Author Topic: Canon EOS M  (Read 807928 times)

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 5698
Re: Canon EOS M
« Reply #3400 on: September 07, 2019, 07:49:56 PM »
If you select mcm rewired and turn ratios off it should get you there by pushing SET button.
The same can be done with h264 when selected from tap display menu.

2blackbar

  • Member
  • ***
  • Posts: 193
Re: Canon EOS M
« Reply #3401 on: September 07, 2019, 08:31:51 PM »
I see it,  got it mixed up and it was the other way around, bigger crop was closer to 1080p and other one was from 2.5k.
Still it would be interesting to switch between different cop modes with set but maybe not by default cause it has to go 10bit 2.5
Sorry for confusion.

ngemu

  • New to the forum
  • *
  • Posts: 23
Re: Canon EOS M
« Reply #3402 on: September 08, 2019, 09:19:30 AM »
I cant figure out why I'm getting pink frames still. I've uploaded pictures of all my settings, is something conflicting with one another?

https://photos.app.goo.gl/D62t9DypA9rGfdiEA

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 5698
Re: Canon EOS M
« Reply #3403 on: September 08, 2019, 09:33:26 AM »
New build:
https://www.magiclantern.fm/forum/index.php?topic=9741.msg208959#msg208959

- sticky push set to default when installing. Seems more stable than the default focus aid default option.

@ngemu
I would suggest to skip 5k anamorphic and record with 4k anamorphic rewired instead. They will achieve practically the same but (hopefully) corruption free. I really should rename 4k to 5k anamorphic rewired but low priority atm.
I never use the global draw options so if you still are getting pink frames try turning those options to off as well, but first try with them on as I want to see if 4k anamorphic still holds up with them on. Please report back.

ngemu

  • New to the forum
  • *
  • Posts: 23
Re: Canon EOS M
« Reply #3404 on: September 08, 2019, 10:40:13 AM »
 :) will do!

New build:
https://www.magiclantern.fm/forum/index.php?topic=9741.msg208959#msg208959

- sticky push set to default when installing. Seems more stable than the default focus aid default option.

@ngemu
I would suggest to skip 5k anamorphic and record with 4k anamorphic rewired instead. They will achieve practically the same but (hopefully) corruption free. I really should rename 4k to 5k anamorphic rewired but low priority atm.
I never use the global draw options so if you still are getting pink frames try turning those options to off as well, but first try with them on as I want to see if 4k anamorphic still holds up with them on. Please report back.

mix_vfx

  • New to the forum
  • *
  • Posts: 11
Re: Canon EOS M
« Reply #3405 on: September 08, 2019, 01:03:39 PM »
Hi!

Just tested Sept 8th build briefly. All presets record corruption free out of the box. I even got 256 frames of 4K Ana in 14bit before it stopped. 10bit is Continuous.
5K Ana is also corruption free, but you are right to suggest using 4K Ana preset.

Sticky zoom works well, just one needs to press it long enough to stick : ) 200ms?

playback mostly works, but sometimes it stays on a black screen, while playing in the background, like mentioned earlier. Upon exiting playback with half shutter press, sometimes I get 1/3 preview, with bottom 2/3 of the LV remaining white. Texts on the bottom are rendered. Half Shutter press resolves it.

Thank you for your hard work once again.

ricardopt

  • Freshman
  • **
  • Posts: 82
Re: Canon EOS M
« Reply #3406 on: September 08, 2019, 02:03:42 PM »
...Just tested Sept 8th build briefly. All presets record corruption free out of the box...Upon exiting playback with half shutter press, sometimes I get 1/3 preview, with bottom 2/3 of the LV remaining white.... Half Shutter press resolves it.

Altough not a big issue, the same happens here, i find myself pressing several times halfshutter to get it right, i noticed that sometimes the preview gets static/frozen when i press record button but switching to photo mode and back to video fixes it.

Thanks for all the work you guys do.

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 5698
Re: Canon EOS M
« Reply #3407 on: September 08, 2019, 07:04:12 PM »
Thanks for feedback. Halfshutter routines has changed but I need to think through some other ways here later on.

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 5698
Re: Canon EOS M
« Reply #3408 on: September 08, 2019, 07:34:16 PM »
I put back a delay to the halfshutter push button. Might help some at least when leaving mlv_play...
New build up.

Anaconda_

  • New to the forum
  • *
  • Posts: 7
Re: Canon EOS M
« Reply #3409 on: September 09, 2019, 09:58:51 AM »
I recently updated the build and seem to have lost the ability to turn off any overlays when switching to stills mode. Can someone point me in the right direction?

Essentially, I want to turn off the Cropmarks when taking photos.

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 5698
Re: Canon EOS M
« Reply #3410 on: September 09, 2019, 10:14:57 AM »
Turn off global draw?

Anaconda_

  • New to the forum
  • *
  • Posts: 7
Re: Canon EOS M
« Reply #3411 on: September 09, 2019, 10:28:52 AM »
Sure, but previously, switching to photo mode did that automatically, and back to video would put the cropmarks etc. back. There was a setting to make this happen, but now I can't find it.

EDIT: found it. in the Cropmarks submenu 'Show in photo mode: On/Off

rinski

  • New to the forum
  • *
  • Posts: 30
Re: Canon EOS M
« Reply #3412 on: September 12, 2019, 07:11:42 PM »
Buenas tardes, quisiera saber si el 5k anamorfico es continuo con 10 bits para la sd sandisk 95 mbs extreme pro, no he conseguido mas de 2 segundos de grabaciĆ³n con 1664x2225, con mas de 52 mbs de velocidad se para y con mucho errores.
Gracias.

rinski

  • New to the forum
  • *
  • Posts: 30
Re: Canon EOS M
« Reply #3413 on: September 12, 2019, 07:12:09 PM »
Good afternoon, I would like to know if the anamorphic 5k is continuous with 10 bits for the sd sandisk 95 mbs extreme pro, I did not get more than 2 seconds of recording with 1664x2225, with more than 52 mbs of speed stops and a lot of errors.
Thank you.

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1271
Re: Canon EOS M
« Reply #3414 on: September 12, 2019, 08:35:24 PM »
No it isn't. I use it at 2.35:1, because then it gets continuous (at 1464x1870 (4K anamorphic rewire)).
5D2.212 | EOSM.202

ngemu

  • New to the forum
  • *
  • Posts: 23
Re: Canon EOS M
« Reply #3415 on: September 13, 2019, 04:35:37 AM »
While shooting in 4k mode, I like to use auto focus to set everything up.

However, sometimes it gets stuck in the preview (?) screen. I have to get into the ml menu or restart the camera to reset it. Anyone else experience this?

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 5698
Re: Canon EOS M
« Reply #3416 on: September 13, 2019, 04:52:02 AM »
Turn off focus aid. Otherwise aurofocus is nogo. You could maybe switch to photo mode, do af, then go back to movie mode. Might work with focus aid stil on.

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 5698
Re: Canon EOS M
« Reply #3417 on: September 13, 2019, 09:44:01 AM »
New build:
https://www.magiclantern.fm/forum/index.php?topic=9741.msg208959#msg208959

- added x3 crop modes into tap display list
- full sensor readout anamorphic mode in 14fps continuous. 12fps if set to 14 or 12bit.
Make sure to set ratios to OFF to get this activated. Works with the anamorphic modes.
Also note that if you set shutter range to Full range you can go down to 1/14s shutter...

MLV file:
https://bitbucket.org/Dannephoto/magic-lantern/downloads/full_readout.MLV

1736x2996(10bit 14fps continuous) Equals 5208x2996

AF-OFF

  • Freshman
  • **
  • Posts: 85
  • 50Dc EOSM
Re: Canon EOS M
« Reply #3418 on: September 13, 2019, 06:48:28 PM »
Hi Danne , hi guys
the latest Sept13 build doesn't record audio in 4k, 5k and 2.5k presets
EDIT - strange, now sound working again

very nice new 5k ana 14/12 FPS mode !

did some testing and have had pink frames only at two occasiones - 1-changing presets from 4k ana to 2.5k, started recording with the auto-set 2000x14?? res.  & 2. when pushing the 40+ FPS mode too hard, there were some one or two bad pics at the end

2.5k centered preset works great with 2520x1080, even with focus peaking in realtime preview
Other resolutions I found well working are 1920, 2048, 2160 & 2320x1080

2.5k cent, 4k 5k and mv1080p all working with GD overlays


FRSP together with intervalometer in photomode switches the display and all buttons off
when recording a limited frames, one can activate the LV by pressing the HShutter
Otherwise need to power of the cam in order to stop recording

best

EDIT - forgot to mention the crash while used the latest build for the first time , error 70
restarted the cam and everything back to normal. a log was generated


 
 

yokashin

  • New to the forum
  • *
  • Posts: 21
Re: Canon EOS M
« Reply #3419 on: September 13, 2019, 09:37:38 PM »
Would there be a chance to create a timelapse setting for 1 fps or 2 fps?

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 5698
Re: Canon EOS M
« Reply #3420 on: September 13, 2019, 09:44:37 PM »
Actually there are. You can reach them by doing this. While in x10 zoom mode (sticky push mode) push SET button until you reach the 1fps modes.

ZEEK

  • Member
  • ***
  • Posts: 106
Re: Canon EOS M
« Reply #3421 on: Today at 09:33:48 AM »
Hey Danne, really enjoying the 5K Rewired mode.
As I was using it, I was just wondering if a button (e.g. trashcan) could be amended to allow the alternation between preview modes e.g. Framing & Real-Time and allow these two framing modes to be "sustained" rather than just "half-pressed" for actual framing. Thanks! 8)
EOS M - EOS M2

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 5698
Re: Canon EOS M
« Reply #3422 on: Today at 09:45:22 AM »
Sustained as not affected by halfshutter press when selected? Realtime stays realtime when halfshutter pressed and framing stays framing even when hs pressed?

ZEEK

  • Member
  • ***
  • Posts: 106
Re: Canon EOS M
« Reply #3423 on: Today at 10:04:37 AM »
When you "half-press" shutter, it shows you "framing" as long as you hold down the shutter half-way.
I mean I want "Realtime" liveview to change to "Framing" with a click of a button and stay like that, instead of going all the way into the menu to change from realtime preview into framing and then back again, if that's possible. Thanks! 
EOS M - EOS M2

Danne

  • Contributor
  • Hero Member
  • *****
  • Posts: 5698
Re: Canon EOS M
« Reply #3424 on: Today at 11:38:20 AM »
When you "half-press" shutter, it shows you "framing" as long as you hold down the shutter half-way.
I mean I want "Realtime" liveview to change to "Framing" with a click of a button and stay like that, instead of going all the way into the menu to change from realtime preview into framing and then back again, if that's possible. Thanks! 
Not sure why this would be useful. Would be nice if you could explain how you use this? Anyway. INFO button is the only button left to be used here so here we go. Build below


New build:
https://www.magiclantern.fm/forum/index.php?topic=9741.msg208959#msg208959

Toggle between Real-time and framing preview mode if assigning INFO button