Author Topic: Canon 650D [OLD]  (Read 1174444 times)

loplo

  • New to the forum
  • *
  • Posts: 36
Re: Re: Canon 650D [Status: Hello, world!]
« Reply #400 on: January 31, 2013, 09:49:34 PM »
Were you able to record longer before havibg ML on the SD card?

Also remove the card from the camera and check what Class your SD card is! To record HD fot longer periods you should have an Class 10 SD card!

Hope that i van be as much assistance as possible even without the Pre-Alpha1! :)
Yes I was able to shoot longer videos without ML.
Card is class 10 sandisk extreme with 45MBs. This shouldn't be a problem.

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
R: Canon 650D [Status: Hello, world!]
« Reply #401 on: January 31, 2013, 10:11:38 PM »
I assume video recording is still fine without ML?
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

1ricca

  • Freshman
  • **
  • Posts: 63
  • Level 50 - Power User
Re: Canon 650D [Status: Hello, world!]
« Reply #402 on: January 31, 2013, 10:57:44 PM »
Geez, I guess I really dodged a bullet. My install went perfect and is still working fantastically. Already a more fleshed out ML than my 5dMkIII Alpha in most ways. No errors or oops's anywhere.

I used Win7 Ultimate (custom compiled version though)
Sandisk Extreme III 8GB (my crappiest card)
Followed directions explicitly

I feel extra lucky because I would have used Mac OS X 10.8.2 on any other occasion but they were all in use and I used my dinky little Win7 laptop to do this install for once.

edit: I will post a detailed list of what's working and not by later tonight or tomorrow if I'm too busy.

ThibaultAnd

  • New to the forum
  • *
  • Posts: 3
Re: Canon 650D [Status: Hello, world!]
« Reply #403 on: February 01, 2013, 12:23:49 AM »
Hey nanomad !

I'm new here and I would like first to thank you for everything you did do get a ML port for the 650D.

Here are my review of the pre-Alpha version :

I have got the same issues but the main things works pretty well (I love HDR Video :) )
There is still a little bug (but very easily fixable) : When I rotate the screen, it gets mirrored (The writings are backwards !)
Here is an illustration of what I mean :



Keep up your good work !
ThibaultAnd.

loplo

  • New to the forum
  • *
  • Posts: 36
Re: Canon 650D [Status: Hello, world!]
« Reply #404 on: February 01, 2013, 08:51:37 AM »
I assume video recording is still fine without ML?

Yes indeed. I just filmed the unboxing of my new Nexus 4.

blade

  • Member
  • ***
  • Posts: 195
Re: Canon 650D [Status: Hello, world!]
« Reply #405 on: February 01, 2013, 09:15:18 AM »

There is still a little bug (but very easily fixable) : When I rotate the screen, it gets mirrored (The writings are backwards !)
ThibaultAnd.
[/quote]

I can confirm this bug, same here
eos400D :: eos650D  :: Sigma 18-200 :: Canon 100mm macro

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Canon 650D [Status: Hello, world!]
« Reply #406 on: February 01, 2013, 09:27:14 AM »
Thanks for the feedback everyone, and sorry for the troubles caused to our two fellow testers  :-[

I'll see if I can get a fix out ASAP (not today, probably during the weekend)
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

blade

  • Member
  • ***
  • Posts: 195
Re: Canon 650D [Status: Hello, world!]
« Reply #407 on: February 01, 2013, 09:34:26 AM »
What will be the next step? A closed pre alpha, or another semi open per alpha? Or is it alpha time already. Just wondering at what step of the development we are now. And how I can participate.
eos400D :: eos650D  :: Sigma 18-200 :: Canon 100mm macro

Beardymadness

  • New to the forum
  • *
  • Posts: 9
Re: Canon 650D [Status: Hello, world!]
« Reply #408 on: February 01, 2013, 12:01:46 PM »
Getting pretty excited. When do you think the next release might be?

THanks for all your hard work.

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Canon 650D [Status: Hello, world!]
« Reply #409 on: February 01, 2013, 12:40:58 PM »
Once we can ensure a safe boot
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

ProfessorX

  • New to the forum
  • *
  • Posts: 12
Re: Canon 650D [Status: Hello, world!]
« Reply #410 on: February 01, 2013, 04:08:48 PM »
Thanks for the feedback everyone, and sorry for the troubles caused to our two fellow testers  :-[

I'll see if I can get a fix out ASAP (not today, probably during the weekend)

No problem, these things happen from time to time. My camera is still very functional just married to the sdcard ;)

baga

  • Member
  • ***
  • Posts: 102
Re: Canon 650D [Status: Hello, world!]
« Reply #411 on: February 01, 2013, 04:20:20 PM »
Thanks for the feedback everyone, and sorry for the troubles caused to our two fellow testers  :-[
I'll see if I can get a fix out ASAP (not today, probably during the weekend)

Thanks, I'm lost without my camera ready to shoot on the coffee table. lol
Canon T4i/650d, Battery grip,  Xti/400d, 5 lenses, 2x converter, External flash hot shoe, Minolta XG7, power winder, Minolta X700, power winder grip, Sunpak 522 with dedicated sensors, dedicated hot shoe flash, 2x converter, 6 lenes and 4 older cameras

kovacm

  • New to the forum
  • *
  • Posts: 4
Re: Canon 650D [Status: Hello, world!]
« Reply #412 on: February 01, 2013, 06:25:48 PM »
thanks nanomad on hard work!

one question: will it be possible to set lower RAW resolution on 650D with ML? (e.g. like on stock Mart II...)

Canon Amateur

  • New to the forum
  • *
  • Posts: 36
Re: Canon 650D [Status: Hello, world!]
« Reply #413 on: February 01, 2013, 08:00:26 PM »
Thanks for the feedback everyone, and sorry for the troubles caused to our two fellow testers  :-[

I'll see if I can get a fix out ASAP (not today, probably during the weekend)
I'm already happy with the limited version of this pre-alpha release.
No issues on my side.
Take your time.

The mirrored text only appears when the screen is flipped to the max. A little turn in both directions and the screen is correct again.
Canon EOS 7D / Canon 1D Mark III / Lytro illum

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
R: Re: Canon 650D [Status: Hello, world!]
« Reply #414 on: February 01, 2013, 08:26:52 PM »
thanks nanomad on hard work!

one question: will it be possible to set lower RAW resolution on 650D with ML? (e.g. like on stock Mart II...)
This is known for causing bricked cameras.. So no
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

1ricca

  • Freshman
  • **
  • Posts: 63
  • Level 50 - Power User
Re: Canon 650D [Status: Hello, world!]
« Reply #415 on: February 01, 2013, 09:28:36 PM »
Still any chance of Kelvin WB in any of the alphas?

JannF

  • New to the forum
  • *
  • Posts: 14
Re: Canon 650D [Status: Hello, world!]
« Reply #416 on: February 01, 2013, 11:08:35 PM »
I am just impressed by the high bitrate modes, I recorded 30 minutes with 2,5x bitrate and it splitted the movies in 4GB parts and erverything is just working fine.

EDIT: Found a bug, sometimes the play feature hangs, so you can't switch photos, you have to reenter the play mode to make switching working again.

33black

  • New to the forum
  • *
  • Posts: 37
Re: Canon 650D [Status: Hello, world!]
« Reply #417 on: February 02, 2013, 06:41:26 AM »
Maaaaaaan.  Part of me is kiiiiiinda glad I missed out on the pre-alpha so my camera isn't messed up.

However, I'm insanely excited just to get my hands on a working version of ML.

Such a long wait....a long, long wait.

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
R: Canon 650D [Status: Hello, world!]
« Reply #418 on: February 03, 2013, 12:00:23 AM »
The upside down mode is working fine in my debug build which means it somehow relies on property change. Good to know
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

roterrion

  • New to the forum
  • *
  • Posts: 26
  • Magic Lantern for Video!
Re: Canon 650D [Status: Hello, world!]
« Reply #419 on: February 03, 2013, 02:00:28 PM »
i've never use ML before, so i dont know how exactly each feature works, but i think there's something not right in fps override. the outcome video have a bad image. i tried to record at 0.25 speed, it works, the timelapsing, but the image.. it  makes some sort of vertical lines.. however the intervalometer makes a great timelapse! :D :D :D i just dont know how to integrate it with the silent shooting feature, cos i really want to save shutter :P

let me give you the screenshot of fps override x0.25
[spoiler][/spoiler]


i also experiencing crashes while doing some fps override tests. and maybe some random(i dont really sure why it crash) errors.
i'll give you the logs.

CRASH00.LOG
[spoiler]ASSERT: !IS_ERROR(semErr)
at ./EekoApp/Color/WB/LV/LvWbAlgorWrap.c:522, task CLR_CALC
lv:1 mode:3


Magic Lantern version : v2.3.NEXT.2013Jan30.650D101
Mercurial changeset   : 9d92bca2f850+ (unified) tip
Built on 2013-01-30 09:02:24 by nanomad@magiclantern.fm.
Free Memory  : 254K + 3546K
[/spoiler]

CRASH01.LOG
[spoiler]ASSERT: !IS_ERROR(semErr)
at ./EekoApp/Color/WB/LV/LvWbAlgorWrap.c:522, task CLR_CALC
lv:1 mode:3


Magic Lantern version : v2.3.NEXT.2013Jan30.650D101
Mercurial changeset   : 9d92bca2f850+ (unified) tip
Built on 2013-01-30 09:02:24 by nanomad@magiclantern.fm.
Free Memory  : 254K + 3547K
[/spoiler]

CRASH02.LOG (timelapse fps override)
[spoiler]ASSERT: 0
at Graphics.c:3580, task CtrlSrv
lv:0 mode:3


Magic Lantern version : v2.3.NEXT.2013Jan30.650D101
Mercurial changeset   : 9d92bca2f850+ (unified) tip
Built on 2013-01-30 09:02:24 by nanomad@magiclantern.fm.
Free Memory  : 254K + 3589K
[/spoiler]

that's all crashes log i had from the first day you release the pre alpha. hope it helps something. :P

but overall, this is a great pre-alpha! keep up the good work! :D
EOS 650D, Sigma 18-250mm f3.5-6.3 HSM, Canon 40mm f2.8 STM, 50mm II f1.8, Transcend 16GB Class 10, Transcend 32GB UHS-I 300x
http://youtube.com/roterrion
http://vimeo.com/roterrion

Jankoc

  • New to the forum
  • *
  • Posts: 3
Re: Canon 650D [Status: Hello, world!]
« Reply #420 on: February 03, 2013, 03:25:13 PM »
Whats the status Nanomad? ::)

Any chance of a new release this weekend?

1%

  • Developer
  • Hero Member
  • *****
  • Posts: 5936
  • 600D/6D/50D/EOSM/7D
Re: Canon 650D [Status: Hello, world!]
« Reply #421 on: February 03, 2013, 04:59:25 PM »
Quote
one question: will it be possible to set lower RAW resolution on 650D with ML? (e.g. like on stock Mart II...)

It would probably work but one of them is hard to decode, the other has a purple cast and won't decode. I tested on 600d and this feature is meh an plays havoc on your worflow as lightroom and all won't import even the working ones.

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Canon 650D [Status: Hello, world!]
« Reply #422 on: February 03, 2013, 10:16:37 PM »
Thanks for the feedback everyone, and sorry for the troubles caused to our two fellow testers  :-[

I'll see if I can get a fix out ASAP (not today, probably during the weekend)

Cameras fixed,
Good job alex!
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Canon 650D [Status: Hello, world!]
« Reply #423 on: February 03, 2013, 10:26:19 PM »
Thanks for the feedback, I really apprecciate it  :D
I'll strike out what requires props and it's working fine in my development builds

General.
Info button in menu: Some of the feature info's bring up another feature in most ut the menus.

Testing of Movie menu.
Movie Restart:       Not working (not after 29.59 minutes and not after CBR bitrate to high stop)
Force LiveView:     Not Working Fixed
Shutter Lock:         Not Working
FPS ramping:         Not tested
 
Adv.Bracketing:        Not working. It takes pictures, but i can't get any exposure changes.

TimelapseRamping:  Not working.
Bulb Timer:              Not working. Can't find any Bulb setting on the 650D Working, read the manual :P Bulb is in M mode, decrease shutter speed until you get there
Mirror Lockup:          Partly Working. Should be fixed
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

baga

  • Member
  • ***
  • Posts: 102
Re: Canon 650D [Status: Hello, world!]
« Reply #424 on: February 03, 2013, 10:27:05 PM »
Cameras fixed
Good job alex!

Great job alex and nanomad and every one else that worked on it.
Canon T4i/650d, Battery grip,  Xti/400d, 5 lenses, 2x converter, External flash hot shoe, Minolta XG7, power winder, Minolta X700, power winder grip, Sunpak 522 with dedicated sensors, dedicated hot shoe flash, 2x converter, 6 lenes and 4 older cameras