Author Topic: Canon 650D [OLD]  (Read 978965 times)

Lucas_W

  • Freshman
  • **
  • Posts: 72
Re: Canon 650D [Status: Hello, world!]
« Reply #925 on: April 16, 2013, 06:52:54 PM »
Yes, I was getting that when I was originally trying to get it to work, but I forget what I did. Maybe you need to do the EOScard step when you put the http://nanomad.magiclantern.fm/650D/magiclantern-v2.3.NEXT.2013Feb02.650D.BOOTFIX.zip on in that first step as well as after you replace the files?
Canon EOS 650D + Kit lens, EF 50mm 1.8 and 52mm polariser.

Shadeena

  • New to the forum
  • *
  • Posts: 5
Re: Canon 650D [Status: Hello, world!]
« Reply #926 on: April 16, 2013, 07:22:19 PM »
Same thing happened. I guess I better be patient and wait for an official public release before I do something majorly wrong :) thanks anyway

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12390
  • Quarantined
Re: Canon 650D [Status: Hello, world!]
« Reply #927 on: April 16, 2013, 07:30:15 PM »
Quote
EnableMainFirm

That's for unbricking, not for enabling the boot flag.

Shadeena

  • New to the forum
  • *
  • Posts: 5
Re: Canon 650D [Status: Hello, world!]
« Reply #928 on: April 16, 2013, 07:32:01 PM »
That makes sense I guess, have no idea why it's saying so, hmm maybe it's not liking the files and it's enabling the main firmware to avoid damage?

Lucas_W

  • Freshman
  • **
  • Posts: 72
Re: Canon 650D [Status: Hello, world!]
« Reply #929 on: April 16, 2013, 07:38:15 PM »
All I know is I kept getting that until I somehow got the right setup and got ML working.

Ah, that's right. I also adapted my method of getting it working on my camera from the method from installing the pre-alpha that's no-longer available (http://www.magiclantern.fm/forum/index.php?topic=3697.msg24949#msg24949). Obviously you can't do the dumper part (and I didn't need to). If you (or anyone) wants to continue, you'll have to interpret that and think about what steps to do. I'd be more descriptive, but I'm off to bed now.
Canon EOS 650D + Kit lens, EF 50mm 1.8 and 52mm polariser.

Slasklita

  • New to the forum
  • *
  • Posts: 9
Re: Canon 650D [Status: Hello, world!]
« Reply #930 on: April 16, 2013, 07:46:50 PM »
Yeah well it didnt work for me either :(

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Canon 650D [Status: Hello, world!]
« Reply #931 on: April 16, 2013, 09:13:09 PM »
JUST DON'T USE THAT AUTOEXEC OR FIR
It bypasses a critical safety check so it can potentially damage your camera. For real this time
And that FIR is no good, unless you have a screwed up bootflag on your camera
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Canon 650D [Status: Hello, world!]
« Reply #932 on: April 16, 2013, 09:25:01 PM »
Lucas, can you send the file you gave me on IRC via PM?
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

Slasklita

  • New to the forum
  • *
  • Posts: 9
Re: Canon 650D [Status: Hello, world!]
« Reply #933 on: April 16, 2013, 10:05:30 PM »
JUST DON'T USE THAT AUTOEXEC OR FIR
It bypasses a critical safety check so it can potentially damage your camera. For real this time
And that FIR is no good, unless you have a screwed up bootflag on your camera
How does it affect the camera? How do i know if something broke?

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Canon 650D [Status: Hello, world!]
« Reply #934 on: April 16, 2013, 10:08:26 PM »
Good question. If the camera still works correctly it probably didn't damage anything
(Truth be told this check was missing in the pre-alpha too but we may have been lucky)
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

StreetShotz

  • New to the forum
  • *
  • Posts: 9
Re: Canon 650D [Status: Hello, world!]
« Reply #935 on: April 17, 2013, 01:09:25 AM »
So excited for the release. I often fondle my camera and envision the moments when I will slid that little ML card into her.....this sounds dirty.....but seriously I cant wait!!!

You guys rock!

teecee

  • New to the forum
  • *
  • Posts: 15
Re: Canon 650D [Status: Hello, world!]
« Reply #936 on: April 17, 2013, 01:55:25 AM »
i cant wait to see ML in action for canon 650D  ;D

hope it comes with video time lapse

Lucas_W

  • Freshman
  • **
  • Posts: 72
Re: Canon 650D [Status: Hello, world!]
« Reply #937 on: April 17, 2013, 07:53:10 AM »
Well there we go. I guess it is best to wait until the official alpha, though I still don't get how I managed to get it working on my camera.
Canon EOS 650D + Kit lens, EF 50mm 1.8 and 52mm polariser.

markdagraca

  • Just arrived
  • *
  • Posts: 1
Re: Canon 650D [Status: Hello, world!]
« Reply #938 on: April 17, 2013, 08:18:28 AM »
Can you uninstall ML if you do not like it and want to go back to the orginal FW or is it now permanent

Lucas_W

  • Freshman
  • **
  • Posts: 72
Re: Canon 650D [Status: Hello, world!]
« Reply #939 on: April 17, 2013, 08:48:04 AM »
Mine works without the card in, and I can boot up without ML running by holding down SET as I turn it on.
Canon EOS 650D + Kit lens, EF 50mm 1.8 and 52mm polariser.

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Canon 650D [Status: Hello, world!]
« Reply #940 on: April 17, 2013, 10:08:17 AM »
You can always remove the bootflag from both the camera (by re-running the fir you used to install ML and turning the dial when asked) or the SD card (by doing a low level format with KEEP ML option turned off)
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

jgallant1990

  • Just arrived
  • *
  • Posts: 1
Re: Canon 650D [Status: Hello, world!]
« Reply #941 on: April 17, 2013, 01:43:35 PM »
Hate to be this guy, but any idea of a timeframe for stable release?

blade

  • Member
  • ***
  • Posts: 195
Re: Canon 650D [Status: Hello, world!]
« Reply #942 on: April 17, 2013, 01:54:59 PM »
If you would have read the tread, you would know...  Its done when its done. No time frame, no deadline, no ms project planning.
eos400D :: eos650D  :: Sigma 18-200 :: Canon 100mm macro

Paxman

  • New to the forum
  • *
  • Posts: 4
Re: Canon 650D [Status: Hello, world!]
« Reply #943 on: April 17, 2013, 01:58:17 PM »
These threads really need a sticky post (that is unaffected by scrolling) giving the answer to the most frequent question... ::)

Lucas_W

  • Freshman
  • **
  • Posts: 72
Re: Canon 650D [Status: Hello, world!]
« Reply #944 on: April 17, 2013, 02:04:49 PM »
Or plaster this everywhere

http://wiki.magiclantern.fm/faq?&#troll_questions

Or better yet, make it pop-up in a lightbox kind of embedded pop-up thing for non-registered users.
Canon EOS 650D + Kit lens, EF 50mm 1.8 and 52mm polariser.

Phillips321

  • New to the forum
  • *
  • Posts: 18
Re: Canon 650D [Status: Hello, world!]
« Reply #945 on: April 17, 2013, 03:59:49 PM »
Or plaster this everywhere

http://wiki.magiclantern.fm/faq?&#troll_questions

Or better yet, make it pop-up in a lightbox kind of embedded pop-up thing for non-registered users.

Or better yet, for people like me who are itching in their pants to get a working version of ML advise that monetary donations will not help but coders/programmer will.

Note to people monitoring this thread: How many people eagerly checked the thread to see if my post was a release???? ;-)

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Canon 650D [Status: Hello, world!]
« Reply #946 on: April 17, 2013, 04:06:20 PM »
Or better yet, for people like me who are itching in their pants to get a working version of ML advise that monetary donations will not help but coders/programmer will.

We are not accepting donations, so that should be clear enough ;)
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

oli650d

  • New to the forum
  • *
  • Posts: 24
Re: Canon 650D [Status: Hello, world!]
« Reply #947 on: April 17, 2013, 07:04:15 PM »
Hello, why to have no version ml with the functions which do not walk to block  it would allow all to practice and it could wait
Eos m , Eos 70d canon 18-135 STM :canon 50mm f1.8 : tamron  SP 70-300 f4/5.6 VC : SD eye-fi 4Go/Sandisk extreme pro 95mb/s 8Go:flash yongnuo YN565EX / YN560 II: tube extention macro 31;21;13mm : tamron SP 90mm DI f2.8:sigma 17-50 ex f2.8: efm 22mm...70D.111A

Phillips321

  • New to the forum
  • *
  • Posts: 18
Re: Canon 650D [Status: Hello, world!]
« Reply #948 on: April 17, 2013, 07:07:48 PM »
Hello, why to have no version ml with the functions which do not walk to block  it would allow all to practice and it could wait

I think Oli is requesting a version of ML with the buggy parts disabled so that other less buggy areas can be tested(played with).

I presume the extra effort required to do this should just go towards fixing the bugs?

loplo

  • New to the forum
  • *
  • Posts: 36
Re: Canon 650D [Status: Hello, world!]
« Reply #949 on: April 17, 2013, 07:14:17 PM »
I think Oli has to use more punctuation marks.