Author Topic: Canon EOS M (Read 1756093 times)

nanomad · « **Reply #125 on:** April 08, 2014, 08:46:25 AM »

The next nightly build will have the eosm installer (fir). Put in on the card along all the other ML files, run it once and you'll have both the card and the camera bootable. It also doubles as an un installer should you need it.

arielp · « **Reply #126 on:** April 08, 2014, 12:10:48 PM »

is the Shutter bug with 18-55 already gone in latest nightly?

about to jump to ML but still hesitate due to shutter bug...

nanomad · « **Reply #127 on:** April 08, 2014, 12:38:17 PM »

No because we can't reproduce it reliably

indiejack · « **Reply #128 on:** April 08, 2014, 04:08:26 PM »

Quote from: nanomad on April 08, 2014, 08:46:25 AM

The next nightly build will have the eosm installer (fir). Put in on the card along all the other ML files, run it once and you'll have both the card and the camera bootable. It also doubles as an un installer should you need it.

Thanks for the info nanomad!

lecore · « **Reply #129 on:** April 09, 2014, 11:26:17 AM »

Hello everyone,

1st post here in ml forum

I just installed the ml for Eos-m (Nightly.2014Apr07.EOSM202).

1st all it works good and almost stable for such a fresh ml-port.

THANKS A LOT to the DEVELOPERS!!!

Some small problems i encountered :

After entering the menu with two-finger tab for ml setup menu, it often exits the menu without any user action.
I dont know why, is it a timer which closes the menu after a given period with no action?
This strange automatism really disturbs the workflow while setting up ml, how can i change this?

Other proposals: I think the navigation inside the ml functions is lil hustle atm. Always switching between touch and buttons is no good for fast setup.
I would love to see all navigation could be done via buttons, so you could keep your LCD-Hood on and use buttons only.

Maybe some hold down button actions could improve access to ml without the need of using the touch.

Cheers dave

huangyanlai · « **Reply #130 on:** April 09, 2014, 04:27:59 PM »

Quote from: nanomad on April 04, 2014, 08:07:36 AM

The current dual iso implementation assumes a constant address in memory for the iso registers, which isn't true for all digic v cameras.
I'll post a build later today with a different address location that may help.

This nightly build Apr09 still shows the same error for dual iso.

indiejack · « **Reply #131 on:** April 10, 2014, 06:46:17 PM »

Grabbed the nightly (2014Apr09.EOSM202) formatted card, dropped files onto card, run upgrade and got a flicker of the installing screen then a rapid blinking orange light, waited around 15 seconds, removed battery. Did this process and formatting and such 4x - have I missed something?

I didn't make the card bootable is that required still?

nanomad · « **Reply #132 on:** April 10, 2014, 06:48:15 PM »

I'll check. You did everything right

Oliver · « **Reply #133 on:** April 13, 2014, 09:35:33 AM »

I had the exactly same experience than Indiejack. Formattet card, evan made it bootable to make sure... copied all the files and then startetd the update process. A short flash shows up, then the screen gets dark and the light keeps flashing forever. Exact the same thing as described two posts before. Tried also several times. Since today appeared a new version of the nightly builds for EOS M a hoped that the problem ist fixed, butwith Version 2014Apr13.EOSM202 it is exactly the same as Version 2014Apr09.EOSM202.

Since I guess that your Versions are at least once testet before published, i was thinking my SD Card might have a problem (I use a 2 GB card) but installing a fresh 202 Version from Canon works well. If anybody would have an idea, I would be very thankful. To be totally honest. I bought my Canon EOS M purely for the reason I read that it is possible to do RAW recording with magic lantern with it. Of course I want to get it going. I like to make living photography, so I only need a few seconds of video in Web Size (Full HD not needed really) always from a tripod, no camera movement, no sound (so all the weaknesses of the camera do not really count), but every single image as crisp as possible. The Canon EOS M is perfekt for this purpose and a small budget.

nanomad · « **Reply #134 on:** April 13, 2014, 09:39:46 AM »

The EOSM installer is broken and should not be used until further notice

chris_overseas · « **Reply #135 on:** April 13, 2014, 01:06:15 PM »

It looks like the installer should be fixed in the next nightly: https://bitbucket.org/hudson/magic-lantern/pull-request/470/eosm-use-traditional-boot-method-this/diff

nanomad · « **Reply #136 on:** April 13, 2014, 01:16:58 PM »

Well, not until it gets merged

KSphoto · « **Reply #137 on:** April 14, 2014, 04:52:38 AM »

I have been using ML version from about 4-2-14. I don't have the exact figures, but I noticed that when using the camera with a non ML card my auto focus has changed. It seems that continuous focus works but if it is disabled it will not focus with a touch of the screen only a press of the shutter. I always thought it was fun to just touch an object on the screen and watch it focus. I'm bummed. Anyone else have this problem?

Any feedback on the newest (4-13-14) version?

Update. I have focussing like I was expecting. I just set the focus box to the smallest option and enabled full time autofocus. Simple enough.

arielp · « **Reply #138 on:** April 15, 2014, 05:36:24 AM »

Quote from: KSphoto on April 14, 2014, 04:52:38 AM

I have been using ML version from about 4-2-14. I don't have the exact figures, but I noticed that when using the camera with a non ML card my auto focus has changed. It seems that continuous focus works but if it is disabled it will not focus with a touch of the screen only a press of the shutter. I always thought it was fun to just touch an object on the screen and watch it focus. I'm bummed. Anyone else have this problem?

Any feedback on the newest (4-13-14) version?

i'm not installing ML yet (camera still virgin), but when i disabled continuous focus, touch to "focus" is also not available.
i belive this is not related with ML.

touch to focus only available when continuous focus is enabled.

KSphoto · « **Reply #139 on:** April 16, 2014, 04:01:03 AM »

I checked twice and can't find any "touch to focus " options even when in continuous focus mode. I'm using the 22mm lens.

funkysound · « **Reply #140 on:** April 22, 2014, 01:28:55 PM »

I just installed a new ML Version (04.21.) and realized that there is no audio department any more (audio out). Does it come back with more features or is it gone forever because some things do not work with EOS M?
All the other stuff like shutter speed in Video modus seem to work good now - at least during a short test. I also had no shutter-bug with the 18-55.

EVVK · « **Reply #141 on:** April 22, 2014, 10:02:03 PM »

With older nightlys the shutter bug appeared also after warm boots, which seems to be fixed now, it seems to be a lot better.

However, it still appears with cold boots (re-seat battery and press power). After that I needed to re-seat the lens to get the shutter working again. (11-22 and 18-55 behaves the same). But like I mentioned it now persists warm-boots, so it's a lot better, and seems like we are headed in the right direction.

Needs more testing...

a1ex · « **Reply #142 on:** April 23, 2014, 08:20:56 AM »

Quote from: EVVK on April 22, 2014, 10:02:03 PM

Amazing the shutter bug doesn't seem to appear with 11-22mm either and the last nightly.

We didn't do anything to fix it, but the latest builds contain the classic boot method (from the good old days when ML ran only on 5D2 and 550D). However, my theory says the bug is still there, but the probability of it appearing has been changed (and some people who had the bug before may not have it with new builds, but other people who didn't have the bug before might have it now).

To confirm or invalidate my theories, please report how it works for you.

The nightly builds from 2014-04-18 and newer use the classic boot method, and the previous ones use the cache hacked method. So, try checking a few builds before this date, and a few builds after this date, and write down whether they have the bug or not. To draw a meaningful conclusion, I need results from at least 10 testers.

kaos42ze · « **Reply #143 on:** April 23, 2014, 02:57:36 PM »

Does the Advanced Bracketing ( DOF ) work in EOS-M ?

cinto.brewer · « **Reply #144 on:** April 23, 2014, 05:40:32 PM »

2014Apr20.EOSM202 still has the bug for me.

lochmorie · « **Reply #145 on:** April 24, 2014, 12:33:14 PM »

I have been using the nightly builds over the past month since getting the 11-22mm lens - all have the shutterbug,
including 2014Apr23.EOSM202

I used to get fairly regular red light hang-ups requiring a battery pull on start-up. No problems with that using
the latest build.

EVVK · « **Reply #146 on:** April 26, 2014, 09:57:17 AM »

Crap, seems like so, just had a good luck the first 5 runs, it's been a while when I last tried the nightlys. Anyway, I now get the shutter bug more frequently again, if not every time.

Has anyone been doing any analysis of the lenses? Similar to this:
http://pickandplace.wordpress.com/2011/10/05/canon-ef-s-protocol-and-electronic-follow-focus/
Maybe it could reveal what differs the zoom lenses. $:-\$

holicow · « **Reply #147 on:** April 26, 2014, 03:18:57 PM »

Hi there @all,

This is great work!

But one little thing:

I installed magiclantern-Nightly.2014Apr25.EOSM202.zip. When i go into the ML menu, it leaves in 5 seconds. This is a very short time. Is there any config option to increase the menu off timeout?

funkysound · « **Reply #148 on:** April 26, 2014, 05:55:59 PM »

Hi Holicow,
this is sometihing which makes everybody crazy and was mentioned a few times - in older posts someone said that ii is not possible to increase the time here because it´s got to do with some canon internal time settings - if I remember it right

holicow · « **Reply #149 on:** April 26, 2014, 10:06:46 PM »

Hi funkysound,

Does this happen with other camera model ports of ML (600D or 50D eg) also? If it does not, it would be just a port specific setting in the sourcecode. Any developers for the M port here?

Also if i press eg in the Help section some entries, it will be shown forever as long i do not press anything (shutter eg), so it must be possible i think.

News:

Author Topic: Canon EOS M (Read 1756093 times)