Author Topic: Canon 650D [OLD]  (Read 1198819 times)

buckbullstallion

  • New to the forum
  • *
  • Posts: 27
Re: Canon 650D [Status: Hello, world!]
« Reply #650 on: March 12, 2013, 05:56:53 PM »
I've compiled myself a magiclantern.bin and autoexec.bin but I'm not sure how to compile the .fir or whatever else I need.

EDIT: I've tried doing "make" in the install/650D folder and it's giving errors that I don't quite understand.  I'll post a link to a log as soon as I can get it out of the VM.

EDIT: Is it acceptable to use 650D-bootfix.fir with a compiled autoexec.bin and ML?


EDIT:
I took the plunge and it worked out-of-the-box when I inserted my card and turned on. (I think I had set my camera's bootflag on a previous experiment).


where did you find all those files to compile?

jaapiyo

  • New to the forum
  • *
  • Posts: 2
Re: Canon 650D [Status: Hello, world!]
« Reply #651 on: March 12, 2013, 07:18:03 PM »
You can get the source over at https://bitbucket.org/hudson/magic-lantern/, info on compiling the source can be found on the forum :)
Canon 650d and Canon EF-S 17-55mm f/2.4 IS USM love'n

33black

  • New to the forum
  • *
  • Posts: 37
Re: Canon 650D [Status: Hello, world!]
« Reply #652 on: March 13, 2013, 06:53:13 AM »
I really want to try this pre-alpha.  I'm curious as to what's left to be tweaked in the public alpha.

So in my curiosity, I'm going to try and give this pre-alpha a compile.

Lucas_W

  • Freshman
  • **
  • Posts: 72
Re: Canon 650D [Status: Hello, world!]
« Reply #653 on: March 13, 2013, 07:05:13 AM »
If it's alright with Nanomad, I'd be happy to upload/share my own compiled autoexec.bin and post a guide on how to install it. Although I'm not sure how perfect my compilation and install method was. (Are the help docs meant to be missing?)
Canon EOS 650D + Kit lens, EF 50mm 1.8 and 52mm polariser.

APXmusic

  • New to the forum
  • *
  • Posts: 8
  • Kevin Crocker In Japan
Re: Canon 650D [Status: Hello, world!]
« Reply #654 on: March 13, 2013, 03:54:59 PM »
I would also like to try this but I don't want to screw my camera up. Should I just wait for the public alpha?

baga

  • Member
  • ***
  • Posts: 102
Re: Canon 650D [Status: Hello, world!]
« Reply #655 on: March 13, 2013, 06:58:08 PM »
If it's alright with Nanomad, I'd be happy to upload/share my own compiled autoexec.bin and post a guide on how to install it. Although I'm not sure how perfect my compilation and install method was. (Are the help docs meant to be missing?)

They weren't on either version I tested.  It's probably one of the last things they do.  They need all the data they collected from testers ,everything working and including new nightly builds others have compiled before they can write help files.

That's my guess anyway. 
Canon T4i/650d, Battery grip,  Xti/400d, 5 lenses, 2x converter, External flash hot shoe, Minolta XG7, power winder, Minolta X700, power winder grip, Sunpak 522 with dedicated sensors, dedicated hot shoe flash, 2x converter, 6 lenes and 4 older cameras

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Canon 650D [Status: Hello, world!]
« Reply #656 on: March 13, 2013, 11:48:46 PM »
Sorry guys I've literally been overloaded by work :'(
Although it's nice to see someone else took the initiative and compiled a bin
That being said I wouldn't use the autoexec method for the alphas mainly because it's safer if nothing is written on the camera in the first place
Also, and i don't know if your builds has props disabled or not. I don't remember what the source code in the repo has set
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

33black

  • New to the forum
  • *
  • Posts: 37
Re: Canon 650D [Status: Hello, world!]
« Reply #657 on: March 14, 2013, 01:17:06 AM »
it's all good.  we're all busy.  I've had a ton of auditions and such.  just looking for something to take my mind off of it.  :)


Lucas_W

  • Freshman
  • **
  • Posts: 72
Re: Canon 650D [Status: Hello, world!]
« Reply #658 on: March 14, 2013, 05:03:25 AM »
What's the alternative method to using the .bin?

Also, how would I know if I do have Props disabled?
Canon EOS 650D + Kit lens, EF 50mm 1.8 and 52mm polariser.

tk-germany

  • New to the forum
  • *
  • Posts: 4
Re: Canon 650D [Status: Hello, world!]
« Reply #659 on: March 14, 2013, 11:23:38 AM »
Hey @All,
looks were coming forward step by step... i'm sure there lot of people out there cant await to try it out. so maybe someone could upload compiled binfiles... sure its alpha, sure its not stable, but for compilation-noobs it would be a realy big help, to be also able, to test it out :)

Thanks a lot for your hard work,
regards, TK

baga

  • Member
  • ***
  • Posts: 102
Re: Canon 650D [Status: Hello, world!]
« Reply #660 on: March 14, 2013, 02:01:46 PM »
Hey @All,
looks were coming forward step by step... i'm sure there lot of people out there cant await to try it out. so maybe someone could upload compiled binfiles... sure its alpha, sure its not stable, but for compilation-noobs it would be a realy big help, to be also able, to test it out :)

Thanks a lot for your hard work,
regards, TK

The real Alpha will be out shortly I'm sure, just sit tight.  The last pre-alpha was by invite only and that testing is pretty much done.  When they shortly they mean it.    If you've read this whole thread you know the last thing you want to do is keep asking.
Canon T4i/650d, Battery grip,  Xti/400d, 5 lenses, 2x converter, External flash hot shoe, Minolta XG7, power winder, Minolta X700, power winder grip, Sunpak 522 with dedicated sensors, dedicated hot shoe flash, 2x converter, 6 lenes and 4 older cameras

tk-germany

  • New to the forum
  • *
  • Posts: 4
Re: Canon 650D [Status: Hello, world!]
« Reply #661 on: March 14, 2013, 02:09:32 PM »
Hi Baga,

as you can see, im within this thread from the beginning, and be sure i read the whole thread "a thousand times" in hope of have overseen the post, where some binaries are hidden :)

Sure im also anoyed of the people asking for a release... that was also not the target of my question :)
Just saw that some guys got it compiled by themself and hoped that they could drop a bin- anywhere, that does not collide with the patience for a final stable version...

Thanks a lot,
TK

baga

  • Member
  • ***
  • Posts: 102
Re: Canon 650D [Status: Hello, world!]
« Reply #662 on: March 14, 2013, 02:16:25 PM »
I would also like to try this but I don't want to screw my camera up. Should I just wait for the public alpha?

Yes wait, it will be out soon.  There are somethings working fine in this pre-alpha others aren't there at all and even more that only work partially and shouldn't be used because they can damage your camera.  The next version will be out soon.
Canon T4i/650d, Battery grip,  Xti/400d, 5 lenses, 2x converter, External flash hot shoe, Minolta XG7, power winder, Minolta X700, power winder grip, Sunpak 522 with dedicated sensors, dedicated hot shoe flash, 2x converter, 6 lenes and 4 older cameras

baga

  • Member
  • ***
  • Posts: 102
Re: Canon 650D [Status: Hello, world!]
« Reply #663 on: March 14, 2013, 03:09:45 PM »
Hi Baga,

as you can see, im within this thread from the beginning, and be sure i read the whole thread "a thousand times" in hope of have overseen the post, where some binaries are hidden :)

Sure im also anoyed of the people asking for a release... that was also not the target of my question :)
Just saw that some guys got it compiled by themself and hoped that they could drop a bin- anywhere, that does not collide with the patience for a final stable version...

Thanks a lot,
TK

That's even worse, you definitely don't want to put those in your camera.  You really need a good understanding of not only how ML works, how it's programmed and how to write program your self.   Taking a pre-alpha that is not completely functioning and potentially damaging and then putting an untested or approved bin on top of it, not a good combination.  I have both pre-alphas and have had my camera locked up for 3 days with the 1st one.   Everything is working good for me including ML now.   
Believe me I'm as anxious as you and have wanted to test those bins but not on this pre-alpha.  I would bet that those new bins aren't in the nightly download section because no one wants to risk bricking some one else's camera.
Really the next release is real close.
Canon T4i/650d, Battery grip,  Xti/400d, 5 lenses, 2x converter, External flash hot shoe, Minolta XG7, power winder, Minolta X700, power winder grip, Sunpak 522 with dedicated sensors, dedicated hot shoe flash, 2x converter, 6 lenes and 4 older cameras

nanomad

  • Administrator
  • Hero Member
  • *****
  • Posts: 2918
  • All your websites are belong to us
Re: Canon 650D [Status: Hello, world!]
« Reply #664 on: March 14, 2013, 08:48:36 PM »
I would bet that those new bins aren't in the nightly download section because no one wants to risk bricking some one else's camera.
Exactly. Given how the pre alpha went I don't feel like publishing anything when I know I can't be there on time if something goes wrong
EOS 1100D | EOS 650 (No, I didn't forget the D) | Ye Olde Canon EF Lenses ('87): 50 f/1.8 - 28 f/2.8 - 70-210 f/4 | EF-S 18-55 f/3.5-5.6 | Metz 36 AF-5

APXmusic

  • New to the forum
  • *
  • Posts: 8
  • Kevin Crocker In Japan
Re: Canon 650D [Status: Hello, world!]
« Reply #665 on: March 15, 2013, 03:32:38 AM »
So the T4i's normal videos are around 50mbps. In your testing experience, how high of a stable bitrate are you guys able to achieve with the hack?

philharmonie

  • New to the forum
  • *
  • Posts: 4
Re: Canon 650D [Status: Hello, world!]
« Reply #666 on: March 15, 2013, 06:26:05 AM »
I know that the question is hated, but shouldn't ML be there a week ago?
Is there a date?

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12564
Re: Canon 650D [Status: Hello, world!]
« Reply #667 on: March 15, 2013, 07:40:08 AM »
There is no planned release date for anything. ML is a hobby project for us, we do it in our spare time.

Sometimes we have more time, sometimes less.

Is it clear now?

Maddoxfotos

  • New to the forum
  • *
  • Posts: 15
Re: Canon 650D [Status: Hello, world!]
« Reply #668 on: March 15, 2013, 07:51:47 AM »
Idk why this message board is flooded with dumb question. It's should be just for the developers and testers. More you ask longer it take! I don't say much bc I'm patient but I don't like that the ppl that are putting in work to be upset. Let them get it done when it gets done!

loplo

  • New to the forum
  • *
  • Posts: 36
Re: Canon 650D [Status: Hello, world!]
« Reply #669 on: March 15, 2013, 09:36:33 AM »
In my opinion the development threads should be open for posting only for the developers and the testers. The others/curious people should open their own threads and not stress the team. My two cents.

Lucas_W

  • Freshman
  • **
  • Posts: 72
Re: Canon 650D [Status: Hello, world!]
« Reply #670 on: March 15, 2013, 10:12:30 AM »
You'll just end up with a load of empty/small threads.

@APXMusic, I tested then and I got up to 2.4x and any-more than that it stopped recording. This is with no HDR-video and with Global Draw in Live-view off. I did a benchmark test on my card and the camera said my card could do 40.9 MB/s (Or is it Mb/s? I forget). If you say that the standard is 50 megabits per second then I can film at 120 megabits per second.
Canon EOS 650D + Kit lens, EF 50mm 1.8 and 52mm polariser.

philharmonie

  • New to the forum
  • *
  • Posts: 4
Re: Canon 650D [Status: Hello, world!]
« Reply #671 on: March 15, 2013, 01:48:29 PM »
There is no planned release date for anything. ML is a hobby project for us, we do it in our spare time.

Sometimes we have more time, sometimes less.

Is it clear now?

Sorry for that - but its clear now - i didnt know, that ML is a hobby project.
I changed my 600D to a 650D and im missing ML so much =)

loplo

  • New to the forum
  • *
  • Posts: 36
Re: Canon 650D [Status: Hello, world!]
« Reply #672 on: March 15, 2013, 02:19:08 PM »
Lol, you've thought that someone is paying them to work and give us ml for free? You gotta read more about ml and find out things about the project.

baga

  • Member
  • ***
  • Posts: 102
Re: Canon 650D [Status: Hello, world!]
« Reply #673 on: March 15, 2013, 06:13:04 PM »
In my opinion the development threads should be open for posting only for the developers and the testers. The others/curious people should open their own threads and not stress the team. My two cents.
  At first I agreed completely with your thoughts.  After some thought myself where would the testers come from.  Non developers or testers sometimes reading our posts can ask a good question or have an interesting idea because they are just following. 
I was guilty of those post in the beginning.  I think everyone is starting to help the developers by assisting people under stand the process. 

Just my thought's.  ;D
Canon T4i/650d, Battery grip,  Xti/400d, 5 lenses, 2x converter, External flash hot shoe, Minolta XG7, power winder, Minolta X700, power winder grip, Sunpak 522 with dedicated sensors, dedicated hot shoe flash, 2x converter, 6 lenes and 4 older cameras

Chuck J

  • New to the forum
  • *
  • Posts: 16
Re: Canon 650D [Status: Hello, world!]
« Reply #674 on: March 16, 2013, 03:58:50 AM »
Canon should pay these guys. Magic Lantern generates as much interest in canon products as canon's own marketing, maybe more.