Author Topic: Canon 5D Mark III / 5D3 / Firmware 1.1.3  (Read 155399 times)

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7298
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #200 on: July 17, 2018, 06:23:47 PM »
Lookup garry23's threads about focus stacking:
https://www.magiclantern.fm/forum/index.php?board=53.0
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

Mefist

  • New to the forum
  • *
  • Posts: 21
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #201 on: July 17, 2018, 07:45:09 PM »
did not understand anything ((I need to photograph the subject with bracketing on the focus so that it was all in focus

garry23

  • Contributor
  • Hero Member
  • *****
  • Posts: 1985
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #202 on: July 19, 2018, 07:10:38 AM »
@Mefist

Are you seeking to bracket just macro shots or landscape shots?

The ML focus bracketing covers macro, my focus bar and other scripts have been written cover landscape focus stacking needs.

Two separate and radically different use cases.


Semir87

  • Just arrived
  • *
  • Posts: 1
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #203 on: July 21, 2018, 10:20:59 PM »
Hi, I am totally new here. I have a problem with my Canon 5D Mark iii. When I shoot in Silent Burst or Burst in generell with two Cards (SD and CF), the camera writes just to the SD card, and it starts loading and i have to wait the the screen comes back. So after a shooting day i sometimes have 100 photos less on the CF card. Do you know something about this issue?

Thanks :)

Fatcat305

  • Just arrived
  • *
  • Posts: 1
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #204 on: September 29, 2018, 04:16:34 AM »
Hello hello
new to the forum and community.
Running specs: Canon Mark 3_ Firm v. 1.3.3
Task: I need to downgrade to version 1.1.3 to run ML 1.1.3
Protocol: Not working. Firmware v 1.1.3 is downloaded into my SD card but when I try to upgrade it tells me version firmware older than the one installed in camera.
Question: How can I downgrade to v.1.1.3? I don't have the EOS cd, should I buy it?
Any help will be appreciated, thank you.



Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7298
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #205 on: September 29, 2018, 08:02:47 AM »
Top of page -> Downloads -> Download Nightly Builds -> 5D Mark III 1.1.3 -> Installation
"EOS Digital Solution Disk Software" is downloadable without fee.
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

MichaeleahciM

  • New to the forum
  • *
  • Posts: 2
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #206 on: September 29, 2018, 12:47:42 PM »
Dear friends! I apologize if offtopic, but tell me please,
how to get bitrate control h264 on 5D Mark III with Magic Lantern firmware Latest Build: 2018-07-03

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7298
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

MichaeleahciM

  • New to the forum
  • *
  • Posts: 2
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #208 on: September 29, 2018, 03:00:07 PM »
Thanx! :)

berechiah

  • Freshman
  • **
  • Posts: 76
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #209 on: July 02, 2019, 12:23:05 AM »
Hi everybody where will I download the latest 5D Mark III firmware for magic lantern I know Dani updates the eos m

I am just wondering is there any new and improved firmware for the 5D Mark III

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7298
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!


aulden

  • New to the forum
  • *
  • Posts: 13
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #212 on: August 10, 2019, 10:54:36 AM »
Does anyone have any tricks up their sleeve or experience with the ERR 06 (Sensor cleaning failed) on the 5DIII?

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12420
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #213 on: August 21, 2019, 08:44:32 AM »
You should be able to disable it in Canon menu.

Philbo

  • New to the forum
  • *
  • Posts: 10
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #214 on: February 24, 2020, 04:40:07 AM »
Hi guys, I'm new to ML and own a 5D iii running firmware 1.3.6.  I just called canon New Zealand and they said the ONLY way to downgrade to 1.2.3 so I can get ML is to send in my camera and they re-install a new motherboard PCB or some such thing, costing $600 NZ dollars!

Does anyone know of any way at all (apart from sending it to Canon) to downgrade to 1.2.3?

kind regards
Phil

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7298
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #215 on: February 24, 2020, 10:25:06 AM »
ATM the only way to do it is via Canon Support. PCB replacement (and their pricing) sounds like major BS, though. https://www.reddit.com/r/MagicLantern/comments/evuaes/canon_eos_5d_mark_iii_136_downgrade_to_113_by_cps/
Talk to them again, I suggest. Friendly, of course!
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

Joshiewowa

  • New to the forum
  • *
  • Posts: 3
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #216 on: February 24, 2020, 10:29:02 AM »
I also am on 1.3.6.  Anything I can do to help with either porting ML to 1.3.6, or finding a way to roll back to an older firmware?

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7298
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #217 on: February 24, 2020, 08:37:21 PM »
There is a sticky tweet on ML's Twitter account introducing basic steps into dev mode.
If this isn't your cup of tea: Contact your CPS.
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

Joshiewowa

  • New to the forum
  • *
  • Posts: 3
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #218 on: February 24, 2020, 10:22:55 PM »
I assume you're talking about QEMU?  That's the tweet I see pinned is about that.  Otherwise, yeah, I've contacted CPS.

Philbo

  • New to the forum
  • *
  • Posts: 10
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #219 on: February 25, 2020, 04:43:32 AM »
Thanks for the reply guys.  I don't know QEMU or dev mode is!  Sounds complex.  I have just started my photography course and it would be so handy to have access to different video settings, I find it really annoying that Canon prevent the downgrade.  Is this what people mean when they say Canon "cripple" their products.

The answer I got was from the Auckland branch of canon, I contacted the guy in Timaru (south island, nz) so fingers crossed he can do something...

Philbo

  • New to the forum
  • *
  • Posts: 10
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #220 on: February 25, 2020, 08:56:46 AM »
UPDATE:  Just got email back from the canon guy closer to my home.  He said

"I don’t think so Phil, I could try and reload an old backup of the software, but that could be very dangerous – could brick the camera.
Sorry, too risky".

I can see it from his point of view of, him being a repairman and not wanting to take that risk.  But man what a bummer!  :(

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7298
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #221 on: February 25, 2020, 11:45:58 AM »
Is this what people mean when they say Canon "cripple" their products.

No. Unrelated.

Meaning: Yes, because people are not very good at reasoning.
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

CHR1155

  • Just arrived
  • *
  • Posts: 1
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #222 on: March 09, 2020, 12:43:27 AM »
Hi guys!
Just installed ML, everything is fine - but I have noticed that in live view I cant move the focusing frame as easily. I can click to recentre it, and after awhile it might move, but its nowhere as near responsive as it was pre ML.

I do have focus peaking enabled, will this affect it?

Cheers,
Chris

Bobbybomber

  • Just arrived
  • *
  • Posts: 1
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #223 on: March 18, 2020, 07:15:43 AM »
Hi guys. I’m looking for a 1.1.3 firmware, I can’t find a valid link.
I hope you can help me
Thank you

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7298
Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3
« Reply #224 on: April 01, 2020, 02:33:38 PM »
Top of page -> Downloads -> Download nightly builds -> 5D Mark III 1.1.3 -> Installation
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!