It's cover half of screen and infos are flashing and I can make only 1-2 second long raw videos.
The red card reading light is flashing constantly too. is it normal?

I think your card is not that good (if you've used that 4GB) to support raw recording. You'll need to use a fast SD card.
The reason to use a 4GB card was for the sole purpose of installing ML on your camera, you'll need to prepare another card with all the files specified.

[széna]

I think your card is not that good (if you've used that 4GB) to support raw recording. You'll need to use a fast SD card.
The reason to use a 4GB card was for the sole purpose of installing ML on your camera, you'll need to prepare another card with all the files specified.

I used 4GB card only for "installing".
I formated my 64GB ultra sandisc (30mb/sec) to try making raw videos.

[széna]

I think your card is not that good (if you've used that 4GB) to support raw recording. You'll need to use a fast SD card.
The reason to use a 4GB card was for the sole purpose of installing ML on your camera, you'll need to prepare another card with all the files specified.

What is the highest resolution and bit rate what can I set in safe for making raw videos?

[RTI]

What is the highest resolution and bit rate what can I set in safe for making raw videos?

Hi,
you might want to take a look at this chart - http://blog.planet5d.com/wp-content/uploads/Twitter-_-autoexec_bin_-Updated-raw-chart-still-need-....jpg

You need a card that is able to write data @45Mb (a Sandisk extreme is recommended) - 1592*896 is reported to be continuous  @24p