Author Topic: Canon 700D / T5i (Read 937186 times)

Felipe · « **Reply #775 on:** July 20, 2015, 09:09:04 PM »

Great if you can do that.
By the way where in the menu is located that feature ?

mentos · « **Reply #776 on:** July 20, 2015, 09:46:51 PM »

I turned on ETTR, Autoexpo and defilck after that the live view did not work properly anymore. I have updated the firmware and uninstall the ML and the bootflag of the camera , but not resolved . The live view is not more adjusting with the camera settings, exposure is changing even automatically without the ML in manual mode. What I do?

Walter Schulz · « **Reply #777 on:** July 20, 2015, 09:54:34 PM »

. Remove battery. Format card in cardreader. insert battery. Reset cam to factory defaults (including C.Fn settings)l Remove battery. Reinsert battery and card and retry. Report results

pkindt · « **Reply #778 on:** July 20, 2015, 10:43:51 PM »

Felipe, it is not in the menu unless you change the source code.

Felipe · « **Reply #779 on:** July 20, 2015, 11:01:30 PM »

That is the feature a dream with

mentos · « **Reply #780 on:** July 22, 2015, 01:23:06 AM »

Walter Schulz

I'll try it, but I already formatted the card ( in the camera) and I did the firmware update to 1.1.4 . ML reinstalled, but still the same with or without ML.

Tks in advance.

Walter Schulz · « **Reply #781 on:** July 22, 2015, 01:37:40 AM »

Format card in cardreader, format in cam after. Reset cam to factory defaults (including C.Fn settings). Report results.

mentos · « **Reply #782 on:** July 22, 2015, 06:42:53 PM »

Walter Schulz

Great!
Works fine now.
Tks a lot.

Gavin Morrisson · « **Reply #783 on:** July 24, 2015, 03:28:37 AM »

Hello Everyone...

Maybe this is a silly question, but I have not been able to get any HDMI out on the Rebel T5i. I was using a nightly build with firmware 1.1.4.

Any ideas?

zilvis310 · « **Reply #784 on:** July 28, 2015, 11:16:32 PM »

hey boys and girls i got a problem with importing ML to my sd card any idea how to fix it? http://imgur.com/a/qVzQ9

Walter Schulz · « **Reply #785 on:** July 29, 2015, 12:20:14 AM »

Format card in cam and retry.

zilvis310 · « **Reply #786 on:** July 29, 2015, 05:20:31 PM »

doesnt help ;/

Walter Schulz · « **Reply #787 on:** July 29, 2015, 05:45:06 PM »

You have to use cardreader or SD-card slot to transfer files to card.

Datadogie · « **Reply #788 on:** July 30, 2015, 12:53:50 AM »

http://wiki.magiclantern.fm/install

IBIRRU · « **Reply #789 on:** August 03, 2015, 07:51:59 PM »

Hello everyone!
I've just buy a 700D and installed ML.
Until now I experiment ML using an old 500D and compiling myself.
I use ML mainly for astrophotography.
I ask you about the FPS OVERRIDE function.
In my submenu I don't find the "High FPS" option -- High FPS - changes FPS without altering shutter speed and allows a slight overcranking (60D, 600D).

Is This function only for 60D and 600D?

Thanks

mentos · « **Reply #790 on:** August 06, 2015, 08:58:20 PM »

I really like to have the headphone monitoring working in T5i . I am willing to create whatever it takes to make it happen . where should I start?

dmilligan · « **Reply #791 on:** August 10, 2015, 05:46:33 PM »

Quote from: mentos on August 06, 2015, 08:58:20 PM

where should I start?

Are you familiar with C and/or ARM assembly?

No:
start here -> Embedded Systems & Development [LEARNING]

Yes:
Getting started with development
Getting a development machine up and running and developing.
Tutorial: finding stubs
Easy Coding Tasks
https://bitbucket.org/hudson/magic-lantern/branch/new-sound-system

Boothmeister · « **Reply #792 on:** August 10, 2015, 09:48:38 PM »

Hi. Looking for a little assistance if possible?

I'm trying to install Magic Lantern for my Canon 700d but can't seem to do it?

I'm currently running software v.1.1.4 and I've completed the SD card format in camera, placed it in my PC and downloaded the ML files from the site. It says to copy over the ML folder ONLY which I have done. When I then put the SD card in the camera, on <P> mode and try to update the firmware it just says that there is no firmware on the card?
I've tried copying the ML folder as a ZIP and extracted but get the same result.

Am I doing anything glaringly obvious?

Thanks, Chris

Walter Schulz · « **Reply #793 on:** August 10, 2015, 09:58:49 PM »

Sorry, where did you find the instruction to copy ML folder over only? This is just wrong. You have to copy extracted contents to card. Autoexec.bin, *.fir and (of course) ML directory with all sub-directories and files within!

Boothmeister · « **Reply #794 on:** August 11, 2015, 12:36:45 PM »

Just on the download page? Maybe I've just misinterpreted the instructions? Will try copy everything over and see if that works.

Ta very much.

Walter Schulz · « **Reply #795 on:** August 12, 2015, 06:36:49 AM »

No, you just haven't found the modules tab.
Please toggle screens.

mentos · « **Reply #796 on:** August 12, 2015, 03:03:12 PM »

thanks dmilligan

wicq · « **Reply #797 on:** August 12, 2015, 09:39:54 PM »

Hi, i dont know what the hell is happening, but some weeks ago i could record 9 seconds of mlv and 11 seconds of raw 1 at 1728x736 using a 32gb kingston card, today i can only record 3-4 damn seconds, what the hell has happened?, using latets ML latest build for 1.13 firmware, i havent change any settings, i actually restore ml and canon setting but before restore it was worse, only 2 seconds, like when using a fucking cheap card, help please

Walter Schulz · « **Reply #798 on:** August 12, 2015, 09:43:18 PM »

Format card inside cardreader with ExFAT file system. Use EOScard/Macboot to make card bootable, wipe all files and directories from card and copy extracted nightly build contents to card.
Retry.

wicq · « **Reply #799 on:** August 12, 2015, 09:58:43 PM »

Walter Schults, thanks bro for the tip, but it was my fault. I let the res at 720 30fps and then in the middle of a mental breakdown cause im mentally ill

I change to 1080 30 fps . the 11 secs and 9 secs for raws can be done at 1080p 24 fps so it works as before now. Damn I erased cinestyle profile, i Have to reinstall it again, but is cinestyle profile(or any other flat profile) make any difference when recording in raw? Thanks again Walter for the quick help

News:

Author Topic: Canon 700D / T5i (Read 937186 times)