Author Topic: Canon 7D Mark I  (Read 766445 times)

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6972
Re: Canon 7D
« Reply #850 on: March 31, 2015, 10:24:30 PM »
Format card using a card reader. Format card in cam again. Copy extracted nightly contents to card. Run firmware update.
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

Argon

  • New to the forum
  • *
  • Posts: 9
Re: Canon 7D
« Reply #851 on: March 31, 2015, 10:32:33 PM »
Thank a lot...Now is working...
Pls, link me original WWW to recive ML for my 7D..

Thank U again...

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6972
Re: Canon 7D
« Reply #852 on: March 31, 2015, 10:44:24 PM »
First page, first post.
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

Argon

  • New to the forum
  • *
  • Posts: 9
Re: Canon 7D
« Reply #853 on: March 31, 2015, 10:45:07 PM »
ok.

Argon

  • New to the forum
  • *
  • Posts: 9
Re: Canon 7D
« Reply #854 on: March 31, 2015, 11:37:32 PM »
Work nice...but one question...

My main reason for using the ML is Dual ISO.
I'm only use photo, not a video.
How to process DUAL ISO images ?... conventional way is not going ...

otherwise, for processing I usually use Photoshop.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6972
Re: Canon 7D
« Reply #855 on: April 01, 2015, 12:19:37 AM »
-> Postprocessing forum
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

mssrihari1

  • New to the forum
  • *
  • Posts: 11
Re: Canon 7D
« Reply #856 on: April 01, 2015, 09:06:04 AM »
My canon 7d got bricked when i was trying to shoot 2k using magic zoom. Got this suggestion in the blue screen-

- Go to LiveView and enable DIGIC peaking.
- Take a photo of a calendar, focusing on today's date.
- Try pressing the magic button quickly enough.

Tried this, but the error is recurring. Tried restarting, reinstalling and everything else. But it keeps giving this message.

Please help.


a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12351
  • Emergencies only
Re: Canon 7D
« Reply #857 on: April 01, 2015, 09:36:58 AM »
- Take a photo of a calendar, focusing on today's date.

Probably the photo wasn't focused very well, can you upload it?

mssrihari1

  • New to the forum
  • *
  • Posts: 11
Re: Canon 7D
« Reply #858 on: April 01, 2015, 10:13:40 AM »
I got the error before I even was able to take the photo. :(

Thanks in advance for any help possible.

mssrihari1

  • New to the forum
  • *
  • Posts: 11
Re: Canon 7D
« Reply #859 on: April 01, 2015, 10:14:58 AM »
I got the error as soon as I enabled DIGIC peaking and I was about to zoom in and I see the blue screen immediately.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6972
Re: Canon 7D
« Reply #860 on: April 01, 2015, 10:21:24 AM »
You are sure you focussed on the correct date in your calendar?
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

mssrihari1

  • New to the forum
  • *
  • Posts: 11
Re: Canon 7D
« Reply #861 on: April 01, 2015, 10:37:53 AM »
Tried again and got the blue screen immediately after i got the photo. Trying to attach. Not happening.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6972
Re: Canon 7D
« Reply #862 on: April 01, 2015, 11:03:43 AM »
I'm not sure, but maybe I found a workaround:
Turn on movie mode in 1080p25, make sure to have audio recording enabled (manual mode). Focus on today's date in calendar, activate recording and repeat month's name at least 2 times. Avoid clipping! Replay on computer.
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

mssrihari1

  • New to the forum
  • *
  • Posts: 11
Re: Canon 7D
« Reply #863 on: April 01, 2015, 11:09:51 AM »
If this is an April Fool Day joke, then I'm relieved!!!! :D

But please do let me know how to fix this.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6972
Re: Canon 7D
« Reply #864 on: April 01, 2015, 11:15:19 AM »
Now you're focussed!
Change cam's date and your problem is gone.
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

mssrihari1

  • New to the forum
  • *
  • Posts: 11
Re: Canon 7D
« Reply #865 on: April 01, 2015, 11:17:14 AM »
Of all the days I could have tried this, I had to pick today!

Thanks so much for the heart attack!!! But what a way to open my account on this forum?!!! :D

pterpm

  • Just arrived
  • *
  • Posts: 1
Re: Canon 7D
« Reply #866 on: April 02, 2015, 03:45:12 AM »
Quote
My canon 7d got bricked when i was trying to shoot 2k using magic zoom. Got this suggestion in the blue screen-

- Go to LiveView and enable DIGIC peaking.
- Take a photo of a calendar, focusing on today's date.
- Try pressing the magic button quickly enough.

I got the same message, i did tried the ML before but never have this problem . Now , i have to use the camera without it.

Frank7D

  • Senior
  • ****
  • Posts: 455
Re: Canon 7D
« Reply #867 on: April 02, 2015, 05:55:08 AM »
Try again April 2.

beanz

  • New to the forum
  • *
  • Posts: 29
Re: Canon 7D
« Reply #868 on: April 02, 2015, 08:14:09 AM »

Thought I'd also jump in on this. Had a shoot the other day and this popped up whilst trying to review an image that was just taken. After a reboot the camera was fine and shooting back to normal. I did find it strange that after turning the camera off and removing the battery, the image was still displayed on my external monitor which I turned off also. Running the latest ML nightly.

windh

  • New to the forum
  • *
  • Posts: 20
Re: Canon 7D
« Reply #869 on: April 03, 2015, 08:46:38 AM »
Hi. I'm using an older nightly build (don't have the exact version at hand, ill get back on that).

There are a few hiccups when shooting raw. For example, no overlays work. If I activate any I get corrupted frames in the material etc.

Is this issue fixed in later  builds?

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6972
Re: Canon 7D
« Reply #870 on: April 03, 2015, 08:56:35 AM »
Without any further information it's impossible to answer.
If you're running at the edge of performance slips will occur, that's for sure.
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

N/A

  • Hero Member
  • *****
  • Posts: 576
  • Dreaming in 14 bit
Re: Canon 7D
« Reply #871 on: April 05, 2015, 10:40:54 PM »
1728x692 48 fps slow mo. But wait a minute... When I play it back, the footage is normal aspect, no stretching required! I'm kinda running on no sleep in 2 days, I need someone to confirm this ASAP. I noticed when I set the cam to 1280x720 60p, and set the fps override to 23.976 exact fps, the liveview display was stretched vertically, so when recording it and playing it back records it in normal aspect! Timer A under 23.976 exact is 422 (FT -76). So I set the fps to 48, and Timer A back to 422. Mlv settings-
1728x692
3:2
GD Off
Canon preview
256 MB warmup
SRM On
Hacks on
4 buffers
Reserve on
Global Draw off
Expo override on

Rokinon 35mm manual cine lens

After messing with it a little bit more, the black and white levels get all wacky sometimes and the exposure is super glitchy. At first, I noticed this while testing out different settings in 640x480 mode, going to do some more tests soon as I charge my battery.

:edit: Yeah definitely a bug in the fps override control. I just downloaded the latest nightly, same thing. How exactly does fps override cause LV to stretch? Or is this a new feature I completely missed?!

:edit2: Ok, just figured out that this bug has been in the nightly since 7d fps override was implemented.

:edit3: To fix this issue, Timer A needs to be set to 498 (FT +76) for 23.976 exact and 440 (FT +10) for 60 exact.
7D. 600D. Rokinon 35 cine. Sigma 30 1.4
Audio and video recording/production, Random Photography
Want to help with the latest development but don't know how to compile?

Spameris

  • Just arrived
  • *
  • Posts: 1
Re: Canon 7D
« Reply #872 on: April 06, 2015, 11:53:55 PM »
Is it possible to run ML without autoboot like it was working in version Alha 2?

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 6972
Re: Canon 7D
« Reply #873 on: April 06, 2015, 11:58:02 PM »
And the benefit?
Faster wakeup?

Another configuration to support and sparce dev time ...
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

Mare

  • New to the forum
  • *
  • Posts: 24
Re: Canon 7D
« Reply #874 on: April 08, 2015, 06:00:59 PM »
Hi Spameris

You can always update ML firmware in your camera and wait couple of seconds until the bootflag is removed.

Benefits??
I love ML because I often use exposure override (great to work with manual lenses) and other great thinks, ... but sometimes ML have little bugs, so I can use Canon firmware (for example must be some kind of bug in ML firmware with remote flash communication, ...).

You can always have best of both worlds.  :)