Author Topic: Magic Lantern for 5D Mark III - Alpha 3 (1.1.3) (Read 826660 times)

Francyz · « **Reply #425 on:** November 22, 2012, 03:39:03 PM »

Everyone is waiting for startup and adjustment of bitrate. I especially!

a1ex · « **Reply #426 on:** November 22, 2012, 03:47:01 PM »

Sure, after fixing all major bugs.

mnteddy · « **Reply #427 on:** November 22, 2012, 03:47:42 PM »

Just because so many people keep asking for auto-boot to be added, I thought I'd post a screen shot of my custom menu. Having firmware as my first option makes it extremely fast to boot into ML. And I think A1ex has said this before, to save power, just switch to photo mode in between shots rather than a full power down.

I do a lot of run and gun commercial shooting, and these are my most used settings:

Stedda · « **Reply #428 on:** November 22, 2012, 04:36:45 PM »

I did the same thing, takes no time at all.

swinxx · « **Reply #429 on:** November 22, 2012, 07:46:00 PM »

- 16:9 bars for anamorphic preview

what is this for.. ?
i am a little confused.. cause anamorph has nothing to do with 16:9?

greets. swinxx

JohnN · « **Reply #430 on:** November 22, 2012, 09:21:33 PM »

Sadly can't load mine since alpha 3 - just down to CF card though - can someone confirm that a "bad" CF card will stop loading as I'm not 100% sure.

a1ex · « **Reply #431 on:** November 22, 2012, 09:23:44 PM »

Correct, you need a good card.

Arthur Rambo · « **Reply #432 on:** November 23, 2012, 12:38:17 AM »

mnteddy : it seems you like your LCD very bright

stir fry a lot · « **Reply #433 on:** November 23, 2012, 06:57:18 AM »

I could have sworn there was a 1/47 ss option earlier today but it is now jumping from 1/42 (red) to 1/60 (blue) with nothing in between. I've been going through my settings to see if I could reverse/replicate this but I'm striking out at the moment.

hjfilmspeed · « **Reply #434 on:** November 23, 2012, 04:45:47 PM »

is the bit rate feature something that will work with the alpha style boot that runs off the card? I love booting ML off the card. I know its not 100% safe but its deffintly less scary for noobs like me a ha ha

nanomad · « **Reply #435 on:** November 23, 2012, 05:06:27 PM »

No bumping your own posts

hjfilmspeed · « **Reply #436 on:** November 23, 2012, 06:07:45 PM »

Quote from: nanomad on November 23, 2012, 05:06:27 PM

No bumping your own posts

Not sure if that was for me but i usally make a billion mistakes in my posts or word things poorly so wanted to correct them. grammer is not my strong point. deffinetly was not trying to bump my post.

nanomad · « **Reply #437 on:** November 23, 2012, 07:06:01 PM »

You can use the edit button

JohnN · « **Reply #438 on:** November 23, 2012, 07:40:03 PM »

Well, I saw this card in Amazon's Black Lightning deals - Transcend 32 GB 400x Compact Flash - I seem to recall this one working so have ordered.

Director · « **Reply #439 on:** November 24, 2012, 10:47:31 AM »

Alex

The previous time invalidated you to provide me with information about this request did not provide me with information and now asks you if you do not see my question from first time

Can you tell me what are the settings that you used in the film "Bodie"

Thanks

nanomad · « **Reply #440 on:** November 24, 2012, 01:40:23 PM »

For the last time, ask the bloody producer, not alex (who is not affiliated in any way with the movie)

daveRe78 · « **Reply #441 on:** November 27, 2012, 10:19:32 PM »

Hello,

Freshman here, just wondering if there is any ETA for the movie restart mode on the Mark iii as that would be very useful to me.

Keep up the good work, definitely going to support you guys.

a1ex · « **Reply #442 on:** November 27, 2012, 10:20:24 PM »

The 30-minute limit is a legal one, so I don't want to remove it

manniac · « **Reply #443 on:** November 27, 2012, 11:30:46 PM »

Can we expect the analog/digital gain options to be included in the next alpha? They were actually one of the main reasons I used ML on my Mark II, because without, audio recordings are terribly noisy, and with, the audio sounds much better..

a1ex · « **Reply #444 on:** November 27, 2012, 11:49:27 PM »

No, the audio chip is unknown.

manniac · « **Reply #445 on:** November 28, 2012, 03:13:47 AM »

Oh :-O Is this a thing that will be solved later or is the audio chip a hard one (and therefore those features probably not be included at all)?

nanomad · « **Reply #446 on:** November 28, 2012, 10:53:16 AM »

We need high res pictures of the inside of the camera.... I doubt there's someone willing to take apart his for 'science'

itsskin · « **Reply #447 on:** November 28, 2012, 11:04:45 AM »

Seems you can ask this guy:

http://www.eoshd.com/content/7727/james-miller-removes-optical-low-pass-filter-from-5d-mark-iii-for-resolution-increase
http://www.eoshd.com/content/7813/how-i-opened-my-5d-mark-iii-and-why-you-have-to-be-crazy-to-do-it

feureau · « **Reply #448 on:** November 28, 2012, 06:13:50 PM »

Quote from: nanomad on November 28, 2012, 10:53:16 AM

We need high res pictures of the inside of the camera.... I doubt there's someone willing to take apart his for 'science'

I dunno what you're looking for looks like, but here's some pics of the insides of a mark III:

http://www.lensrentals.com/blog/2012/04/5d-iii-strip-tease

In case it's in there somewhere...

a1ex · « **Reply #449 on:** November 28, 2012, 06:37:20 PM »

We already have hi-res PCB pics at http://www.pbase.com/rcicala/magiclantern (thanks Roger!)

I believe the chip is the bottom-left one in the second pic, but... good luck reading what's on it

News:

Author Topic: Magic Lantern for 5D Mark III - Alpha 3 (1.1.3) (Read 826660 times)