Author Topic: Canon EOS M  (Read 1123285 times)

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6967
Re: Canon EOS M
« Reply #3750 on: November 23, 2019, 10:53:23 PM »
In Your build ISO climb doesnt work in 2.5k mode, 45/50/48fps mode crop and noncrop, works fine in other modes  .
Did you turn off iso average setting? Will set you in iso 100. Iso climb work with all presets over here.
Resolutions have been outlined one by one mainly to deliver continuos recording. However, feel free to refine and customize. Doubt I will have much time to throw into my build any time soon but I keep looking ;).

berechiah

  • Freshman
  • **
  • Posts: 84
Re: Canon EOS M
« Reply #3751 on: November 24, 2019, 03:43:46 AM »
Hey guys any one know how to get rid of 3 or 4 red pixels in my raw video

I have a different eos m
And it has some bad pixels
I did the bad pixel fix in mlvfs
But is there an easier way

DeafEyeJedi

  • Hero Member
  • *****
  • Posts: 3397
  • 5D3 | M1 | 7D | 70D | SL1 | M2 | 50D
Re: Canon EOS M
« Reply #3752 on: November 24, 2019, 05:22:16 AM »
Bad pixel fix in MLV_App does wonders, actually!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

bakersdozen

  • Freshman
  • **
  • Posts: 88
Re: Canon EOS M
« Reply #3753 on: November 24, 2019, 11:09:54 AM »
Bad pixel fix in MLV_App does wonders, actually!
Seconded, almost too easy
EOS M + 5D3

berechiah

  • Freshman
  • **
  • Posts: 84
Re: Canon EOS M
« Reply #3754 on: November 24, 2019, 12:48:56 PM »
Thanks true

Look guys thanks a mill
I sold my eos m about 6 months back
And I had a 70d then a 6d then a 5d 3 and last of all a 5d4

An I am back at the most trusted camera I ever owned
Eosm

I have a 24 to 70 f4 and I am loving it

Thanks again

2blackbar

  • Senior
  • ****
  • Posts: 431
Re: Canon EOS M
« Reply #3755 on: November 24, 2019, 10:28:42 PM »
I found this works great for cctv lens and mcm rewire crop without any vignetting from sides
Code: [Select]
                 
                             case CROP_PRESET_mcm_mv1080_EOSM:
                cmos_new[5] = 0x20;
                cmos_new[7] = 0x800;
                if (x3crop == 0x1 || crop_patch)
                {
                    cmos_new[5] = 0x380;
                    cmos_new[7] = 0xaaa;
                }
                if (ratios == 0x0 && (x3crop == 0x1 || crop_patch))
                {
                    cmos_new[5] = 0x380;
                    cmos_new[7] = 0xaaa;
                }
                break;
               

I also have this that works fine for 16:9 1920x1080p resolution(dialed down from 2520x1418) in 2.5k mode 
But... I would like to also center image in 2520x1418 but i only see this for 2.5k mode and cmos settings that i centered while being in dialed down 1920x1080 resolution, its still not centered in 2520x1418:
Code: [Select]
            case CROP_PRESET_2K_EOSM:
      cmos_new[5] = 0x2c0;             /* vertical (first|last) */
              cmos_new[7] = 0x6a9;    /* pink highlights without this */
                break;
               
What should i add if i want to have different centering after i dial down resolution to 16:9 -1920x1080 and different when i use 16:9 2520x1418 ?
I also noticed that after recording mlv it goes back to liveview after slight pause and then framing is wrong , i have to enter playback mode, then press exit in corner, when it comes back to liveview then framing is correct, so after recording there is something thats changing CMOS value again messing up framing.
I also discovered that in 2.5k mode you can actually press small triangle arrows to move your framing around like during zoom, but i tried to get it centered when white zoom box is at the center.

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6967
Re: Canon EOS M
« Reply #3756 on: November 25, 2019, 12:09:29 AM »
Thanks. Hope to get a look at this soon.

Luther

  • Senior
  • ****
  • Posts: 317
Re: Canon EOS M
« Reply #3757 on: November 25, 2019, 09:50:35 PM »
Output is dng deflate.
So what? This is a pro not a "con". Preserving it in raw format gives you much more flexibility.
Quote
Hdr movie sequences will not work here for instance.
Neither ffmpeg tmix.
Quote
Numerous occasions where hdrmerge will output badly merged files. Occasionally big issues in lows(crushing blacks), before highlights were messy too but seems fixed.
I use it for years. Never once this happened.
Quote
Bulk work not reliable.
This point I agree.
Quote
Clear winner as always, enfuse. By far.
I'll test it.
Quote
I think your last words in your post pretty much sums it up pretty perfectly ;).
Maybe. But criticism is necessary sometimes.

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6967
Re: Canon EOS M
« Reply #3758 on: November 26, 2019, 12:45:02 AM »
I prefer coders and deeper know how around modifying/refining actual functions menus etc since my own knowledge is very limited in those areas. Unfortunately they don't grow on trees lately, if ever. Jip-Hop took a short but very useful dive but quickly ran out of time and I have very little time atm myself.
Regarding HDRmerge my points are valid to me and in this case, for the averaging workflow in Mlv app, not at all relevant. If you want to use hdrmerge please do. I won't, for now at least.

Disease

  • New to the forum
  • *
  • Posts: 39
Re: Canon EOS M
« Reply #3759 on: November 26, 2019, 10:46:46 AM »
ML is a bit of fun but it is so unreliable. It constantly deactivated the shutter release so I unable to start recording or taking a photograph without restarting sometimes multiple times.

I have many other questions but I don't know if it's worth noting them all here. I would like to know how to record higher resolutions with some stability, or record more FPS than 30. Having the ability to record 50fps at 1080 would be incredible and seems realistic as people are recording 2.5K at 48fps.

The crop/zoom mode that removes the aliasing and moire always deactivates when I restart the camera and I have to go into the menu and reactivate it. Again makes it kinda useless for anything serious.

One more, can I manually control the audio levels without entering into the menu? maybe set up the dial to control the gain?

Many thanks for any help! :-)

2blackbar

  • Senior
  • ****
  • Posts: 431
Re: Canon EOS M
« Reply #3760 on: November 26, 2019, 04:44:15 PM »
Sourcecode is out there, its very possible to fix a lot of stuff , everyone can give it a try and Danne is very supportive.

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1722
Re: Canon EOS M
« Reply #3761 on: November 26, 2019, 06:20:20 PM »
ML is a bit of fun but it is so unreliable. It constantly deactivated the shutter release so I unable to start recording or taking a photograph without restarting sometimes multiple times.

I have many other questions but I don't know if it's worth noting them all here. I would like to know how to record higher resolutions with some stability, or record more FPS than 30. Having the ability to record 50fps at 1080 would be incredible and seems realistic as people are recording 2.5K at 48fps.

The crop/zoom mode that removes the aliasing and moire always deactivates when I restart the camera and I have to go into the menu and reactivate it. Again makes it kinda useless for anything serious.

Here it is very reliable. I can record in 5K anamorphic mode all over the day without one single corrupted frame, without one single crash. Same for 45fps at a little less than 1080p. 2.5K at 48fps is not possible with EOS M (and will never be): card interface is way too slow - that is simple math.

What's the problem with shutter release? Absolutely don't know what you mean. I can take pictures at any time in picture mode and can record video at any time in video mode - without changing anything in settings.

For zoom mode in 1080p you have to press exactly one button after start.

Don't write ML is useless and unreliable if you don't know what you do, or if you don't know if you're doing it right.
5D3.113 | EOSM.202

Stousen

  • New to the forum
  • *
  • Posts: 43
Re: Canon EOS M
« Reply #3762 on: November 26, 2019, 06:46:12 PM »
Here it is very reliable. I can record in 5K anamorphic mode all over the day without one single corrupted frame, without one single crash. Same for 45fps at a little less than 1080p. 2.5K at 48fps is not possible with EOS M (and will never be): card interface is way too slow - that is simple math.

What's the problem with shutter release? Absolutely don't know what you mean. I can take pictures at any time in picture mode and can record video at any time in video mode - without changing anything in settings.

For zoom mode in 1080p you have to press exactly one button after start.

Don't write ML is useless and unreliable if you don't know what you do, or if you don't know if you're doing it right.

+1

srsa

  • Contributor
  • New to the forum
  • *****
  • Posts: 44
Re: Canon EOS M
« Reply #3763 on: November 26, 2019, 08:25:54 PM »
It constantly deactivated the shutter release so I unable to start recording or taking a photograph without restarting sometimes multiple times.
That's probably the "shutter bug". You can read about it here and also search in the print view of the current thread.

Anaconda_

  • New to the forum
  • *
  • Posts: 21
Re: Canon EOS M
« Reply #3764 on: November 27, 2019, 07:49:40 AM »
I can record in 5K anamorphic mode all over the day without one single corrupted frame, without one single crash.

How? I've been trying for the last few days and often get half a pink frame throughout my recordings. I've tried the preset options and run the script thinking it'll set everything up for me.

Also, do you typically shoot in framing or real-time (or mix between both with the INFO button)?

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 6967
Re: Canon EOS M
« Reply #3765 on: November 27, 2019, 08:03:57 AM »
Enough to install a fresh version, tap display, select 5k anamorphic rewired, start to record.
You need a good sd card, external monitor is a nono, and 24fps recommended. You do not mention your set up so hard to tell what parameter might be wrong at your end.
INFO button is not at all needed imo. Leave preview setup it as is(framing). While recording push halfshutter to get into realtime liveview, release button to get back into framing again.

2blackbar

  • Senior
  • ****
  • Posts: 431
Re: Canon EOS M
« Reply #3766 on: November 27, 2019, 10:48:35 PM »
Anamorphic 4k 5k isless demanding than 2.5k, did anyone recorded 1 minute of 2.5k in 2520x1416? What card if Yes.

LittleBig M

  • New to the forum
  • *
  • Posts: 31
Re: Canon EOS M
« Reply #3767 on: November 27, 2019, 11:58:51 PM »
Anamorphic 4k 5k isless demanding than 2.5k, did anyone recorded 1 minute of 2.5k in 2520x1416? What card if Yes.
2blackbar
I try multiple cards  all sandisc extreme pro  64g and 128g  on 2.5k in 2520x1416 all just seconds
2192x1234 1min 10sec 1710frames

keel

  • New to the forum
  • *
  • Posts: 46
Re: Canon EOS M
« Reply #3768 on: November 28, 2019, 04:46:14 AM »
Anyone experience footage that is too dark, pitch black pretty much, when imported into mlvproducer?

I filmed some stuff to test mcmrewire, and the anamorphic settings,
imported the footage and it was black.
Confused, I decided to boost the exposure and gamma to max.
Saw my footage.

Felt like, I read about this a while back


mix_vfx

  • New to the forum
  • *
  • Posts: 20
Re: Canon EOS M
« Reply #3769 on: November 28, 2019, 07:39:34 AM »
Anyone experience footage is way too dark, pitch black pretty much, when imported into mlvproducer?

Try using MLVApp, available for Windows and MacOS as well, and very well supported, plus latest just came out. Never tried MLVProducer, but last update is from 5/2019.

lightspeed

  • New to the forum
  • *
  • Posts: 38
Re: Canon EOS M
« Reply #3770 on: November 29, 2019, 12:38:06 PM »
Can someone confirm the crop in 2.5k

is it 2.9 x 1.6? or just a 2.9 crop.

I have a 12.5 mm but it looks wider then a 58 to me.

LittleBig M

  • New to the forum
  • *
  • Posts: 31
Re: Canon EOS M
« Reply #3771 on: November 29, 2019, 08:35:46 PM »
Can someone confirm the crop in 2.5k

is it 2.9 x 1.6? or just a 2.9 crop.

I have a 12.5 mm but it looks wider then a 58 to me.
Hi lightspeed
My video comparing 12mm on 2,5k mode(2520x1416 and 2256x1270) and 50mm on 1080 mode, both lenses with and without focal reducer.

 

lightspeed

  • New to the forum
  • *
  • Posts: 38
Re: Canon EOS M
« Reply #3772 on: November 29, 2019, 10:49:42 PM »
So it’s wider then the 50 mm. So you don’t add the 1.6 in crop mode?

Panz

  • New to the forum
  • *
  • Posts: 11
Re: Canon EOS M
« Reply #3773 on: November 30, 2019, 11:28:30 AM »
With the latest versions of danne's ml for eos-m, I can't find how to switch off modules.
 
I have 2 sandisk cards and 1 sony. The sony doesn't work with sd hack, it's speed is cut down by half(40mb/s to 20mb/s).
40mb is okay for 1080p rewired though.

Did i miss something? Is the toggle removed and is it easy to add it back again?

berechiah

  • Freshman
  • **
  • Posts: 84
Re: Canon EOS M
« Reply #3774 on: November 30, 2019, 09:56:56 PM »
Hey guys need a little help

I am using my eos m and I cant figure out
How do I change the bit rate to 12bit lossless and 10bit lossless

I dont seem to be able to find it anymore