Author Topic: Nightly Builds - try the very latest stuff here (Read 1168920 times)

Canon eos m · « **Reply #675 on:** May 03, 2014, 07:05:12 PM »

Great effort!

Static · « **Reply #676 on:** May 08, 2014, 11:59:14 AM »

Hello guys!

Does someone have already experience with the 2014-05-07 00:01:01 +0200 Build on 5D3.123 ? Im very affraid of killing my camera with the nightly build.
Is the new FFMPEG support already included ?

Greetings

Andrzej · « **Reply #677 on:** May 08, 2014, 10:00:43 PM »

Hello, cane somebody write what to do, to speed up ML reactions to my settings? Is there any way?
When i change shuttler value, it takes about 3 sec. to see my adjustment. Exposure adjustment dead slow also

I remember some previous builds were faster, don't remember exactly with ones.
Iam referring to NB 5dm3 113

dmilligan · « **Reply #678 on:** May 08, 2014, 11:27:48 PM »

you need to be way more specific, perhaps post a video of the problem, your description is way to vague

Walter Schulz · « **Reply #679 on:** May 08, 2014, 11:35:36 PM »

Delete SETTINGS contents, copy files over from your nightly download. Restart cam and try again without loading any additional modules.
Results?

AsherVast · « **Reply #680 on:** May 09, 2014, 12:30:29 AM »

What's the best way to apply the nightly build over a previously working build on the card without having to do the whole process from scratch? Basically, I like the nightly build that I have from months ago but I would like to try newer version without having to do whole prep process from step 1. Any tips?

dmilligan · « **Reply #681 on:** May 09, 2014, 01:35:37 AM »

Backup everything on the card, then replace all the old files with the new ones, done

kichetof · « **Reply #682 on:** May 09, 2014, 10:00:02 AM »

Quote from: dmilligan on May 09, 2014, 01:35:37 AM

then replace all the old files with the new ones

Personally I prefer to delete the ML folder, *.fir file and autoexec.bin and after I copy the new files from nightly

Andrzej · « **Reply #683 on:** May 09, 2014, 04:41:33 PM »

Hi. Deleting files in the settings folder did't work. ML still slow

Shuttler reaction is ok when magic zoom is off. Exposure compensation values still slow

2-3sec delay.

Andrzej · « **Reply #684 on:** May 09, 2014, 08:13:41 PM »

Also, REC indicator/ remaining time go crazy after parsing 2gb. I did IPB and ALL-I comparison to verify that.
I'am using Nightly2014May08 build

dmilligan · « **Reply #685 on:** May 09, 2014, 09:59:02 PM »

Quote from: Andrzej on May 09, 2014, 04:41:33 PM

Shuttler reaction is ok when magic zoom is off. Exposure compensation values still slow 2-3sec delay.

It's just the display that is slow, the shutter speed actually changes quickly (I couldn't tell from your video, but I tried it on my camera and that is the case, you can change the shutter speed quickly, the readout on the display just takes longer to refresh with MZ or some other CPU heavy function enabled, which makes perfect sense, more CPU overhead means less time to update stuff like the bars).

Andrzej · « **Reply #686 on:** May 10, 2014, 10:14:27 AM »

Thak you for reply

Yes, that is the case.
Is readout speed can be increased ? At least for the exposure compensation ?
Maybe some code optymisation will help ? I dont think that exp. comp. is a CPU heavy function.

dmilligan · « **Reply #687 on:** May 10, 2014, 02:12:06 PM »

Quote from: Andrzej on May 10, 2014, 10:14:27 AM

Maybe some code optymisation will help ?

probably, feel free to get started

jgerstel · « **Reply #688 on:** May 12, 2014, 05:54:58 PM »

Quote from: Static on May 08, 2014, 11:59:14 AM

Hello guys!

Does someone have already experience with the 2014-05-07 00:01:01 +0200 Build on 5D3.123 ? Im very affraid of killing my camera with the nightly build.
Is the new FFMPEG support already included ?

Greetings

Hi installed this release on 5D3 and tested with both raw and mlv. It is not stable yet, sometimes it hangs when IO rate is too high, but it will not kill your camera.

The ffmpeg I did not check, I use MLV Mystic for mac

MONTAZ · « **Reply #689 on:** May 13, 2014, 10:21:48 AM »

I installed with the firmware 1.2.3. on 5D MKIII And no importing concerns. Thank you

silvertonesx24 · « **Reply #690 on:** May 14, 2014, 12:08:00 AM »

Still an HDMI tearing issue, as of May 12th build. When using an HDMI monitor, image tearing will appear. 5DII.

sleepinghouse · « **Reply #691 on:** May 18, 2014, 04:17:01 PM »

While shooting yesterday, these appeared on the top and bottom of my screen:
"Scanning Modules..."
"Save configs"

When I went to save configs and clicked it, 2 more save configs appeared. I rebooted my camera a few times and left it off and it finally went away. This was on the Nightly 2014 May 14 5D2212 Build.

Anyone else have this issue?

a1ex · « **Reply #692 on:** May 18, 2014, 08:58:58 PM »

Turn off "Show console" from the Debug menu.

groundlessfears · « **Reply #693 on:** May 19, 2014, 07:45:32 PM »

what happened to 550D builds.?

budafilms · « **Reply #694 on:** May 19, 2014, 07:46:52 PM »

Quote from: groundlessfears on May 19, 2014, 07:45:32 PM

what happened to 550D builds.?

http://www.magiclantern.fm/forum/index.php?topic=11080.0

dmilligan · « **Reply #695 on:** May 19, 2014, 10:08:43 PM »

Quote from: groundlessfears on May 19, 2014, 07:45:32 PM

what happened to 550D builds.?

actually the builds were broken intentionally by this commit:
https://bitbucket.org/hudson/magic-lantern/commits/3650ca1dda7f448a5dc11f803aeff6bd8099cfcf/

sirquack · « **Reply #696 on:** May 21, 2014, 12:29:30 AM »

Anyone else having issues after installing the Canon 6D firmware update 114? I have tried several of the most recent nightly builds for the 6D and all of them end up once I try to update the firmware for ML just go to a flashing red light on the back of the camera. The light is the one right next to the memory door on the right back side of the camera. So it is not completing the install of ML and this has been the case with the old working version from 3/29/14 for nightly builds and all three of the most recent builds. I have come to love the extra stuff ML does, and I will got back to Canon's firmware 113 if I can't get ML working with 114. I just want to make sure whether it is just me, or if others are having these issues.

sirquack · « **Reply #697 on:** May 21, 2014, 12:38:27 AM »

I guess I found the answer to my own question. The download does show the extension of 113 so I am guessing a compatible version has not yet been created for 114. Good thing I backed up my 113 firmware before the upgrade. I am definitely wiling to stay there until someone creates a ML version for 114.

pranjal38 · « **Reply #698 on:** May 22, 2014, 12:08:22 PM »

What happened to 600d builds...why it is showing "This build failed"

?

dmilligan · « **Reply #699 on:** May 22, 2014, 12:51:53 PM »

Quote from: pranjal38 on May 22, 2014, 12:08:22 PM

What happened to 600d builds...why it is showing "This build failed" ?

3 posts up:

Quote from: dmilligan on May 19, 2014, 10:08:43 PM

actually the builds were broken intentionally by this commit:
https://bitbucket.org/hudson/magic-lantern/commits/3650ca1dda7f448a5dc11f803aeff6bd8099cfcf/

News:

Author Topic: Nightly Builds - try the very latest stuff here (Read 1168920 times)