Author Topic: Canon 5D Mark III / 5D3 / Firmware 1.1.3  (Read 195281 times)

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8085
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #275 on: September 19, 2020, 09:01:35 PM »
It seemed to me that there are some focus pixels in the frame. I've also tried to fix bad pixels, but it didn't work. What am I to do?

Giving the community something to look at may be helpful to analyze your problem. Verbal description doesn't work.

wib

  • Member
  • ***
  • Posts: 114
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #276 on: November 10, 2020, 10:38:06 PM »
Could you, please, be so kind to tell me if there are any focus pixel maps for 5D3 1.1.3 1080 full sensor? Cannot delete focus pixels in MLVApp.

or maybe you have hot pixels, which can be fixed as wall as in mlvapp or davinci.
EOS 5D3 123 crop_rec_4k_mlv_snd_isogain_1x3_presets_2020Dec11.5D3123

Wlad81

  • Member
  • ***
  • Posts: 129
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #277 on: December 20, 2020, 11:23:13 PM »
Is it possible to implement h.264 4:2:2 10 bit recording for this camera?
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML Nightly.2021Feb07.5D3113) + SanDisk Extreme Pro 128 GB (CF).

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8085

Wlad81

  • Member
  • ***
  • Posts: 129
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #279 on: December 23, 2020, 09:26:08 PM »
So what am I to search there for?
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML Nightly.2021Feb07.5D3113) + SanDisk Extreme Pro 128 GB (CF).

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8085
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #280 on: December 23, 2020, 09:30:55 PM »
In short: You can't get 10 bit H.264 recording because there is no hardwired processing unit to do so. And Digic 5 processor won't be able to do it in Real Time.

Wlad81

  • Member
  • ***
  • Posts: 129
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #281 on: December 29, 2020, 11:18:43 PM »
Thank you.

Cannot find a link to an interactive page that shows graphically the frame size and the needed write speed.
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML Nightly.2021Feb07.5D3113) + SanDisk Extreme Pro 128 GB (CF).

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8085
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #282 on: December 30, 2020, 03:07:58 AM »
I hope you can do without graphics.
Write speed needed for H.264 modes: Manual
Write speed needed for MLV modes: Shown in bottom lines while adjusting resolution. Or RAW Calculator
Or build your own:
Horizontal x vertical resolution x frame rate x bit depth x compression ratio / 8 = Bandwidth in Bytes/s.

Compression ratio = 1 without compression.
Compressio used: Typical between 0.4 and 0.6, depending on scene.

Wlad81

  • Member
  • ***
  • Posts: 129
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #283 on: January 22, 2021, 09:51:28 PM »
Cannot get the camera working at 1920 50p mode for more than 15-20 sec. The settings are: autofocus off, stab off, 720 50p in Canon menu is on, Kill GlobalDraw is on, Card Spanning is on, SD is overclocked. I've tried ALL-I and IBP modes.

Anyway, it gives the following:

Code: [Select]
ML ASSERT:
0
at mlv_lite.c:2724 (compress_task), task compress_task
lv:1 mode:3

compress_task stack: 1ae530 [1ae5c0-1ad5c0]
0x0006A01C @ b45a8c:1ae560
0x00069878 @ 6a084:1ae530

Magic Lantern version : Nightly.2020Jul15.5D3113
Mercurial changeset   : 8f38ee536de0+ (crop_rec_4k_mlv_snd_isogain_1x3_presets) tip
Built on 2020-07-15 19:47:31 UTC by danne@danands-MBP.
Free Memory  : 213K + 3107K

There are compression errors.

What am I to do?
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML Nightly.2021Feb07.5D3113) + SanDisk Extreme Pro 128 GB (CF).

Danne

  • Developer
  • Hero Member
  • *****
  • Posts: 7188
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #284 on: January 22, 2021, 09:55:57 PM »
Wrong thread but I don´t think higher frame rates modes plays nicely with cardspanning ON so start by setting that to off.

Wlad81

  • Member
  • ***
  • Posts: 129
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #285 on: January 23, 2021, 10:35:06 PM »
Done that, set Bit depth to 10 bit, and the mode works. Thank you!
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML Nightly.2021Feb07.5D3113) + SanDisk Extreme Pro 128 GB (CF).

Danne

  • Developer
  • Hero Member
  • *****
  • Posts: 7188
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #286 on: January 23, 2021, 10:41:22 PM »
Yes, that should do the trick  8).

Wlad81

  • Member
  • ***
  • Posts: 129
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #287 on: January 23, 2021, 10:50:52 PM »
I'm planning to use it for slow motion while shooting certain sport events and/or workouts. Not aiming to be like Riefenstahl (it is impossible), but I have several ideas and hope that ML would help me.
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML Nightly.2021Feb07.5D3113) + SanDisk Extreme Pro 128 GB (CF).

Wlad81

  • Member
  • ***
  • Posts: 129
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #288 on: March 19, 2021, 10:28:58 PM »
I often use the common movie mode when there's no need for highest quality, and I always want to shoot "ALL-I". But for some reason I cannot do that, although the appropriate Canon menu is set to "ALL-I" (1080p 25 fps). And it works though time - one time it may work, the other time it may not work. What am I to do?
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML Nightly.2021Feb07.5D3113) + SanDisk Extreme Pro 128 GB (CF).

Wlad81

  • Member
  • ***
  • Posts: 129
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #289 on: April 23, 2021, 08:48:51 PM »
Recorded a clip yesterday. 1920x1080, 14 bit lossless, card spanning on, SD speed up patching is on. There was NO sound in the last minute of the clip, that is, it has disappeared. I've done nothing with the camera during the shooting and connected no external mike. I was lucky the clip is not that important. So, I'm reporting the problem.
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML Nightly.2021Feb07.5D3113) + SanDisk Extreme Pro 128 GB (CF).

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 8085
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #290 on: April 23, 2021, 08:54:42 PM »

wib

  • Member
  • ***
  • Posts: 114
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #291 on: April 23, 2021, 08:58:27 PM »
I believe it has to do with using the patching (SD Overclock if I’m right). I too have some missing audio clips. I stopped using the patching option and there is no more issues.

What type of SD Card you are using ?
EOS 5D3 123 crop_rec_4k_mlv_snd_isogain_1x3_presets_2020Dec11.5D3123

Wlad81

  • Member
  • ***
  • Posts: 129
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #292 on: April 23, 2021, 09:48:19 PM »
Build version is Nightly.2021Feb07.5D3113. Built on 2021-02-07.

I'm using SanDisk Extreme Pro 170 MB/s 64 GB. Not a fake. CF card is Sandisk Extreme Pro 160 MB/s 128 GB, not a fake.

I'm imaging I'd go to make an interview, fly thousands of miles by plane both ways, ask a man everything I want to know about him, and finally, when I'll get home, it'd appear that there's no sound in most of clips. That's it, the life is over.
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML Nightly.2021Feb07.5D3113) + SanDisk Extreme Pro 128 GB (CF).

wib

  • Member
  • ***
  • Posts: 114
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #293 on: April 24, 2021, 12:43:20 AM »
If you are sticking to 1080p and 14 bits lossless, you don't have to use patching, and with the type of sd and cf you are using you should be fine.
EOS 5D3 123 crop_rec_4k_mlv_snd_isogain_1x3_presets_2020Dec11.5D3123

ArcziPL

  • Contributor
  • Member
  • *****
  • Posts: 182
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #294 on: April 24, 2021, 10:39:21 AM »
I'm imaging I'd go to make an interview, fly thousands of miles by plane both ways, ask a man everything I want to know about him, and finally, when I'll get home, it'd appear that there's no sound in most of clips. That's it, the life is over.
If it's a matter of life and death, you'd better not rely on reverse-engineering hacks but invest in professional equipment.
M50.110 [main cam] | G7X III [pocket cam] | 70D.112 [gathers dust] | M.202 [gathers dust] | waiting for M5II

Wlad81

  • Member
  • ***
  • Posts: 129
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #295 on: April 26, 2021, 09:01:21 PM »
I think it's better to use an external recorder like Zoom H5.

wib
That is, I have to switch the patching off, the SD will be slow, and I'll also have to turn card spanning off?

ArcziPL
5D3 is already a professional camera. But IMHO it's h.264 video is of much lower quality than lossless 14 bit.
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML Nightly.2021Feb07.5D3113) + SanDisk Extreme Pro 128 GB (CF).

wib

  • Member
  • ***
  • Posts: 114
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #296 on: April 27, 2021, 12:48:06 PM »
That is, I have to switch the patching off, the SD will be slow, and I'll also have to turn card spanning off?

I'm using this card :
https://i.imgur.com/6iLs8W3.jpg

SanDisk Extreme PRO
170 MB/s
SDXC V30
128 GB

I'm using "Danne's" last build in 1920x1080 14 bits loss less 25 fps  No card spanning or sd patch switched on. The recording is continuous.
EOS 5D3 123 crop_rec_4k_mlv_snd_isogain_1x3_presets_2020Dec11.5D3123

Wlad81

  • Member
  • ***
  • Posts: 129
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #297 on: May 08, 2021, 12:55:42 AM »
It's OK, the common h.264 movie ALL-I mode works good, the bitrate depends on the contents of the image.

But, I'm still going to shoot an interview in RAW.
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML Nightly.2021Feb07.5D3113) + SanDisk Extreme Pro 128 GB (CF).

Wlad81

  • Member
  • ***
  • Posts: 129
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #298 on: June 07, 2021, 08:45:11 PM »
Right now I'm using "3K 1:1" mode at 2560x1440 @ 25 fps, 1/100 sec, ISO 160 (ISO 100 in sunny day), 14 bit lossless, card spanning, sharpen=80. I'm getting an ultra-sharp image with Canon 24-105 L IS USM lens. I've shot the video with the ship departing from the pier, 3 mins, later coded to ProRes 422 HQ. Almost 7 GB. If anybody wants I'll give a link to this video.
Canon EOS 5D Mk III + Canon 24-105 F/4 L IS USM + SanDisk Exreme Pro 64 GB (SD, ML Nightly.2021Feb07.5D3113) + SanDisk Extreme Pro 128 GB (CF).

Dmytro_ua

  • Member
  • ***
  • Posts: 226
  • Kyiv, Ukraine
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #299 on: June 08, 2021, 12:48:48 PM »
sharpen=80

Sharpening is not applying to RAW footage.
5d3 1.1.3 exp | Canon 16-35 4.0L | Canon 50 1.4 | Canon 100mm 2.8 macro
Ronin-S