Author Topic: Canon 7D Mark I  (Read 1051501 times)

dpjpandone

  • Senior
  • ****
  • Posts: 316
Re: Magic Lantern for 7D 2.0.3
« Reply #300 on: May 30, 2014, 12:49:13 PM »
Thank You for explaining this to me. I had a feeling that if it was that simple it would have been done already.

bischofftep

  • New to the forum
  • *
  • Posts: 17
Re: Magic Lantern for 7D 2.0.3
« Reply #301 on: May 30, 2014, 09:36:58 PM »
I would like to make sure that when recording raw video the hdmi output is functional with the 7D?

My experimentation with that setup has been NO, it will NOT work RAW + HDMI output. There will be significant tearing of the recorded image. That said, I've been pretty aggressive with the frame sizes I'm working with, so it may be that it works at lower resolutions than what I'm trying to do. But at anything approaching 1080 it does NOT work with HDMI output. Unplug the monitor and you're fine. (Which for me, as I suspect it is for you, is a deal-breaker, sadly.)

I'm still trying to understand how to "bang on the code" to try and fix this, but alas it seems out of my skill range for now.
Douglas E. Bischoff
Audio/Video Production & Scoring

feureau

  • Hero Member
  • *****
  • Posts: 604
Re: Magic Lantern for 7D 2.0.3
« Reply #302 on: June 01, 2014, 04:40:17 AM »
Btw, the nightly build for the 7D 2.0.3 has failed for 3 consecutive builds, does anyone know what's up with that?

Audionut

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3657
  • Blunt and to the point

Pelican

  • Contributor
  • Senior
  • *****
  • Posts: 408
Re: Magic Lantern for 7D 2.0.3
« Reply #304 on: June 01, 2014, 01:20:36 PM »
I've added the missing stubs and made a PR.
Next time if something is missing please send an email or PM to me.
EOS 7D Mark II, EOS 7D, EOS 5, EOS 100 + lenses (10mm to 300mm), 600EX, 550EX, YN600EX x 3
EOScard, EOS DSLR firmwares, ARMu, NiControl, etc.: http://pel.hu/down

pemu

  • New to the forum
  • *
  • Posts: 2
Re: Magic Lantern for 7D 2.0.3
« Reply #305 on: June 03, 2014, 06:09:01 PM »
I've added the missing stubs and made a PR.
Next time if something is missing please send an email or PM to me.

Hallo iam sorry for my english, i am senior from czech republic ;-)  Please help me, where is stabil ML for 7D 2.0.3. download? I did not find, only nightly and not kompletly (dual iso...). Please send me on my email PEMU1@seznam.cz   Thank you!

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8494
Re: Magic Lantern for 7D 2.0.3
« Reply #306 on: June 03, 2014, 06:20:04 PM »
There is no stable, only nighties and Dual ISO module is included there. To find out what is covered or not, refer to
http://builds.magiclantern.fm/#/features

Ciao
Walter

BennisHahn

  • New to the forum
  • *
  • Posts: 3
Re: Magic Lantern for 7D 2.0.3
« Reply #307 on: June 03, 2014, 06:32:44 PM »
I'm currently trying to jump into ML and having a problem just getting the firmware onto my camera.

My camera allows me to select the option for loading a new firmware, the firmware update screen flashes for a moment and then I just get black. Top screen still works and responds to inputs but the rest of the camera is unresponsive. I have to remove the battery to get it back to normal - once I do the camera functions fine on the standard Canon firmware.

I have never had ML on this camera. I have spent the last couple days reading what I can here but the information is so scattered around I guess I must have missed something. Anyone have any advice? And once this is installed, will I be able to record raw or do I have to install some other module separately?

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8494
Re: Magic Lantern for 7D 2.0.3
« Reply #308 on: June 03, 2014, 06:39:43 PM »
You installed Canon's firmware 2.0.3: Link found in step 2?
If not: Redo

Format card in cardreader, insert into cam, format here again, reinsert into cardreader again, copy expanded nightly contents there (AUTOEXEC.BIN, ML directory, FIR-file) and reinsert into cam and run firmware update.
If it doesn't work, reset cam to factory defaults including Fn settings, switch to M, redo firmware update with ML's FIR file.

BennisHahn

  • New to the forum
  • *
  • Posts: 3
Re: Magic Lantern for 7D 2.0.3
« Reply #309 on: June 03, 2014, 07:49:51 PM »
You installed Canon's firmware 2.0.3: Link found in step 2?
If not: Redo

Format card in cardreader, insert into cam, format here again, reinsert into cardreader again, copy expanded nightly contents there (AUTOEXEC.BIN, ML directory, FIR-file) and reinsert into cam and run firmware update.
If it doesn't work, reset cam to factory defaults including Fn settings, switch to M, redo firmware update with ML's FIR file.

Thank you Walter. Once I formatted the CF card on my computer (and not a quick format) it worked just fine.

Rainmanwalking

  • New to the forum
  • *
  • Posts: 13
Re: Magic Lantern for 7D 2.0.3
« Reply #310 on: June 03, 2014, 08:30:13 PM »
Testing Mar 18 Nightly.

At 1728x 972 I notice the image would tear when there is HDMI monitor attached. With no HDMI attached the image is ok.

Link to a sample frame with tearing.
https://scontent-a-dfw.xx.fbcdn.net/hphotos-prn1/t31.0-8/1115948_454560808008042_1036050560_o.jpg

Have these issues been resolved?   

bischofftep

  • New to the forum
  • *
  • Posts: 17
Re: Magic Lantern for 7D 2.0.3
« Reply #311 on: June 03, 2014, 08:53:01 PM »

Have these issues been resolved?

No: in RAW still exists.
Douglas E. Bischoff
Audio/Video Production & Scoring

pemu

  • New to the forum
  • *
  • Posts: 2
Re: Magic Lantern for 7D 2.0.3
« Reply #312 on: June 03, 2014, 09:11:30 PM »
Thank you!

Installation:
1) Format the card from the camera.
2) Make sure you are running Canon firmware 2.0.3.
3) Copy ML files on the card and run Firmware Update.

Uninstallation:
1) Run Firmware Update from your ML card.
2) Follow the instructions.





Hallo iam sorry for my english, i am senior from czech republic ;-)  Please help me, where is stabil ML for 7D 2.0.3. download??? I did not find, only nightly and it is not kompletly (dual iso...).   Thank you! pemu


I tried re-installing and the same: dual iso - will load (?)

ted ramasola

  • Moderators
  • Hero Member
  • *****
  • Posts: 1251
Re: Magic Lantern for 7D 2.0.3
« Reply #313 on: June 03, 2014, 09:19:08 PM »
There is no stable, only nighties and Dual ISO module is included there. To find out what is covered or not, refer to
http://builds.magiclantern.fm/#/features

Ciao
Walter
5DmkII  / 7D
www.ramasolaproductions.com
Texas

Rainmanwalking

  • New to the forum
  • *
  • Posts: 13
Re: Magic Lantern for 7D 2.0.3
« Reply #314 on: June 04, 2014, 02:45:42 AM »
Ted,  On your website you say that it's possible to record at 3X Crop mode
up to 2048 x 930 at 23.976fps.  Your video "Textures of Winter" which is superb was recorded in that format as well.    I don't have that option, I can only record at 29.99 fps.  I'm using the June 1 nightly on my new Lexar 32gb 1066x card.  What am I missing?   

ted ramasola

  • Moderators
  • Hero Member
  • *****
  • Posts: 1251
Re: Magic Lantern for 7D 2.0.3
« Reply #315 on: June 04, 2014, 02:55:01 AM »
Rainmanwalking,

It was done using features only found in TL which is not yet ported back into ML nightlies.

vyskocil, already submitted a pull request as stated here;
http://www.magiclantern.fm/forum/index.php?topic=9848.msg116516#msg116516

hopefully it will be reviewed and ported into ML soon.
5DmkII  / 7D
www.ramasolaproductions.com
Texas

Rainmanwalking

  • New to the forum
  • *
  • Posts: 13
Re: Magic Lantern for 7D 2.0.3
« Reply #316 on: June 04, 2014, 03:21:38 AM »
I see..... I can shoot at 1920x872 30fps continuous and it looks great.  Would just rather save the frames and shoot at 24fps.  I'll try to get some video posted soon.  I'm converting using raw2dng opening in  Lightroom Making adjustment as needed and than exporting to tiff's and pulling into Vegas.  I'm than using Magic Lantern to color grade.    Any suggestions?   

onlypapai

  • New to the forum
  • *
  • Posts: 10
Re: Magic Lantern for 7D 2.0.3
« Reply #317 on: June 04, 2014, 05:44:40 PM »
Hi, I am new to the forum. I am a 600D user. I want to upgrade to 7D only for ML RAW. Since 5D Mark iii is too expensive I have the only choice of 7D. Can anyone say at what maximum resolution 7D can shoot continuous RAW with a LEXAR 1000X CF?

arrinkiiii

  • Hero Member
  • *****
  • Posts: 1104
  • ML ADDICTED 7D & 5D III
Re: Magic Lantern for 7D 2.0.3
« Reply #318 on: June 04, 2014, 07:51:41 PM »

Yes, would be nice if someone have the time to review the pull request.  Hope soon we can have FPS override  in the 7D =))

Rainmanwalking

  • New to the forum
  • *
  • Posts: 13
Re: Magic Lantern for 7D 2.0.3
« Reply #319 on: June 04, 2014, 09:43:14 PM »
Hi, I am new to the forum. I am a 600D user. I want to upgrade to 7D only for ML RAW. Since 5D Mark iii is too expensive I have the only choice of 7D. Can anyone say at what maximum resolution 7D can shoot continuous RAW with a LEXAR 1000X CF?

I would start at 1920x872 in crop mode.  In standard mode I was shooting at 1600x900 with similar card with no problems.  You might get a step better than that.   

blackjack102

  • New to the forum
  • *
  • Posts: 26
Re: Magic Lantern for 7D 2.0.3
« Reply #320 on: June 05, 2014, 04:34:11 AM »
Hi, I am new to the forum. I am a 600D user. I want to upgrade to 7D only for ML RAW. Since 5D Mark iii is too expensive I have the only choice of 7D. Can anyone say at what maximum resolution 7D can shoot continuous RAW with a LEXAR 1000X CF?

Maybe you would want to wait for 7D mark II. Many developers don't like to work on 7D.

Braga

  • New to the forum
  • *
  • Posts: 20
Re: Magic Lantern for 7D 2.0.3
« Reply #321 on: June 05, 2014, 08:15:52 AM »
Making Magic 550D
EFP/ENG Photog/Editor

onlypapai

  • New to the forum
  • *
  • Posts: 10
Re: Magic Lantern for 7D 2.0.3
« Reply #322 on: June 05, 2014, 10:55:39 AM »
Thank you all for your replies.

handbanana

  • Freshman
  • **
  • Posts: 88
Re: Magic Lantern for 7D 2.0.3
« Reply #323 on: June 06, 2014, 08:18:58 PM »
The 50D does close to 1600 x 900 and it upscales really well. The 7D does a bit higher resolution but it doesn't seem as stable, although I've been debating getting one if the resolution makes any noticeable difference in quality.

vyskocil

  • Freshman
  • **
  • Posts: 53
Re: Magic Lantern for 7D 2.0.3
« Reply #324 on: June 06, 2014, 09:30:28 PM »
The 7D has "5x" (about 3x) crop mode which is essentially free of aliasing artifacts and can reach fullHD resolution and above (not necessarily continuously...), I don't know if 50D also has this feature ?