Author Topic: Canon 650D [OLD] (Read 1269661 times)

33black · « **Reply #1325 on:** May 08, 2013, 01:19:48 AM »

There it is, didn't hit the info buttons.

Sorry, I'm a newbie, and I tend not to read instructions because I like to pretend i'm a man's man.

33black · « **Reply #1326 on:** May 08, 2013, 01:23:09 AM »

So everything looks like it's working for me in general.

It's just that damn FPS override.

1% · « **Reply #1327 on:** May 08, 2013, 01:52:40 AM »

FPS sucks on all digic V.

TomJ · « **Reply #1328 on:** May 08, 2013, 03:34:16 AM »

Quote from: 1% on May 08, 2013, 01:52:40 AM

FPS sucks on all digic V.

Yeah. But why Canon..., Why..?, dammit!!!

pemstudio · « **Reply #1329 on:** May 08, 2013, 01:52:13 PM »

I would like to ask: will HDR be available in photos?

blade · « **Reply #1330 on:** May 08, 2013, 01:54:27 PM »

Quote from: pemstudio on May 08, 2013, 01:52:13 PM

I would like to ask: will HDR be available in photos?

It is already there in the stock canon firmware. And you even have a selection on the dial for it...

Lucas_W · « **Reply #1331 on:** May 08, 2013, 01:59:35 PM »

They mean ML's HDR-Photo function (http://wiki.magiclantern.fm/userguide#hdr_bracketing).
and the answer is yes, I don't think there's any reason that it won't be eventually included on the 650D but just not at the moment.

blade · « **Reply #1332 on:** May 08, 2013, 02:03:19 PM »

Then the answer would be yes. It should work, however it depends on props. And for now no props are active. So maybe in the next alpha or so some props may be active.

buckbullstallion · « **Reply #1333 on:** May 08, 2013, 02:45:07 PM »

Okay, 1 question, does anyone use a battery pack, and if so does the battery pack work after the install. After I unlocked the boot loader, and run the ML on my 650 I am no longer getting the battery pack to work. If anyone could verify if their battery pack works, and perhaps what brand you have that would be great. I have a generic brand. or if there is a switch inside ML that enables or disables the battery I would like to know thank you. I am so happy to have my camera with ML that I can care less at this time. but just thought I would ask that question perhaps I messed something up. But right now after applying this update I no longer am able to use my battery pack.

OliverD · « **Reply #1334 on:** May 08, 2013, 03:25:24 PM »

Quote from: buckbullstallion on May 08, 2013, 02:45:07 PM

If anyone could verify if their battery pack works, and perhaps what brand you have that would be great.

I have a cheap "Qumox" Battery grip
http://amazon.de/dp/B00B8PBBEU

Works perfect with ML

nanomad · « **Reply #1335 on:** May 08, 2013, 04:18:17 PM »

Original canon BG and AC adapter. They work fine with ML (I always have them on unless I need to enable the bootflag)

mojo · « **Reply #1336 on:** May 08, 2013, 04:50:40 PM »

just to confirm, the 650D canon firmware to go with prealpha2 would be ver 1.0.1?

nanomad · « **Reply #1337 on:** May 08, 2013, 05:10:48 PM »

There are no other firmwares for the 650D, so yes

mojo · « **Reply #1338 on:** May 08, 2013, 05:12:06 PM »

okie dokie.. thanks

Yeti183 · « **Reply #1339 on:** May 08, 2013, 08:26:35 PM »

Hi nanomad

Thanks so much for your work. I'm new to ML and to digital photography (the 650D is my first digital - used my T90 before) and it is fantastic to get such an awesome tool from you guys.
Will have to play around with it and learn a lot. I'm totally excited.
thanks, thanks, thanks!!!!

to buckbullstallion:

Using a Phottix BG-550D batterygrip and it is working normal - all buttons work.

Best, Robert

buckbullstallion · « **Reply #1340 on:** May 08, 2013, 10:44:50 PM »

Quote from: nanomad on May 08, 2013, 04:18:17 PM

Original canon BG and AC adapter. They work fine with ML (I always have them on unless I need to enable the bootflag)

I use a photive PH-GRP550D I know its a t2i system but was working fine, Maybe my AC battery block did something to the system. Sad face. it does work with the battery and the AC battery pack. I will fully charge the batteries and recheck will let you guys know. I just know that the pack above mentioned was working just prior to the Update and now doesn't. If it doesn't work. Again I accept full responsibility for my actions on my camera, but if someone has this battery pack adapter and could verify that theirs works that would be great.

I am so Thrilled that ML is working that that doesn't matter. ML FTW. Thank you nanomad and all devs for making this possible on the 650D

buckbullstallion · « **Reply #1341 on:** May 08, 2013, 10:46:42 PM »

Quote from: Yeti183 on May 08, 2013, 08:26:35 PM

Hi nanomad

Thanks so much for your work. I'm new to ML and to digital photography (the 650D is my first digital - used my T90 before) and it is fantastic to get such an awesome tool from you guys.
Will have to play around with it and learn a lot. I'm totally excited.
thanks, thanks, thanks!!!!

to buckbullstallion:

Using a Phottix BG-550D batterygrip and it is working normal - all buttons work.

Best, Robert

JINX and that's the same one I am using. I will fully charge batteries and give it another go. thanks for responding and reading my MIND!!! LOL they may not be the same, but they are both 550D just probably rebranded.

buckbullstallion · « **Reply #1342 on:** May 08, 2013, 10:59:32 PM »

Also, to the DEVS, is there a way to move the Memory text that is on top of my battery indicator into a more black spot on the screen, like a shift of 8 fonts to the Right?

buckbullstallion · « **Reply #1343 on:** May 09, 2013, 01:14:45 AM »

Tested the BGRip with full batteries -- nothing changes. I will re-order one and see if its my BG grip that went bad. I will repost in 2 days regarding this. Also is there a way to re-lock the firmware to original to test if that works?

TomJ · « **Reply #1344 on:** May 09, 2013, 04:50:24 AM »

Quote from: buckbullstallion on May 09, 2013, 01:14:45 AM

Tested the BGRip with full batteries -- nothing changes. I will re-order one and see if its my BG grip that went bad. I will repost in 2 days regarding this. Also is there a way to re-lock the firmware to original to test if that works?

I've used Meike batt grips with sterling effect over the years (bashed around in India, Kuwait, etc). Never a problem, solid, well built and cheap (like $30 on the A). Works perfect with ML PA2. So yeah, send yours back for another copy (like we seem to have to do with lenses on a regular basis these days...)

Lucas_W · « **Reply #1345 on:** May 09, 2013, 07:00:37 AM »

To boot into the "original firmware" you can hold down the SET button as you switch the camera into the On mode, a message will appear on the screen saying "Magic OFF".

buckbullstallion · « **Reply #1346 on:** May 09, 2013, 07:06:33 AM »

Quote from: TomJ on May 09, 2013, 04:50:24 AM

I've used Meike batt grips with sterling effect over the years (bashed around in India, Kuwait, etc). Never a problem, solid, well built and cheap (like $30 on the A). Works perfect with ML PA2. So yeah, send yours back for another copy (like we seem to have to do with lenses on a regular basis these days...)

Oh yeah, I just called Canon on it, but they wanted me to start up a case, I just hung up on Him. I will diagnose myself, and yes I agree boomerang it if it fails. Quicker and faster then any RMA.

Quote from: Lucas_W on May 09, 2013, 07:00:37 AM

To boot into the "original firmware" you can hold down the SET button as you switch the camera into the On mode, a message will appear on the screen saying "Magic OFF".

The battery pack no longer works with camera therefore cannot do that. It may be in the unlocking of the Boot loader. I am just hoping that it did not fry anything in the camera as I was removing the battery pack. I am hoping that the battery pack if anything failed which I will test on Friday and will post my findings. I just wanted to know if there was a way to Relock the boot loader into the original firmware. I am sure if a new firmware comes out I will be able to apply that and should relock the BL.

buckbullstallion · « **Reply #1347 on:** May 09, 2013, 09:18:10 AM »

Okay so I go to debug menu>burn-in tests>stubs API test:
Test completes with 85 pass 1 fail. Is that normal?

a1ex · « **Reply #1348 on:** May 09, 2013, 10:55:28 AM »

Yes, the halfshutter test fails because it requires properties.

oli650d · « **Reply #1349 on:** May 09, 2013, 11:06:38 AM »

Thank you has all for alpha 2
I little finally to play with
Good luck for the final version

News:

Author Topic: Canon 650D [OLD] (Read 1269661 times)