Author Topic: Canon 100D / SL1 (Read 677807 times)

Danne · « **Reply #1650 on:** May 19, 2019, 02:07:41 PM »

New upload:
https://www.magiclantern.fm/forum/index.php?topic=16040.msg208816#msg208816

- refresh preset routines refined

Finally had some 100D time on my hands. Changing presets is a hustle on this cam but I think I addressed the issue and should work much better now. The anamorphic mode could still need a menu button push but the other modes should apply regs better than before(almost impossible sometimes)

Danne · « **Reply #1651 on:** May 19, 2019, 06:17:28 PM »

Still some reg issues changing presets so I pushed yet another build. Link above updated.

Danne · « **Reply #1652 on:** May 21, 2019, 11:22:02 AM »

New upload:
https://www.magiclantern.fm/forum/index.php?topic=16040.msg208816#msg208816

- Rearranged menu presets, most useful comes first.
- Included set 25fps preset in crop mode sub menu

Todo: add 2.35:1 preset to other modes besides anamorphic

Danne · « **Reply #1653 on:** June 08, 2019, 08:36:41 AM »

dfort kindly updated pixel maps for the anamorphic mode for the 100D:
https://bitbucket.org/daniel_fort/ml-focus-pixels/downloads/

Put those map files inside Mlv App for activation.

Danne · « **Reply #1654 on:** June 08, 2019, 09:53:25 AM »

New upload:
https://www.magiclantern.fm/forum/index.php?topic=16040.msg208816#msg208816

- Enable autofocus while recording same as for eosm:

Issue description:
https://www.magiclantern.fm/forum/index.php?topic=3064.msg213120#msg213120

Set af on in small hack menu under RAW video tab

ebrc · « **Reply #1655 on:** June 18, 2019, 08:08:19 AM »

i tried the latest build, i ran the lua script and it seems ok,
but i can't record more than 1~2 sec, i guess my sd card is not overclocking,
memory patches are red for SD UHS and SDR104... i have a sandisk extreme pro 95 mbps

is there another information i should tell you?

Danne · « **Reply #1656 on:** June 18, 2019, 08:16:09 AM »

You could try some older sd_uhs implementation which includes activation from menu.

Danne · « **Reply #1657 on:** June 22, 2019, 08:54:52 PM »

New upload:
https://www.magiclantern.fm/forum/index.php?topic=16040.msg208816#msg208816

- Had a sd card which wouldn´t work at all with sd_uhs module so I took a dive to see if I could get it working. So it seems that some cards worked without SD_ReConfiguration(); but other didn´t so I put back parts of code that seems to affect this. This resulted in the sd_uhs patch working for that card again. Hopefully this means all reports about not having the direct patch working now working just as good as with the lua script versions.

Commit:
https://bitbucket.org/Dannephoto/magic-lantern/commits/ed816852c8926aeb5f24e4c1fbb2a1187a8b0b62

canneloni · « **Reply #1658 on:** June 26, 2019, 01:34:01 PM »

The newest upload works perfectly with my SD-Card

Thank you very much! The Anamorphic mode works fine as well, at least most of the time. Still have some problems with focus pixel, but I think I have to download dforts latest map files and install them into MLV App.

Danne · « **Reply #1659 on:** June 26, 2019, 01:47:32 PM »

Cool

Pixel maps don't work I think. Apply chroma smooth cs3x3. This works.

OlRivrRat · « **Reply #1660 on:** June 26, 2019, 04:53:49 PM »

@Canneloni

Might be helpful to let us know what SD that is ~

Danne · « **Reply #1661 on:** June 26, 2019, 05:32:06 PM »

Well, did you test yet OlRivrRat? What card are you using yourself? If you test run the lua cinema script and record in anamorphic 2.39:1 for the test.

dfort · « **Reply #1662 on:** June 26, 2019, 07:47:00 PM »

Quote from: Danne on June 26, 2019, 01:47:32 PM

Pixel maps don't work I think.

If you think they don't work, send me a short MLV file so I can check it out.

Danne · « **Reply #1663 on:** June 26, 2019, 08:49:00 PM »

Gotta take a look. Hm, now when I think of it. Didn't you fix maps for 100D a while ago? Memory failure.

OlRivrRat · « **Reply #1664 on:** June 27, 2019, 07:35:12 PM »

@ Danne

Don't get any 'Formal' notification that sd_uhs is running & Bench'Tests are inconsistent >

On 4 seperate BnchTsts Writes are from 42.1 - 60.9 ~

Used Latest 22Jun Build on SanDisk ExtremePro 95MB/s U3 C10

      1st BnchTst      2nd BnchTst       4th BnchTst

Write      47.8            42.1            47.2

Read      71.7            49.0            58.7

Write      60.9            45.8            50.2

Read      71.8            49.0            58.9

Then Switched back to 8May Build to compare as that is when I had last tested >

      1st BnchTst      2nd BnchTst       3rd BnchTst

Write      51.1            52.8            51.1

Read      63.8            63.9            63.9

Write      47.2            49.3            53.2

Read      63.7            63.9            63.9

Danne · « **Reply #1665 on:** June 27, 2019, 08:17:43 PM »

Well, test it against the anamorphic mode after running the cinema lua script. It should be continuous. I don´t trust benchmarks with sd_uhs more than as crude indicators.

2blackbar · « **Reply #1666 on:** June 27, 2019, 09:06:28 PM »

How did You do this test? non of the bench test modules i have work with latest builds, only with old ones.

OlRivrRat · « **Reply #1667 on:** June 27, 2019, 09:34:57 PM »

@Danne

Not sure I'm understanding setup > But >

When I run Cinema script & make no further changes, LiveView is squished Horizontally

& I get Apparent Continuous (stop @ 1min) & the file is a smallish .mov ~

If I then turn on "Raw video", LiveView becomes Vertically squished

& I get Apparent Cont' (stop @ 1min) & the file is an expectedly large .MLV ~

OlRivrRat · « **Reply #1668 on:** June 27, 2019, 09:36:20 PM »

@ 2BlackBar

Using Bench.mo from 8 Jun 2018 ~

Danne · « **Reply #1669 on:** June 27, 2019, 10:01:01 PM »

Quote from: OlRivrRat on June 27, 2019, 09:34:57 PM

@Danne

Not sure I'm understanding setup > But >

When I run Cinema script & make no further changes, LiveView is squished Horizontally

& I get Apparent Continuous (stop @ 1min) & the file is a smallish .mov ~

If I then turn on "Raw video", LiveView becomes Vertically squished

& I get Apparent Cont' (stop @ 1min) & the file is an expectedly large .MLV ~

mov? How are you using your 100D? I never experienced a user with so many quirks.

Anyway. Do following:
1 - Enable following modules:
crop_rec.mo
mlv_lite.mo
lua.mo
sd_uhs.mo
mlv_play.mo
2 - restart camera and enter movie mode
3 - Enable mlv_lite then run the lua script calle cinema 2.39:1
4 - Record with this anamorphic mode. If more or less continuos I gurantee sd_uhs patch is working

OlRivrRat · « **Reply #1670 on:** June 27, 2019, 10:32:31 PM »

@Danne

"3 - Enable mlv_lite" ~

Since there is no "mlv_lite" choice I assume that You are referring to "RAW video" in the Movie tab ?

That seems to be working > Getting about 1478 frames in approx' 60sec's ~

'Tis amazing what can be accomplished when Proper Instructions are provided ~

Danne · « **Reply #1671 on:** June 27, 2019, 10:41:40 PM »

Finally

OlRivrRat · « **Reply #1672 on:** June 27, 2019, 11:23:16 PM »

@Danne

What Res should be indicated in "Raw video" with 2.39:1 chosen ?

I'm seeing 1736x726 ~

Danne · « **Reply #1673 on:** June 27, 2019, 11:31:20 PM »

Quote from: OlRivrRat on June 27, 2019, 11:23:16 PM

@Danne

What Res should be indicated in "Raw video" with 2.39:1 chosen ?

I'm seeing 1736x726 ~

Hahaha, dude. Ask IDA_ML. I need a vacation.
Too funny...

OlRivrRat · « **Reply #1674 on:** June 27, 2019, 11:36:28 PM »

Why is that funny ?

News:

Author Topic: Canon 100D / SL1 (Read 677807 times)

dfort