Current raw video capabilities - All ML cameras

Started by Roman, June 06, 2013, 08:54:13 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

togg

Quote from: André Normandin on February 14, 2014, 04:54:24 AM
What settings did you have and what card?
I'm trying to do that but can't seem to be able to... :(

I can film 1872 x 1012 continuous with the Komputerbay 64GB. It's not so different!

edit: I can also do 1880 x 1016 with my fastest/more stable Komputerbay 64GB.
max stable speed seems to be 78,8.

EuAcelasi

Could anybody, please, help me understand where is the setting for the CROP MODE for 5d markiii... I looked over in all ML menu and Canon too... but nothing about 3x Crope Mode... I`m using a recent nightly built...

dmilligan



keikun007


andy kh

can anyone advice me which consumer camera should i buy for recording mlv raw? i got 550D. it can shoot 1152 X 432 continous which is very small resolution. i m planing to go for 650D since it can write uoto 40mb/s
5D Mark III - 70D

johnny5d

Hi all,

I was planning on selling my old 5D classic to buy a 7D because I love to shoot video again.
But now I see that raw is not an option for 7D is that true?

Kind regards,

Johnny


johnny5d

Sad to here... I do see raw footage online from the 7D.
Was it bad ML version? and still need more time?

Is that the reason why I can't see It in the download menu?

Walter Schulz

Sorry, you got it wrong (again): You asked if something is true. It is not, so I answered with "No".

http://www.magiclantern.fm/forum/index.php?topic=7464.0

rainless

Can the 5D3 bootflag still not be undone? And... if so... then why is that?

Also... what would happen if you simply loaded with a card that didn't have Magic Lantern on it? Would the wakeup time go back to .2 seconds?

Sorry if this is all redundant, but I just got into RAW video like LAST WEEK, and there's only about 20,000 threads I'd have to go over to find these answers now.
The Gear - Canon 5D Mark II, Yongnuo 565EX flash, PhotoSel 3mx3m backdrop stand with 3mx3m muslin backdrops. Elinchrom D-Lite 4 it studio lights, some big-ass 110cm reflector. Unlimited German Models

DavidSh

Quote from: rainless on March 28, 2014, 04:01:22 PM
Can the 5D3 bootflag still not be undone? And... if so... then why is that?

Also... what would happen if you simply loaded with a card that didn't have Magic Lantern on it? Would the wakeup time go back to .2 seconds?

Sorry if this is all redundant, but I just got into RAW video like LAST WEEK, and there's only about 20,000 threads I'd have to go over to find these answers now.
no problem for undone bootflag anymore.
Update to 1.2.3 and install from nightly 5d3.123
http://www.magiclantern.fm/forum/index.php?topic=11017
600D | 5D3 | macOS Sierra | http://www.GentleDogMovie.com

johnny5d

What is the cheapest CF card I can use for the highest RAW video resolutie?

I use 5d mkii


reddeercity

Quote from: johnny5d on March 28, 2014, 04:57:34 PM
What is the cheapest CF card I can use for the highest RAW video resolutie?
I use 5d mkii
Scandisk Extreme Pro 90MB/s 32GB will get 1792x814 2.20:1 A.R. 23.976p 62.5MB/s buffer fill rate "0"
12,475 frames 8.6 minutes on full card.

togg

Quote from: johnny5d on March 28, 2014, 04:57:34 PM
What is the cheapest CF card I can use for the highest RAW video resolutie?

I use 5d mkii

komputerbay 64 GB 1000X, [email protected] continuous if you get the right card, if you don't send it back and take another, I was lucky enough to have a really good card and a good card that need to be pushed a little bit before.
it's around 100 euro.

ted ramasola

Quote from: johnny5d on March 28, 2014, 04:57:34 PM
What is the cheapest CF card I can use for the highest RAW video resolutie?

I use 5d mkii

Get a KomputerBay 64gig 1000X.
5DmkII  / 7D
www.ramasolaproductions.com
Texas

xNiNELiVES


blaow

for raw video 1808x* resolutions are no longer the max horisontal res on newer builds for canon 6d when selecting anything higher than 1792, 1792 is limit, why so? I was able to do so with builds from february.

poromaa

Trying to figure out if 1856x844 is the highest resolution I can get with my 5dmkii?
If not - will a Sandisk Extreeme Pro 160MB/s do any difference against my current Sandisk Extreeme Pro 100MB/s?

So far i have tested:
Transcend 64GB 1000x (not stable for even 1856x844) - sometimes continuous, but mostly just some seconds. I returned it.
Sandisk 128GB 100MB/s* (stable 1856x844 MLV w. sound). - only about 500 frames if going 1856x928

By the way, does anyone know if there is any live thread to post the 5min ppm (benchmark-files) for above cards?

Renovatio

50d vs 650d Raw cheap solution: which one should i get?

Thanks.

andy kh

Quote from: Renovatio on May 02, 2014, 12:19:54 AM
50d vs 650d Raw cheap solution: which one should i get?

Thanks.

50D if u dont need audio and the flip screen. 650D if u need audio and the flip screen
5D Mark III - 70D

Renovatio

Quote from: andy kh on May 02, 2014, 03:17:05 PM
50D if u dont need audio and the flip screen. 650D if u need audio and the flip screen
Well, no, no need audio (zoom h1) and flip screen. Only point is i've to but a CF and would like to know the minium to obtain the best that i can. Thanks a lot.

UmbertoVicto

Quote from: Roman on June 06, 2013, 08:54:13 AM
Hey, I thought I would put together a quick comparison of where things are currently at with raw video for each camera type, and what the comparative upsides/downsides/limitations/strengths/etc of each are.

I've listed them top to bottom, of which to my understanding are currently the best options.

Here's a google docs version that you can edit:
https://docs.google.com/spreadsheet/ccc?key=0AgQ2MOkAZTFHdFFIcFp1d0R5TzVPTVJXOEVyUndteGc#gid=5




Apparently raw video works good for 7D..

what about short battery life and processor's heating...
ML is a wonderful firmware but i'll install it mostly for raw video...so what you suggest me?

I'll use a lexmark professional 1066x, is ok for continuos raw recording?

glassescreditsroll

How dose pdr work for 650d any updates on it?

sleepinghouse

Quote from: poromaa on April 22, 2014, 03:47:49 PM
Trying to figure out if 1856x844 is the highest resolution I can get with my 5dmkii?
If not - will a Sandisk Extreeme Pro 160MB/s do any difference against my current Sandisk Extreeme Pro 100MB/s?

So far i have tested:
Transcend 64GB 1000x (not stable for even 1856x844) - sometimes continuous, but mostly just some seconds. I returned it.
Sandisk 128GB 100MB/s* (stable 1856x844 MLV w. sound). - only about 500 frames if going 1856x928

By the way, does anyone know if there is any live thread to post the 5min ppm (benchmark-files) for above cards?

I have a 5dmkii and I just tested up to 1856 X 1044 MLV with sound tonight. I only managed to record up to 5 seconds before it started skipping frames, using a komputerbay 32Gb 1000X UDMA7. 500 frames continuous at 1856X844 was the longest and most stable you could shoot at?
5d mkii  ||  canon 50 f/1.4  ||  hexanon 40 f/1.8  ||  tokina 20-35 f/2.8  ||  zenitar 16 f/2.8  ||