Author Topic: 6D - Install guide and raw shooting.  (Read 172688 times)

William Dio

  • New to the forum
  • *
  • Posts: 6
  • 6D
Re: 6D - Install guide and raw shooting.
« Reply #325 on: July 10, 2013, 07:46:11 PM »
So, the zoom mode basically allows us to get higher resolution but it crops the image? (I'm sorry, as I said, I didn't really seem to understand that part) Does it have an impact on the moire issue?
He who controls information controls the universe.

xNiNELiVES

  • Senior
  • ****
  • Posts: 461
  • 5D II, 17-35mm F2.8L, 50mm F1.4, 70-200 F4L
Re: 6D - Install guide and raw shooting.
« Reply #326 on: July 10, 2013, 08:44:39 PM »
It's main use was originally to be able to zoom in 3x but yes it is also used for obtaining higher resolutions. I believe moire is slightly but negligibly worse.

William Dio

  • New to the forum
  • *
  • Posts: 6
  • 6D
Re: 6D - Install guide and raw shooting.
« Reply #327 on: July 10, 2013, 08:51:47 PM »
Thanks for that clarification, xNiNELiVES! I'll see what I can do with it once I've installed ML and played with it for a while.

How long would you say the installation takes (for someone who's not new to hacking devices...) ?
He who controls information controls the universe.

xNiNELiVES

  • Senior
  • ****
  • Posts: 461
  • 5D II, 17-35mm F2.8L, 50mm F1.4, 70-200 F4L
Re: 6D - Install guide and raw shooting.
« Reply #328 on: July 10, 2013, 09:11:42 PM »
Thanks for that clarification, xNiNELiVES! I'll see what I can do with it once I've installed ML and played with it for a while.

How long would you say the installation takes (for someone who's not new to hacking devices...) ?

Well I've never hacked anything by myself but I'm quite good with computers. It took me 10 min with this guide.

DerekDock

  • Freshman
  • **
  • Posts: 59
Re: 6D - Install guide and raw shooting.
« Reply #329 on: July 11, 2013, 03:19:33 AM »
Posted this in the other thread but if the devs want to take a look at my error logs.
https://www.dropbox.com/s/he6nmk8mll94k50/Archive.zip

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: 6D - Install guide and raw shooting.
« Reply #330 on: July 11, 2013, 03:47:10 AM »
Quote
ML ASSERT:
(int)state <= max_job_state
at ../../src/lens.c:1995 (_prop_handler_PROP_LAST_JOB_STATE), task PropMgr
lv:0 mode:3


What were you doing when this happened? I've been trying to track this one down.
I see a memory.c error when you autoloaded or loaded too many modules at once, etc.

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: 6D - Install guide and raw shooting.
« Reply #331 on: July 11, 2013, 06:22:06 AM »
You can ignore that one. There may be surprises when doing bracketing (either slowdown, or some settings failing to change, or nothing noticeable at all).

ilguercio

  • Hero Member
  • *****
  • Posts: 845
Re: 6D - Install guide and raw shooting.
« Reply #332 on: July 11, 2013, 09:13:50 AM »
Up and running! :D
Canon EOS 6D, 60D, 50D.
Sigma 70-200 EX OS HSM, Sigma 70-200 Apo EX HSM, Samyang 14 2.8, Samyang 35 1.4, Samyang 85 1.4.
Proud supporter of Magic Lantern.

William Dio

  • New to the forum
  • *
  • Posts: 6
  • 6D
Re: 6D - Install guide and raw shooting.
« Reply #333 on: July 11, 2013, 03:51:55 PM »
You can ignore that one. There may be surprises when doing bracketing (either slowdown, or some settings failing to change, or nothing noticeable at all).

Is that a big issue? I use bracketing regularly.
He who controls information controls the universe.

ilguercio

  • Hero Member
  • *****
  • Posts: 845
Re: 6D - Install guide and raw shooting.
« Reply #334 on: July 11, 2013, 05:12:40 PM »
I got err70 tonight, is it because i am running older APIs for the modules?
[spoiler]Fri Jul 12 00:15:18 2013
      0:    42.624 [STARTUP]
K302 ICU Firmware Version 1.1.3 ( 5.7.4 )
      1:    42.652 [STARTUP]
ICU Release DateTime 2013.02.28 18:02:17
      2:    42.922 [SEQ] CreateSequencer (Startup, Num = 6)
      3:    43.090 [SEQ] NotifyComplete (Cur = 0, 0x10000, Flag = 0x10000)
      4:    44.517 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41744000
      5:    45.188 [PROPAD] SerialFlash Packages!! 0x10000
      6:    45.813 [SF] readManufactureCodeSerialFlash 0xc2
      7:    45.822 [SF] MACRONIX
      8:    46.107 [SEQ] seqEventDispatch (Startup, 0)
      9:    46.129 [STARTUP] startupEntry
     10:   112.724 [PROPST] Initialize Adjective & Situation
     11:   113.224 [PROPST] @@@ dwHdmiPhysicalConnect = 0(960)
     12:   113.513 [HPD] HotPlug WifiSetting = 0
     13:   113.587 [HPD] CreateTask Master End
     14:   114.299 [SEQ] NotifyComplete (Cur = 1, 0x2, Flag = 0x2)
     15:   114.991 [PROPST] dwNewAeModeDial = 3
     16:   115.053 [PROPST] ChangeAEMode -> 3 @AE_MODE_DIAL
     17:   115.140 [PROPST] Active Adjective & Situation 3->3
     18:   115.199 [PROPST] ReqChangeCBR : Adjective 0, 0
     19:   115.222 [PROPST] Not ExecMultiConvert Already None : Adjective 0, 0
     20:   115.334 [PROPST] Not ExecMultiConvert : Situation 0
     21:   115.387 [PROPST] Initialize FlaverPCValid 1 (1)
     22:   115.423 [PROPST] Initialize FlaverPCValid 2 (1)
     23:   115.459 [PROPST] Initialize FlaverPCValid 3 (1)
     24:   115.510 [PROPST] !! Convert End !!
     25:   116.093 [PRP] Deliv WaitID = 0x80000001, 0xFF228B1C(1)
     26:   117.556 [PROPAD] SerialFlash Packages!! 0x7
     27:   117.643 [PROPAD] pFromProperty->pNextWriteAddress 0x10000
     28:   117.710 [STARTUP] startupPropAdminMain : End
     29:   117.792 [SEQ ERROR] NotifyComplete (Cur = 1, 0x0, Flag = 0x20000000)
     30:   118.999 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0x1 zoom 0x0
     31:   120.140 [PRP] Complete WaitID = 0x80000001, 0xFF228B1C(0)
     32:   120.192 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 2478
     33:   120.482 [PRP] ALERT DELIVER ARRAY 30
     34:   121.474 [PRP] LV_CFilter : kind 0 hv 0
     35:   121.498 [PRP] Level 0 0 0 0 0 0 0 0
     36:   121.634 [HPD] HotPlug WifiSetting = 0
     37:   122.318 [PROPST] StartupCondition : 1, 0
     38:   122.570 [EM] emSlaveChangeCBR : AUTO_POWEROFF (1)
     39:   122.647 [EM] emSlaveChangeCBR : UILOCK (0x0)
     40:   122.834 [SEQ] seqEventDispatch (Startup, 1)
     41:   122.866 [STARTUP] startupPrepareProperty
     42:   123.150 [STARTUP] PROP_GPS_AUTO_TIME_SETTING 1
     43:   123.270 [SEQ] NotifyComplete (Cur = 2, 0x20420110, Flag = 0x20000000)
     44:   123.293 [STARTUP] startupPrepareCapture : CLASSID_FLAG_PROPAD
     45:   123.325 [FM] FM_Initialize (0, 1, 0)
     46:   123.531 [FM] fmResultCBR (0x5a1c54)
     47:   124.355 [FM] PROP_HDD_DCIM_PATH (/)
     48:   124.608 [FC] FC_Initialize [drive:3][ClassID:39]
     49:   124.969 [RTC] PROPAD_GetPropertyData : PROP_TIME_ZONE 4
     50:   125.028 [RTC] PROPAD_GetPropertyData : PROP_SUMMERTIME_SETTING 0
     51:   125.460 [RTC] ChangePropertyCBR 0x0, 0x6000
     52:   126.835 [SND] Seq LPC 5-0
     53:   126.862 [SND]  HARB_ARBMODE  Before:0x00000001 Current:0x00000000
     54:   126.894 [SND]  HARB_HARBCTRL Before:0x2AAAAAE8 Current:0x2AAAAAE8
     55:   126.902 [SND] Seq LPC 5-1
     56:   126.934 [SND] Seq LPC 5-2
     57:   126.967 [SND] Seq LPC 5-3
     58:   126.985 [SND] Seq LPC 5-4
     59:   126.992 [SND] Seq LPC 5-5
     60:   127.002 [SND] Seq LPC 5-6
     61:   127.414 [SND] Seq LPC 5-7
     62:   127.425 [SND] Seq LPC fin
     63:   128.584 [RSC] hMemoryQueue (0x800010) hStorageQueue (0x820012)
     64:   130.004 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0x1 zoom 0x0
     65:   132.061 [STARTUP] PROP_GPS_AUTO_TIME_SETTING 1
     66:   133.183 [PRP] LV_CFilter : kind 0 hv 0
     67:   133.218 [PRP] Level 0 0 0 0 0 0 0 0
     68:   133.396 [HPD] HotPlug WifiSetting = 0
     69:   134.279 [PRP] Complete WaitID = 0x8000003F, 0x00000000(0)
     70:   134.835 [PRP] Complete WaitID = 0x80000045, 0x00000000(0)
     71:   135.370 [PRP] Complete WaitID = 0x8003006F, 0x00000000(0)
     72:   136.043 [RSC] MemoryStatusMasterResultCBR
     73:   136.408 [RSC] ### LIST 8 0 8 ###
     74:   136.458 [RSC] AllocateMemoryUnit For ExMem1
     75:   136.476 [RSC] AllocateMemoryUnit For ExMem1
     76:   136.489 [RSC] AllocateMemoryUnit For ExMem1
     77:   136.502 [RSC] AllocateMemoryUnit For ExMem1
     78:   136.532 [RSC] AllocateMemoryUnit For OnlyMem1
     79:   136.543 [RSC] AllocateMemoryUnit For OnlyMem1
     80:   136.554 [RSC] AllocateMemoryUnit For OnlyMem1
     81:   136.567 [RSC] AllocateMemoryUnit For OnlyMem1
     82:   136.624 [RSC] #Add [ FreeUnit 4 AddNum 0 ]
     83:   136.666 [RSC] #Add1[ 0-> Unit 006c3600 Address 52400000 SubUnit 15]
     84:   136.705 [RSC] #AddB[ 0-> Unit 006c3600 Address 52400000 ]
     85:   136.735 [RSC] #Add1[ 1-> Unit 006c35e4 Address 50000000 SubUnit 15]
     86:   136.769 [RSC] #AddB[ 1-> Unit 006c35e4 Address 50000000 ]
     87:   136.800 [RSC] #Add1[ 2-> Unit 006c35c8 Address 4d400000 SubUnit 15]
     88:   136.832 [RSC] #AddB[ 2-> Unit 006c35c8 Address 4d400000 ]
     89:   137.359 [PROPST] dwNewAeModeDial = 3
     90:   137.404 [PROPST] ChangeAEMode -> 3 @AE_MODE_DIAL
     91:   137.446 [PROPST] !! Convert End !!
     92:   137.882 [PRP] Deliv WaitID = 0x80000001, 0xFF228B1C(1)
     93:   138.182 [PRP] Complete WaitID = 0x80000001, 0xFF228B1C(0)
     94:   138.219 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 2478
     95:   138.324 [RSC] #Add1[ 3-> Unit 006c35ac Address 4b000000 SubUnit 15]
     96:   138.370 [RSC] #AddB[ 3-> Unit 006c35ac Address 4b000000 ]
     97:   138.389 [RSC] #Add2[ FreeUnit 4 ]
     98:   138.930 [RSC] MemMgr(IMAGE) 0 1
     99:   138.949 [RSC] MemMgr(IMAGE) 0 0
    100:   138.960 [RSC] MemMgr(IMAGE) 0 6
    101:   138.971 [RSC] MemMgr(IMAGE) 0 0
    102:   139.027 [RSC] ---- MODE[0 0 0]
    103:   139.258 [RSC] RearrangeMemMgr 0 3
    104:   139.324 [RSC] PROP_MEMORY_STATUS(SELF) (10->)13 (OTHER) 13
    105:   139.343 [RSC] Deliver PROP_MEMORY_STATUS 13
    106:   139.698 [RSC] ClearBusy(0x1) 0x40->0x40,0x0(0x40)[0,0]
    107:   139.785 [RSC] ### SRMExMem1_1State Event 0 Result State 0->6 ###
    108:   140.274 [RSC] ### SRMExMem1_1State Event 4 Result State 6->6 ###
    109:   140.488 [RSC] ---- MODE[0 0 0]
    110:   140.748 [RSC] ClearBusy(0x1) 0x40->0x40,0x0(0x40)[0,0]
    111:   140.970 [RSC] this->dwCardStatus[0] = 0x0(603)
    112:   141.189 [RSC] ---- MODE[0 0 0]
    113:   141.501 [RSC] ClearBusy(0x1) 0x40->0x40,0x0(0x40)[0,0]
    114:   141.688 [RSC] this->dwCardStatus[1] = 0x0(603)
    115:   141.903 [RSC] ---- MODE[0 0 0]
    116:   142.163 [RSC] ClearBusy(0x1) 0x40->0x40,0x0(0x40)[0,0]
    117:   142.345 [RSC] this->dwCardStatus[2] = 0x0(603)
    118:   142.548 [RSC] ---- MODE[0 0 0]
    119:   142.806 [RSC] ClearBusy(0x1) 0x40->0x40,0x0(0x40)[0,0]
    120:   142.994 [RSC] PROP_PC_HDD_STATUS = 0x1
    121:   143.371 [RSC] ---- MODE[0 0 0]
    122:   143.638 [RSC] ClearBusy(0x1) 0x40->0x40,0x0(0x40)[0,0]
    123:   143.994 [RSC] AddExMem1UnitToShootMemoryObject 0 4
    124:   144.049 [RSC] AddExMem1UnitToShootMemoryObject 0 4
    125:   144.099 [RSC] AddExMem1UnitToShootMemoryObject 0 4
    126:   144.146 [RSC] AddExMem1UnitToShootMemoryObject 0 4
    127:   144.198 [RSC] ClearBusy(0x1) 0x40->0x40,0x0(0x40)[0,0]
    128:   144.230 [RSC] ### SRMExMem1_1State Event 5 Result State 6->1 ###
    129:   144.431 [RSC] ---- MODE[0 0 0]
    130:   144.738 [RSC] RearrangeMemMgr 0 0
    131:   145.260 [RSC] ### SRMExMem1_1State Event 5 Result State 1->1 ###
    132:   145.521 [RSC] ---- MODE[0 0 0]
    133:   146.552 [RSC] ### SRMExMem1_1State Event 5 Result State 1->1 ###
    134:   146.779 [RSC] ---- MODE[0 0 0]
    135:   147.247 [RSC] PROP_SAVE_MODE = 0x1
    136:   147.470 [RSC] PROP_CARD0_FOLDER_NUMBER
    137:   147.650 [RSC] PROP_CARD1_FOLDER_NUMBER
    138:   147.830 [RSC] PROP_CARD2_FOLDER_NUMBER
    139:   148.425 [RSC] PROP_NUMBER_OF_CONTINUOUS_MODE BaseDcfNo 592
    140:   148.609 [RSC] ### SRMExMem1_1State Event 5 Result State 1->1 ###
    141:   148.828 [RSC] ---- MODE[0 0 0]
    142:   149.276 [RSC] ### SRMExMem1_1State Event 5 Result State 1->1 ###
    143:   149.489 [RSC] ---- MODE[0 0 0]
    144:   150.268 [RSC] ---- MODE[0 0 0]
    145:   150.555 [RSC] PROP_CARD_EXTENSION 0
    146:   152.061 [RSC] PC_CLUSTER_SIZE = 0x1000
    147:   152.724 [RSC] SetAutoIsoCode 0x70
    148:   152.748 [RSC] ChangeAutoIsoCode Factor:1 AutoIsoCode:112 -> 112
    149:   152.991 [RSC] SetAutoIsoCode 0x70
    150:   153.014 [RSC] ChangeAutoIsoCode Factor:2 AutoIsoCode:112 -> 112
    151:   153.439 [RSC] ---- MODE[0 0 0]
    152:   153.975 [RSC] ClearBusy(0x40000) 0x40->0x40,0x0(0x40)[0,0]
    153:   154.227 [RSC] ClearBusy(0x40000) 0x40->0x40,0x0(0x40)[0,0]
    154:   154.440 [RSC] ClearBusy(0x40000) 0x40->0x40,0x0(0x40)[0,0]
    155:   154.627 [RSC] ClearBusy(0x40000) 0x40->0x40,0x0(0x40)[0,0]
    156:   154.787 [RSC] SetAutoIsoCode 0x80
    157:   154.812 [RSC] ChangeAutoIsoCode Factor:0 AutoIsoCode:112 -> 128
    158:   155.111 [RSC] ### SRMExMem1_1State Event 5 Result State 1->1 ###
    159:   155.332 [RSC] ---- MODE[0 0 0]
    160:   155.846 [RSC] ### SRMExMem1_1State Event 5 Result State 1->1 ###
    161:   156.065 [RSC] ---- MODE[0 0 0]
    162:   156.572 [RSC] ### SRMExMem1_1State Event 5 Result State 1->1 ###
    163:   156.814 [RSC] ---- MODE[0 0 0]
    164:   157.589 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 128
    165:   157.776 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 128
    166:   158.491 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 128
    167:   158.898 [FM] FM_RegisterSpaceNotifyCallback
    168:   158.953 [MRK] MRK_RegisterSpaceNotifyCallback
    169:   158.987 [MRK] RegisterSpaceNotifyCallback : DriveNo = 2
    170:   159.016 [FM] voiRegisterSpaceNotifyCallback : DriveNo = 2
    171:   159.040 [AUDIO] [GPS] GPS_RegisterSpaceNotifyCallback
    172:   159.073 [FM] [GPS] gpsRegisterSpaceNotifyCallback : DriveNo = 2
    173:   159.097 [FM] RegisterSpaceNotifyCallback : DriveNo = 2
    174:   159.134 [FC] FcmcRegisterSpaceNotifyCallback : DriveNo = 2
    175:   159.156 [FM] FM_RegisterSpaceNotifyCallback
    176:   159.410 [JOB] InitializeJobClass (ID = 594, Num = 13)
    177:   159.555 [JOB] [BIND] dcsResultCBR (0x6c5014)
    178:   160.015 [JOB] PROP_GPS_INFORMATION fGPSConnect = 0x0
    179:   160.039 [JOB] MPU 0x0 USB 0x0 WFT 0x0 INNER 0x0
    180:   160.090 [JOB] PROP_MPU_GPS fGPSConnect = 0x0
    181:   160.106 [JOB] MPU 0x0 USB 0x0 WFT 0x0 INNER 0x0
    182:   160.259 [JOB] @@@setDefaultImgDirection
    183:   160.295 [JOB] PROP_GPS_DEVICE_ACTIVE INNER 0x0 fGPSConnect = 0x0
    184:   161.342 [JOB] PROP_BTDEVICE_CONNECT WFT 0x0 fGPSConnect = 0x0
    185:   161.795 [CERES]  RegisterGPSInfoCallback
    186:   162.201 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
    187:   162.370 [RSC] ### SRMExMem1_1State Event 6 Result State 1->1 ###
    188:   162.430 [RSC] ### SRMExMem1_1State Event 5 Result State 1->1 ###
    189:   162.651 [RSC] ---- MODE[0 0 0]
    190:   163.011 [RSC] ---- MODE[0 0 0]
    191:   163.441 [RSC] PROP_SAVE_MODE = 0x1
    192:   163.563 [RSC] ---- MODE[0 0 0]
    193:   164.295 [RSC] ---- MODE[0 0 0]
    194:   164.834 [JOB] InitializeInnerDevelopJobClass (ID = 594, Num = 16)
    195:   164.866 [JOB] InitializeMultipleExposureShootJobClass ( Num = 27,11 )
    196:   164.887 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 13 )
    197:   164.910 [JOB] InitializeHDRShootJobClass ( Num = 12 )
    198:   164.931 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 34 )
    199:   164.950 [JOB] InitializeGISShootJobClass ( Num = 12 )
    200:   164.972 [JOB] InitializeGISSaveAndEndJobClass ( Num = 25, 31 )
    201:   165.097 [TERM] terminateChangeCBR : SHUTDOWN (255)
    202:   165.110 [TERMINATE] SHUTDOWN init comp
    203:   165.180 [TERM] terminateChangeCBR : AUTO_POWEROFF (1)
    204:   165.222 [TERMINATE] Abort init comp
    205:   165.367 [SEQ] NotifyComplete (Cur = 2, 0x420110, Flag = 0x100)
    206:   165.425 [WFT]  TOM_Initialize
    207:   165.766 [WFT]  PROP_NETWORK_FTP (1)
    208:   166.141 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 158
    209:   166.244 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 158
    210:   166.332 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 158
    211:   166.732 [HDR] HDR_Initialize : Start
    212:   167.079 [RSC] ### SRMExMem1_1State Event 5 Result State 1->1 ###
    213:   167.218 [RSC] ---- MODE[0 0 0]
    214:   167.554 [HDR] ### HDRSetting Clear (OFF->OFF) ###
    215:   167.574 [HDR] ChangePropCBR HDRFunc 0
    216:   167.674 [HDR] NotifyUiLock 0
    217:   167.737 [HDR] HDRS_Initialize
    218:   167.760 [HDR] CreateStageClass
    219:   168.029 [HDR] HDRS_Initialize : End
    220:   168.045 [HDR] HDR_Initialize : End
    221:   168.065 [GIS] GIS_Initialize : Start
    222:   168.420 [RSC] ### SRMExMem1_1State Event 5 Result State 1->1 ###
    223:   168.552 [RSC] ---- MODE[0 0 0]
    224:   168.910 [GIS] ### GISSetting Clear (OFF->OFF) ###
    225:   168.930 [GIS] ChangePropCBR GISFunc 0
    226:   169.036 [GIS] NotifyUiLock 0
    227:   169.092 [GIS] GISS_Initialize
    228:   169.115 [GIS] CreateStageClass
    229:   169.383 [GIS] GISS_Initialize : End
    230:   169.396 [GIS] GIS_Initialize : End
    231:   169.541 [FM] PROP_CARD1_STATUS = 0x0
    232:   169.667 [FM] PROP_CARD1_FOLDER_NUMBER = 142
    233:   169.755 [FM] PROP_CARD1_FILE_NUMBER = 0
    234:   169.901 [FM] PROP_CARD2_STATUS = 0x0
    235:   169.990 [FM] PROP_CARD2_FOLDER_NUMBER = 100
    236:   170.057 [FM] PROP_CARD2_FILE_NUMBER = 592
    237:   170.161 [FM] PROP_CARD3_EXIST = 0
    238:   170.209 [FM] PROP_CARD3_STATUS = 0x0
    239:   170.275 [FM] PROP_CARD3_RECORD = 0 => 1
    240:   170.327 [FM] PROP_CARD3_FOLDER_NUMBER = 100
    241:   170.395 [FM] PROP_CARD3_FILE_NUMBER = 0
    242:   170.488 [FM] PROP_FILE_NUMBERING_MODE = 1, 0
    243:   170.539 [FM] PROP_CARD_EXTENSION = 0
    244:   170.593 [FM] PROP_CURRENT_MEDIA = 2
    245:   170.642 [FM] PROP_USBDEVICE_CONNECT = -1
    246:   170.692 [FM] PROP_NUMBER_OF_CONTINUOUS_MODE = 592
    247:   170.736 [SEQ] NotifyComplete (Cur = 2, 0x420010, Flag = 0x10)
    248:   170.801 [FM] PROP_DSDEFINE ModelId 80000302
    249:   170.858 [FM] PROP_APPENDMOVINFO Handle 0,205001d
    250:   170.881 [FM] PROP_APPENDMOVINFO VideoSnapMode 4,205001d
    251:   170.940 [FM] PROP_SPECIAL_OPTION = 24576
    252:   170.992 [FM] PROP_SCREEN_SAVER = 0
    253:   171.101 [FM] PROP_CARD3_EXIST = 0
    254:   171.152 [FM] PROP_CARD1_STATUS = 0x0
    255:   171.206 [FM] PROP_CARD2_STATUS = 0x0
    256:   171.252 [FM] PROP_CARD3_STATUS = 0x0
    257:   171.306 [FM] PROP_CARD_EXTENSION = 0
    258:   171.347 [FM] PROP_CURRENT_MEDIA = 2
    259:   171.478 [FM] PROP_CARD3_RECORD = 0 => 1
    260:   171.523 [FM] fmInitialized
    261:   171.597 [FC] _FC_SetDirSuffix (CANON)
    262:   171.674 [FM] fmPrepare
 [/spoiler]
Canon EOS 6D, 60D, 50D.
Sigma 70-200 EX OS HSM, Sigma 70-200 Apo EX HSM, Samyang 14 2.8, Samyang 35 1.4, Samyang 85 1.4.
Proud supporter of Magic Lantern.

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: 6D - Install guide and raw shooting.
« Reply #335 on: July 11, 2013, 05:19:05 PM »
What was the err 70? You cant load bolt rec + its raw rec and new raw_rec at the same time.

ilguercio

  • Hero Member
  • *****
  • Posts: 845
Re: 6D - Install guide and raw shooting.
« Reply #336 on: July 11, 2013, 05:22:01 PM »
ASSERT: FALSE
at ./ASIF/ASIF.c:383, task ASIF
lv:0 mode:3


Magic Lantern version : v2.3.NEXT.2013Jul02.6D113
Mercurial changeset   : e02c4335dbe1 (unified) tip
Built on 2013-07-02 21:42:36 by user@D610.
Free Memory  : 445K + 1394K


This is it. Can i disable bolt rec then?
Then, my modules are API 1.3 while 2.0 is expected. How to solve it?
Canon EOS 6D, 60D, 50D.
Sigma 70-200 EX OS HSM, Sigma 70-200 Apo EX HSM, Samyang 14 2.8, Samyang 35 1.4, Samyang 85 1.4.
Proud supporter of Magic Lantern.

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: 6D - Install guide and raw shooting.
« Reply #337 on: July 11, 2013, 05:32:54 PM »
You got err 70 from something else ... ie memory and then CPU reset taking off asif patches.

Just go into where the modules are and disable the ones you don't need.

ilguercio

  • Hero Member
  • *****
  • Posts: 845
Re: 6D - Install guide and raw shooting.
« Reply #338 on: July 11, 2013, 05:35:38 PM »
What about the older APIs i have?
Canon EOS 6D, 60D, 50D.
Sigma 70-200 EX OS HSM, Sigma 70-200 Apo EX HSM, Samyang 14 2.8, Samyang 35 1.4, Samyang 85 1.4.
Proud supporter of Magic Lantern.

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: 6D - Install guide and raw shooting.
« Reply #339 on: July 11, 2013, 05:50:47 PM »
If you have older api modules they won't load.

ilguercio

  • Hero Member
  • *****
  • Posts: 845
Re: 6D - Install guide and raw shooting.
« Reply #340 on: July 11, 2013, 05:53:12 PM »
Yeah, so where can i find the new ones?
I am downloading stuff from your Tragic Lantern.
Canon EOS 6D, 60D, 50D.
Sigma 70-200 EX OS HSM, Sigma 70-200 Apo EX HSM, Samyang 14 2.8, Samyang 35 1.4, Samyang 85 1.4.
Proud supporter of Magic Lantern.

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D

ilguercio

  • Hero Member
  • *****
  • Posts: 845
Canon EOS 6D, 60D, 50D.
Sigma 70-200 EX OS HSM, Sigma 70-200 Apo EX HSM, Samyang 14 2.8, Samyang 35 1.4, Samyang 85 1.4.
Proud supporter of Magic Lantern.

darkstarr

  • New to the forum
  • *
  • Posts: 38
Re: 6D - Install guide and raw shooting.
« Reply #343 on: July 11, 2013, 06:37:07 PM »
alright ML installed on 6D

Thanks folks

quick note to add: last step when running the eoscard.exe it didnt work when the card was formatted as fat32 and ntsc, only worked on exfat.
but its up and running now, didnt try raw yet i installed ML for focus peaking, cant live without it anymore!

shooting a music video tonight so we'll see how it goes,
there was a thread were people were discussing best h.264 settings (bitrate etc), but i cant seem to find that thread anymore.
anybody able to link me to it? :p

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: 6D - Install guide and raw shooting.
« Reply #344 on: July 11, 2013, 06:40:05 PM »
If they were the wrong version it wouldn't load and throw up an api error.

darkstarr

  • New to the forum
  • *
  • Posts: 38
Re: 6D - Install guide and raw shooting.
« Reply #345 on: July 11, 2013, 06:52:10 PM »
If they were the wrong version it wouldn't load and throw up an api error.

yea im not sure, when running the eoscard, after pressing SAVE it didnt do anything except "write successful" msg at the bottom.
but once formatted to exfat you would see it go through the files etc

thanks again all of you thats working hard on this!!!
keep up the excellent work


ilguercio

  • Hero Member
  • *****
  • Posts: 845
Re: 6D - Install guide and raw shooting.
« Reply #346 on: July 11, 2013, 07:07:10 PM »
If they were the wrong version it wouldn't load and throw up an api error.
The folder was not were it should have been...
My bad.
Now i need a decent SD card.
Canon EOS 6D, 60D, 50D.
Sigma 70-200 EX OS HSM, Sigma 70-200 Apo EX HSM, Samyang 14 2.8, Samyang 35 1.4, Samyang 85 1.4.
Proud supporter of Magic Lantern.

William Dio

  • New to the forum
  • *
  • Posts: 6
  • 6D
He who controls information controls the universe.

xNiNELiVES

  • Senior
  • ****
  • Posts: 461
  • 5D II, 17-35mm F2.8L, 50mm F1.4, 70-200 F4L
Re: 6D - Install guide and raw shooting.
« Reply #348 on: July 11, 2013, 08:01:15 PM »
I was looking at SD cards myself. Would one of these work?

http://www.amazon.com/SanDisk-Extreme-Class-Memory-SDSDX-064G-X46/dp/B0070WU51U/ref=sr_1_5?ie=UTF8&qid=1373562701&sr=8-5&keywords=sandisk+extreme+pro+64gb

Thats the exact SD card you should get. Any SanDisk Extreme (Tier 1, because there are now 80MB/s extreme cards) is exactly what you want. Its the most cost effective, but it also max's out the camera. Meaning that you could use a card that features like a gig per second transfer rate and it would perform the exact same as the SanDisk Extreme.

ilguercio

  • Hero Member
  • *****
  • Posts: 845
Re: 6D - Install guide and raw shooting.
« Reply #349 on: July 12, 2013, 05:33:35 AM »
Iso performance is unbelievable, i'd say 2.5 if not 3 stops better than my 60D.
Damn...
Canon EOS 6D, 60D, 50D.
Sigma 70-200 EX OS HSM, Sigma 70-200 Apo EX HSM, Samyang 14 2.8, Samyang 35 1.4, Samyang 85 1.4.
Proud supporter of Magic Lantern.