Author Topic: 3K/UHD 5D2 Raw development and Other Digic IV Cams  (Read 254939 times)

reddeercity

  • Contributor
  • Hero Member
  • *****
  • Posts: 2267
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1325 on: August 28, 2020, 03:10:42 AM »
Ok Solved my download tracking issue , I started a new Bitbucket Repository
https://bitbucket.org/reddeercity/crop_rec_5d2_50d/src
There's no ml source files yet (i guess i could have clone from Mercurial repos before there where deleted  :( )
But for now i have all the Crop_Rec Builds there , In the download area so i can see the downloads as before
and in time i will unload my source , when I figure that part out .

I've undated the first post of the this thread with the new updated links .

Thanks for the suggestions everyone .
 

T123

  • New to the forum
  • *
  • Posts: 7
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1326 on: August 28, 2020, 06:58:23 AM »

testing, testing, testing,

Why my previous post are still waiting for review, not visible yet?

names_are_hard

  • Contributor
  • Senior
  • *****
  • Posts: 280
  • 200D idiot
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1327 on: August 28, 2020, 07:26:44 PM »
That's a Git repo, so you couldn't have cloned from any Mercurial repo.  You'll have to use git if you want to put code in there.  I have a git copy of the old ML repo, you could clone that - but you'll still have to use git to work with it.

T123

  • New to the forum
  • *
  • Posts: 7
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1328 on: August 31, 2020, 10:20:58 PM »

@reddeercity

Thank you for your hard work.
My previous posts have been approved, but the attachement is expired.
So i attached again the link. Here is my feedbacks to the build-2020Aug16


1. With crop mode on, the 3760x1080 files,
-shows red pink bar on the right end,
-tiny pink line at the bottom.
-black object/dark shadow with vertical lines. Black colour with colour cast.

See attached file, extracted from MLVFS
M20-1619_000005.dng 3760x1080


2. With crop mode on, tiny pink line at the bottom.
---See attached file, fifth frame from various resolution videos.
M20-1620_000005.dng 3520x1080
M20-1621_000005.dng 3200x1080
M20-1622_000005.dng 3008x1080
M20-1623_000005.dng 2880x1080
M20-1624_000005.dng 2560x1080
M20-1625_000005.dng 2240x1080


3. with crop mode OFF, no colour cast/ colour lines.
M20-1617_000005.dng 1584x892 no crop
M20-1618_000005.dng 2000x1078 crop


Is the extra 2pixels caused the bottom colour line?

Here are the download link for the dng files.
https://we.tl/t-Qftxyjao2D

reddeercity

  • Contributor
  • Hero Member
  • *****
  • Posts: 2267
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1329 on: September 04, 2020, 04:45:42 AM »
@ t123, try a different  Cdng extraction software like MLV App.
The color vertical line are a know problem even on the 5D2 , just wait a few minutes or go thought the menu
then back to crop_rec liveview and the the lines will be gone .
The is just a crop_rec issue and not a problem with normal raw recording , e.g. 3x3 or crop_mode (5xzoom)
This is very Bleeding Edge for the 50D since it never had video in the first place , so little issue/problems need some work around
 

reddeercity

  • Contributor
  • Hero Member
  • *****
  • Posts: 2267
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1330 on: September 04, 2020, 04:51:29 AM »
Updated the first post of this thread with the 50D Crop_Rec build , since there no big issue being reported
I can consider it to be safe for general user's now .
https://www.magiclantern.fm/forum/index.php?topic=19336.msg182476#msg182476

zcream

  • Freshman
  • **
  • Posts: 50
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1331 on: September 07, 2020, 04:59:46 PM »
Any chance of 2560x1440 ? Its less than 3.7k and its standard 1440p, hence more usable with other video footage.

Sent from my Redmi 4A using Tapatalk


reddeercity

  • Contributor
  • Hero Member
  • *****
  • Posts: 2267
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1332 on: September 08, 2020, 02:14:25 AM »
Any chance of 2560x1440 ? Its less than 3.7k ....
I have 3200x1330 @ 23.976 , but the problem I'm having is the adtg hooks (adtg[1]1172 & adtg[1]1178) are not enabling (this is needed for any height beyond 1080)
I'm working on it and a possible word around .

reddeercity

  • Contributor
  • Hero Member
  • *****
  • Posts: 2267
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1333 on: September 08, 2020, 02:33:10 AM »
50d_3x1_crop_rec_4118x720_24p_9-7-2020-6.04pm_adtg_gui.zip

On the 50D I'm also having problems with the cmos hooks in 3x3 (there work Ok in 5xZoom),
I have a 3x1 4k & 48p preset but there crash the camera (lockup neededs a battery pull)

So I coded the 3x1 4k preset in to the adtg_gui module , just like the 3.7k from before .
So it will work the same , go in to the advance menu & enable "Digic Reg" first , refresh liveview
then go back the advanced adtg_gui menu and enable the 3k(50D) preset (I haven't changed the name in the menu)
then press the play button once it should then give you a scambled HD Liveview & or a frozen liveview , make sure you are in ML Black & white low res preview
I haven't coded the preview reg in to it , but you can put them in yourself .
Select the "Preview Regs Only" tab and input the reg in the image below , this will un-freeze liveview at standby but still frozen when you record raw video .



To process the 3x1 files use MLV App and make sure you enable the vertical 3x to get the full height (4118x2160)
and you may have to adjust the black level down to 105 in 10bit , i still need to adjust the regs
Give it a try , i'll try and update this later on .

I'm also looking in to a new camera for myself , maybe a 5d3 but i'm leaning towards a 5d4 or EOS R or R6
I do feel the pull toward the 5D4 as the basic ML has being ported (stubs mainly) but needs alot of work , switch I don't mind helping of course  :D
and the EOS-R with 4k 10bit log HDMI .

So if i do get new camera the update here maybe slow here , but as long as i have my D4/5D2 & 50D I"ll keep working to advance them to the best they can  ;D

d1c1

  • Just arrived
  • *
  • Posts: 1
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1334 on: September 15, 2020, 09:50:30 PM »
i'm getting these vertical lines in my crop rec videos


Milk and Coffee

  • Member
  • ***
  • Posts: 101
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1335 on: September 18, 2020, 04:11:14 AM »
I tested the new mlv_rec module "1880_3x3-2152_5xZoom-5d2+50d-support__7-5-2020-5.59pm-mlv_rec.zip" with the latest "crop_rec-5632x3124_3.8fps-5D2-eXperimental.9.42pm.2020Jan05.5D2212.zip" build. I'm loving the new 3x3 resolution!

mlv_play isn't working and causes no modules to load.

Any way to fix this easily?

Thanks again for your continued development!

Is there a way to get the 1880 res in the 5D2 nightly build?
Gear: Canon 5D Mark II

yourboylloyd

  • Senior
  • ****
  • Posts: 298
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1336 on: September 18, 2020, 05:32:44 AM »

mlv_play isn't working and causes no modules to load.


mlv_play hasn't worked in ages on experimental builds. Everyone has this problem. There isn't much that can be done unless you can convince someone to develop mlv_play more.
Join the ML discord! https://discord.gg/H7h6rfq

reddeercity

  • Contributor
  • Hero Member
  • *****
  • Posts: 2267
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1337 on: September 18, 2020, 08:14:14 AM »
mlv_play isn't working and causes no modules to load.
Any way to fix this easily?
Yes,  here you go try this . mlv_play_9-17-20_11.29pm.zip
It should let you load your other modules now but i having a decoding error from "raw_twk module" now
the images are are all snow/noise , in 10 & 12bit but 14bit works a little better , I'll have to go thought the raw_twk module and see where the problem is at .

Should have some time here in the next few days


Is there a way to get the 1880 res in the 5D2 nightly build?
Not right now , need to wait until the source code with all the branches are updated on the new web platform .

reddeercity

  • Contributor
  • Hero Member
  • *****
  • Posts: 2267
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1338 on: September 20, 2020, 02:31:24 AM »
Did a quick video for the adtg_gui crop_rec 3x1 4k on the 50D. , I unloaded the file as prores 4444 5016x1832 but it seem to only play up to 4k , maybe latter there will be the 5k version


This gave me a opportunity to push the 5D2 to it limit for Mpixel/s readout , So in 1x3 1672x1832 @ 23.976 is the limit .
1672 x 1832 x 24 /8= 91.89 Mpixel/s , in theory the max read out is 24Mhz x 4 channel readout = 98 Mpixel/s
So i haven't been able to reach the max yet , or this may be it .
I'll explain , if you actually take in account the black boarder offset , horizontal offset 160 pixels & vertical offset 52 pixels
If you add the offset you get (1672+160)=1832 (1832+52)=1884 , 1832 x 1884 x 24/8 = 103.5 Mpixel/s  :D
So when we do raw size for raw video , should we take in account the offset or is this not read ?
Anyway I thought this was of interest .

Also as I'm having problem getting 1x3 to work in the crop_rec module on the 5D2 , so to please all the 5D2 user's , I'll give you a little treat  ;)
I'll post a video plus instructions on how to get 1x3 with the adtg_gui module .
Not sure if 1x3  will ever be coded to crop_rec so this will be the next best thing , stay tune  .

Igor_Braun

  • Member
  • ***
  • Posts: 120
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1339 on: September 22, 2020, 09:13:01 AM »
I'm exciting

dlprod

  • New to the forum
  • *
  • Posts: 25
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1340 on: September 24, 2020, 04:05:46 PM »
I can't wait!!

kpn

  • New to the forum
  • *
  • Posts: 5
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1341 on: September 25, 2020, 10:42:09 AM »
Absolutely amazing work reddeercity! Glad to see this old but great camera being pushed to it's limits.

I've just got 5Dmk2 a few weeks ago and I've been experimenting with these raw builds, most of it seems to work fine but for the heck of me I can't figure out how to enable 48p mode. It would be really useful cause I've just got a glidecam and that would be a perfect combo. I tried following the video guides, guess I'll try again, I know it should work. Looking forward for future releases!

reddeercity

  • Contributor
  • Hero Member
  • *****
  • Posts: 2267
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1342 on: September 29, 2020, 07:49:50 AM »
Ok here we go , 5k (1640x1842@23.976fps) 1x3 setup with the adtg_gui module  and yes it can take up to 15min to setup , if you get it to work on the first try (without a battery pull) you're dong good  :D
The audio is a little low , sorry  :-[ forgot to gain the audio up when i captured it to my hdmi aja captured card from my HV20 .
let my know if it's problem , I can always upload a new version with gained up audio .   


Milk and Coffee

  • Member
  • ***
  • Posts: 101
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1343 on: October 02, 2020, 06:02:54 AM »
This might be a stupid question, but is there a 3x1 (vertical stretch) anamorphic preset to use the full width of the sensor? Would this theoretically reduce aliasing and moire the same as 3x1 (horizontal stretch)?
Gear: Canon 5D Mark II

masc

  • Contributor
  • Hero Member
  • *****
  • Posts: 1677
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1344 on: October 02, 2020, 10:54:39 AM »
This might be a stupid question, but is there a 3x1 (vertical stretch) anamorphic preset to use the full width of the sensor?
No.
Would this theoretically reduce aliasing and moire the same as 3x1 (horizontal stretch)?
No. 3x1 horizontal stretch = 1x3. 5D2 does a lineskipping. As long as you just read each 3rd line, you'll get moiree. Reading all columns won't reduce that.
5D3.113 | EOSM.202

dlprod

  • New to the forum
  • *
  • Posts: 25
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1345 on: October 02, 2020, 11:32:39 AM »
Hi

Which specific 5D2 build is this for?

Thank you
Joseph

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7577
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1346 on: October 02, 2020, 11:38:52 AM »
Which specific 5D2 build is this for?

Context missing. What are you asking and whom?

dlprod

  • New to the forum
  • *
  • Posts: 25
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1347 on: October 02, 2020, 10:42:13 PM »
Sorry anyone who can answer regarding Reedeercity's adtg_gui module in the 5D mk2.  Which build is he using to do the adjustment?

reddeercity

  • Contributor
  • Hero Member
  • *****
  • Posts: 2267
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1348 on: October 03, 2020, 01:32:43 AM »
Sorry anyone who can answer regarding Reedeercity's adtg_gui module in the 5D mk2.  Which build is he using to do the adjustment?
adtg_gui module from any of my full builds , I think i use the dec31/19 but can't remember right now.

.....I can't figure out how to enable 48p mode.
It can be difficult yes , but what seem to work is start off in 3.5k centerd preset , then switch to the 48p preset .
seem to work ever time , if you couldn't get it in the first few tries then turn off crop_rec restart camera , enable crop_rec
try again . I'll post a video later , on how to enable 48p .

dlprod

  • New to the forum
  • *
  • Posts: 25
Re: 3K/UHD 5D2 Raw development and Other Digic IV Cams
« Reply #1349 on: October 03, 2020, 01:12:18 PM »
Thank you Reddeercity!