Author Topic: Canon EOS M  (Read 1124875 times)

canoneer

  • New to the forum
  • *
  • Posts: 37
Re: Canon EOS M
« Reply #4600 on: October 18, 2020, 01:55:29 PM »
Re Remote triggering the EOS M. I have way back in time managed to get the Triggertrap Audio remote function to work. Now I can see the volume peek when triggering on the iPhone but it seems impossible to get a reaction. Do I need to do more than activating the function in the ML menu? If you have time to throw a lifeline?

Hope you are all well and enjoy more tech fun during local close down periods.

I have a little EosM rig where I would benefit a lot from using a remote trigger.  So any help to get it running would be great.

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6968
Re: Canon EOS M
« Reply #4601 on: October 18, 2020, 02:09:54 PM »
Please don't repost. Try search and find relevant topics, builds or people working around these matters. If you come up empty. Try and fix it yourself.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7616
Re: Canon EOS M
« Reply #4602 on: October 18, 2020, 02:11:18 PM »
Do you see the line "Audio release ON (xx/20)" on your display?
Finger snipping doesn't work well. Speak to the machine! ;-)

canoneer

  • New to the forum
  • *
  • Posts: 37
Re: Canon EOS M
« Reply #4603 on: October 18, 2020, 09:34:35 PM »
Yes, I see the «Audio release on» message on my display.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7616
Re: Canon EOS M
« Reply #4604 on: October 18, 2020, 09:48:17 PM »
And? Are the numbers "xx" moving? Have you tried shouting at the cam (no joke!). Which build are you using? Have you tried other builds like plain nightly build and older versions of this?
You can switch between different builds fast by renaming autoexec.bin and ML directory and copying other extracted builds to card.
@other EOS M users: Is Audio Remote Shot working for you?

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1723
Re: Canon EOS M
« Reply #4605 on: October 18, 2020, 10:01:24 PM »
@other EOS M users: Is Audio Remote Shot working for you?
Yapp, works.
5D3.113 | EOSM.202

canoneer

  • New to the forum
  • *
  • Posts: 37
Re: Canon EOS M
« Reply #4606 on: October 18, 2020, 10:35:28 PM »
I have one M with nightly 11 august - triggertrap-tested with xx volume meter showing 8, 10, 20, 35 with no trigger response - microphone test same. Different M nightly 19 september - tested same way - no response.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7616
Re: Canon EOS M
« Reply #4607 on: October 18, 2020, 10:39:23 PM »
Forget Triggertrap for a moment. Have you tried voice and shouting at it? In photo mode with AF deactivated ...

canoneer

  • New to the forum
  • *
  • Posts: 37
Re: Canon EOS M
« Reply #4608 on: October 18, 2020, 10:55:44 PM »
Tried without troggertrap, with and without external microphone. No xx response in photo or video. It do detect external micrphone - I had to try that as well since I could not make sound load enough with camera mike.

canoneer

  • New to the forum
  • *
  • Posts: 37
Re: Canon EOS M
« Reply #4609 on: October 18, 2020, 10:59:41 PM »
I restarted, reconnected mike and I then managed to trigger in photo mode, but not in video.

sm105

  • New to the forum
  • *
  • Posts: 28
Re: Canon EOS M
« Reply #4610 on: October 19, 2020, 02:24:22 AM »
Could you post a sample from that file? I filmed the moon and I think if exposed correctly it will also work. It did in my case.

Sent in a pm

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6968
Re: Canon EOS M
« Reply #4611 on: October 19, 2020, 07:33:19 AM »
Sample mlv.
You can post openly, don´t see why not. Your flicker could be the fact it´s a timelapse at around 1fps. Look into deflicker applications. Or it´s cr2hdr treating files individually. It´s the moon surrounded with black. A sample mlv could be interesting to test.

SponaxSpinax

  • New to the forum
  • *
  • Posts: 2
Re: Canon EOS M
« Reply #4612 on: October 19, 2020, 01:16:18 PM »
Hi everyone. I'm sorry if this is the wrong thread or if my question has been answered before, but I coulnd't find an explanation. I installled ML a few days ago and I have been trying and it has been wonderful, but for some reason I can't change my ISO through magic lantern when I'm in movie mode. I have enabled the manual mode and if I try to change the ISO through canon native menu I cand changem, but through the magic lantern it always goes back to 100 (or whatever ISO i have set in the canon menu.

canoneer

  • New to the forum
  • *
  • Posts: 37
Re: Canon EOS M
« Reply #4613 on: October 22, 2020, 11:46:05 AM »
re  #4600

After numerous approaches I managed to get my long forgotten RC-6 to function for both video (channel#2) and photo. Thanks for your effort Walter Schulz!

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6968
Re: Canon EOS M
« Reply #4614 on: October 23, 2020, 08:05:35 AM »
New build:
https://www.magiclantern.fm/forum/index.php?topic=9741.msg208959#msg208959

- Enabled Kill Canon GUI

When enabled it will exclude arrows from preview window but keep ml graphics. Lucky find in code this morning. Means you´ll get a perfectly clean preview while using theBilalFakhouri´s realtime preview presets. The function is auto set if going through tap display menu.





benoit

  • New to the forum
  • *
  • Posts: 30
Re: Canon EOS M
« Reply #4615 on: October 23, 2020, 10:37:58 AM »
WHAOU !! Danne thanks a lot, just what I'm talking about in post #4417 !
One month later, you do it !
Congratulations !
David   :D

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6968
Re: Canon EOS M
« Reply #4616 on: October 23, 2020, 11:00:05 AM »
Yes. Still possible to dig out treasures from A1ex code. Uploaded a new build addressing some pink frame issue and a few more fixes.

ZEEK

  • Senior
  • ****
  • Posts: 300
Re: Canon EOS M
« Reply #4617 on: October 23, 2020, 11:03:06 AM »
Congrats! Just tested it, works like a charm. Much more pro-looking now 😎🔥🔥 Cheers 👌
EOS M - EOS M2 - 5D2

benoit

  • New to the forum
  • *
  • Posts: 30
Re: Canon EOS M
« Reply #4618 on: October 23, 2020, 01:49:59 PM »
Yes, one thing for more pro-looking would be to fix the focal equivalent indicator with take in account the speed booster coefficient (1; 0.71; 0.64) and the ratio (sensor resolution / raw recording resulution).
The full real time preview is a revolution on EOSM !
Thanks again.
David

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1723
Re: Canon EOS M
« Reply #4619 on: October 23, 2020, 02:06:01 PM »
Yes, one thing for more pro-looking would be to fix the focal equivalent indicator with take in account the speed booster coefficient (1; 0.71; 0.64)
This is already working. The Viltrox speedbooster converts the lens metadata, so e.g. a 16mm lens @f/2.8 is shown as 11mm f/2.0 on the EOSM screen.
5D3.113 | EOSM.202

ctfire

  • New to the forum
  • *
  • Posts: 48
Re: Canon EOS M
« Reply #4620 on: October 23, 2020, 05:45:25 PM »
can't download the last build , the link is broken (

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7616

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6968
Re: Canon EOS M
« Reply #4622 on: October 23, 2020, 06:07:56 PM »
Ah, yes updated the link again. Download should work again.
https://www.magiclantern.fm/forum/index.php?topic=9741.msg208959#msg208959

benoit

  • New to the forum
  • *
  • Posts: 30
Re: Canon EOS M
« Reply #4623 on: October 24, 2020, 09:29:22 AM »
@masc yes you 're right about lens conversion. I missed that.
I think it will be better to display to focal equivalent with multiplying with the ratio sensor/raw capture.
Now with my 24mm EF lens on viltrox it displays 17mm eq instead for 2.5K mode : 24x0.71x5184/2500 = 35mm !
Perhaps I missed something again, tell me.
Thanks
David

ctfire

  • New to the forum
  • *
  • Posts: 48
Re: Canon EOS M
« Reply #4624 on: October 24, 2020, 12:03:42 PM »
Ah, yes updated the link again. Download should work again.
https://www.magiclantern.fm/forum/index.php?topic=9741.msg208959#msg208959
Now it works , thank you, try to test it today