Having weird issue, I hope someone can tell me if it has anything to do with ML and if there is a way to solve it (with ML or otherwise). I have CF card (bootable with ML on it) and a SD card in the camera. Since I have 2 cameras and they have different firmware (1.1.3 and 1.2.3, everything else is same, CF+SD and same problem) I do not want to mix the CF cards so I tend not to get them out of the camera at all and since the SD ones are bigger and cheaper I want to by default record data on SD card.
Whatever I do, after turning on the camera, it selects CF card as a default one
.
Record func.: STANDARD
Record/play : SD
or
Record func.: AUTO SWITCH CARD
Record/play : SD
it is SD until I reboot camera (off/on), after that it boots, display show for a second that SD is selected and then moves the selection to CF. If I go to menu and move to SD it will record on SD till reboot, then again it will be CF.
A friend told me "last card you add to camera is default" so I tried then all the possible combinations
- boot camera with only cf, shut down, add sd, boot
- boot camera with only sd, shut down, add cf, boot
- shut down camera, remove both, add cf then sd turn on
- shut down camera, remove both, add sd then cf turn on
- any other idea I had..
everytime it either boots with CF already selected or it turns on with SD selected and then changes the selection to CF
any ideas how to make the SD default?
