Messages

@Ilia3101 I didn't think about that I mean... you know.. skip every 2 and write 2, or what needs to be done, then same with lines.. 

@reddeercity, would it be possible to make something like 5.6k but write only every second pixel to CF (or read only every second pixel, I don't know) so we would have a full sensor image with a ~2.8k resolution?
I think it would be almost free of aliasing when converted to 1080p in post, very low-noise and cinematic.. and it would save the card space and speed and everything, while still being full-frame..

But I don't know if this is technically possible at all

I don't know about 500D, but I had... up to 16 seconds with silent pictures on 550D, if I remember correctly.

You can get an SD card reader for $1

I thought about it. But without direct comparisons, nothing will be clear... And maybe you need to use less noisy values for the second iso, 800 for example. Since the color resolution in the shadows depends on the noise directly, at least I think so..

You can download the archive with 1.1.1 firmware from the official page of the ML installation instructions..
(1. Make sure you are running Canon firmware 1.1.1.)
https://builds.magiclantern.fm/60D-111.html
It's very easy to do

Sorry if I asked too many questions, or something. I just spent a lot of time to figure out how to do it right.
And I am very grateful for all the work and these builds. It breathes new life into this old camera

New 5.6k 16:9 works perfectly. full-frame 5.6k RAW video... This is just amazing

Update!
I am using the latest build now, I managed to get a preview.
- I choose the "ML Gray" preview option
- Only the RAW module is activated
- I press the zoom x5 button (!)
- Now I immediately activate crop_rec 48p.
And the preview works. But if I update the live view or click something else - everything will fall into a black screen.

In the same way, I can choose 3x1 anamorphic instead of 48p, (the whole procedure needs to be done from the beginning) and the preview will work if I don't press the "play" button or "zoom" or something else....

@cinematic interesting, I have the same problem but with crop_rec, not with dual iso. You could try to cycle trough the INFO button to unlock the screen and record something. In my case it works, although the liveview is black...

Sorry missed your question .
did you read this and try ?  Reply #933 plus I don't know the build date you are using or any other information , so with out at I can't help .

I tried this of course. And I tried all the builds starting July 5, 2019.
I notice some difference by the way. In your video, when you turn on the camera, you see a preview in black and white. And I see the preview as a regular video, although raw is on. And when crop-rec is turned on, in some modes I can't get out of the x5 zoom mode...
Also, my "decrease" button does not work, even without ML, I have to scroll through x10 zoom. Although it works when viewing a photo, I can zoom in and out there. I don't know if it's normal or not..
Maybe there are different versions of 5d2? Like different revisions or something?
I tried to reset the camera settings, no difference..
And my camera never gives high resolution through HDMI on any ML builds, official nightly, or any others, it's always VGA..


As for the new preset.. 5.6k is just awesome. The amount of detail is just phenomenal, now I really want it to work at 30 fps or, better 60 Of course I know it's impossible Anyway this is just an awesome build! Wow.

Although, it seems the frame is far from center. And it would be great to be able to change the FPS. Usually I use 1...2 fps and sometimes 0.33 for timelapses at 360 degrees shutter. 4 fps should be good for a motorized slider, but too fast for a timelapse..

The video of the guys arguing not to use log is very contrasty. Not my style. See typical footage from Alexa or RED and here is your reference point. At least for me.

I understand what you mean. I also don't really like too contrasty video.. The point is to get what you want right in the camera. If this means less contrast, or neutral profiles - so be it. The less adjustments in post - the more natural the result will be... at least it seems so.

On the other hand, EOS R uses a very high bit rate, as far as I know. Maybe they even adjusted the settings for shooting in LOG, so maybe everything is completely ok..

I have this one Helios-33 "cine" lens - the smallest 35mm f2.0 lens I have ever seen, it's very nice on EOS M and probably even better on full frame.

You know... people say this lens will only work for a crop sensor. Well this is logical, it was originally for a 35mm video camera, where the film is oriented vertically..

When I got the first manual lens in my life, I couldn't wait until the M42 adapter arrives from China. I just took a piece of PVC pipe, some copper wire, and a lot of hot glue  and made my adapter in 15 minutes. it was NOT parallel, at all, but it worked quite well it was enough for most of the scenes. Honestly, there was almost no difference compared to the factory adapter.

So, of course, it is quite possible.. but... Can I ask which lens do you want to use so much, which is worth the risk of ruining a camera?

But what about all this "stop shooting log"?

I think this makes some sense..
At least I see no reason to use log in low-contrast scenes where nothing is lost and doesn't clip anyway.

I don't have a real log-capable camera, but from all the experiments with lowering the contrast and cinestyle-log presets, I got only one thing - terrible midtones.
99% of people then throw LUT on top and get more or less something, but it turns out to be very flat and lifeless.. and this is because the color information is already irretrievably lost, because we use only 8 bits and also h264. Midtones that contain all the juice in the picture actually lose half their color resolution.

Well, these are just my discoveries from personal experience. There are entire articles on this subject, but I'm not really worried about the slightly clipped dark areas or something, but the colors especially the skintones makes a big difference.


I can be completely wrong by the way, I'm not a professional 
The comparison is nevertheless quite interesting, and the views are very beautiful. It would be interesting to compare on something with smoother gradients or people in the frame.

[Ilia3101]

Yes, I want to say thank you to Ilia3101, my problem has been solved.
This is very important guys. If starting from version 1.8, the program crashes when loading a mlv file, try the 32-bit version.

Now I just have to learn all the new features

Thanks to all who contributed to the creation of this program, for this wonderful app!

Here, 5D2, the lamp is actually completely blue.

https://www.dropbox.com/s/lfkkfeu2wxm3azw/M02-2157.MLV?dl=0
https://www.dropbox.com/s/rjenibg1glmhi04/M02-2158.MLV?dl=0

Interestingly, clipped highlights can still be somehow fixed on the first video using reconstruction.. But certainly not on the second video..

Hi guys! I love this program! I've probably been using it for a year now. BUT..

Starting with version 1.9, the program crashes when I try to open an MLV file.
So I'm still using version 1.8.

I must say right away that I have semi-working drivers for a video card. This is a rather old laptop and it simply does not have working drivers for modern OS.
But version 1.8 works. Maybe you can somehow fix newer versions for compatibility, etc.?

[Very]

Hi, what about my problem? I can't see the preview in all modes except 1:1.
All I see on 48p and 3x1 anamorphic modes is just a black screen.
I tried everything I can, I read almost the entire topic from beginning to end, tried different builds - nothing helped.

Could this be because I use manual (non-chip) lens? Well, I don't even know.

Ok , I see the value in that -- give this a try  ,
a Very eXperimental  5632x2356 2.40 A.R. @ 4.221fps
crop_rec-5k-4fps-5D2-eXperimental.9.08pm.2020Jan01.5D2212.zip

I tried this build, works great! I'll definitely use this, because I've been shooting timelapses with ML for a very long time (with 550d raw video)

I would like to thank you for all the work that you have done reddeercity.

I have such a problem - on crop rec 4k anamorphic, and 48p, all I see on live view is a black screen.
Even going to the ML menu is then quite problematic, some of the buttons simply do not work.
I tried to refresh the screen in different ways, tried different settings, everything..

However, the video is being recorded ok, I even shot some clips in 48p slo-mo. I just don't see the preview when shooting.
Maybe there is some reason or am I missing something?