Yeah seems gd! Thank you
Etiquette, expectations, entitlement...
@autoexec_bin | #magiclantern | Discord | Reddit | Server issues
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuQuote from: limey on August 20, 2015, 01:55:26 PMThank u, yeah the crushed details in the shadows was an artistic look I went with that's all. Made me lose lots of details.
Yeh whatever grade or filter applied to the DNGs definitely killed detail, but I liked the 99% of the shots. All of them except ending with the catacombs to me was weird. The other stuff was all cool though. Slo mo, slightly slo mor, hyperlapse, slo rotations, timelapse, etc. In fact, I think some of the content of the shots was so good, I started to not care about crushed shadows.
Quote from: jayhas on August 18, 2015, 01:25:18 PMThank u
Nice... I like it.
Quote from: Levas on August 18, 2015, 10:22:42 AMThanks, yeah actually at 1st I had more details in the shadows but then I went with the look with flat dark areas and was hesitating between the two wanted to show details of the raw, and wanted the flat dark areas so I tried to mix between the two but ended up killing a lot of details for it...
I like the dreamy slowmotion in the first part. Speed of the edit is well done to the speed of the music.
Only thing which could be perhaps better is the dark shadows in some shots. Since it was shot in raw I think you could have lifted the shadows a bit more in the very contrasty middle of the day shots.
Quote from: gmfotografie on August 17, 2015, 09:27:46 PMYeah some Shots were stabilized in post
handheld....?
did you use a stabilyzer in postproduction?
even i´m not old but such a relaxed hand would be my dream ;-)
Quote from: Kharak on August 17, 2015, 03:01:08 PM
Nice video!
What resolution were you recording at? Sorry to say, but I do see the same softness over most of the 6D raw videos I've seen.. Especially wide shots with lots of detail, the details seem to murk together somehow..
Did you try adding noise to dither the image more?
I am all the time one click away from buying the Rokinon 12 mm Cine T.3.1
Can you tell me about your experience with it?
What is holding me back is the lack of videos on the net where people used this lens... I find a couple of reviews on youtube, but to be honest I think those guys will praise any lens they get from a lens manufacturer, to stay under their wings.. So I don't trust their reviews and secondly the guys who used the lens were more in to photography too...
I'd really like to hear what your opinion is about the lens @keepersdungeon. Pros and cons..
I assume you did some defishey on the footage in this video, if so, how much? what kind? Did you try with Fisheye Hemi - Defisheying in Photoshop? I've seen some wonderful results with photographs using the 12 mm and the Hemi plugin, I am wondering how it comes out with video.
And 3x crop mode, how does it come out with the 12 mm?
Basically.. I wanna shoot fisheye with this lens and make it not look like fisheye... Then I am happy. Would love for some DNG's to see what I can get with this lens.
Regards.
Kharak
Quote from: DeafEyeJedi on August 16, 2015, 06:46:42 PMRaw, why it looks like h264?
With the 6D did you shoot in h264 or RAW?
Quote from: Levthon on August 12, 2015, 05:11:24 PMIt's the filter I mentioned try to google it.
what is VAF?
Quote from: Levthon on August 12, 2015, 04:59:37 PMIt's not just in raw mode. U can try with raw therapee but no matter what u do there will always be visible.(well u can take that part on a single frame and track ur video, but that doesn't work in all cases) so U need to avoid this by taking less sharp footages while shooting or get a filter for moire that u put over ur censor or crop mode. Gd luck
Does anyone have a solution for jaggy edges (moire) in raw video? is it possible to make it less visible in after effects?
Quote from: Levthon on August 06, 2015, 10:07:27 AMhttp://www.magiclantern.fm/forum/index.php?topic=6215.0
i want to know whats the highest continues recording raw video time(and with what resolution) with sound on 6D . i want to record straight footage until my card is full (128gb)
Quote from: Levthon on August 05, 2015, 11:56:51 PMFor longer recording U need to lower the resolution
can you record sound using mlvrec raw video with the latest nightly build? also can someone whos expriemtning with raw video tell me, if its possible to make at least 7 minutes raw footage without any hickups in the ML? thanks
Quote from: Marsu42 on July 16, 2015, 01:56:42 PMWas using MLV
I don't do the video thing and thus haven't encountered these before. One question though: Is this with vanilla Canon h264 video, or with h264 and ML tweaks, or with a custom ML raw video module?
In any case, imho good thing 6d.116 is merged and there's more widespread testing - with the multitude of configs and use scenarios out there it's virtually impossible to finalize some beta build only through a handful of daring testers compiling it themselves or grabbing it of a buried forum thread.
Quote from: KelvinK on July 14, 2015, 09:15:59 AMOh ok, it never happened to me b4. Thanks for ur reply
The "busy" bug seems to be common from builds starting from May. It started from 113 builds. Random thing, sometimes it can work fine for hours, sometime it says "busy" and you have to turn camera off. This is a bug, has nothing with "busy" message when buffer is written to card.
Quote from: Levas on July 11, 2015, 12:58:13 PMThanks Levas u're absolutely right! I did some test yesterday and at f/2.8 it was a bit better.
you're using the lens wide open at 1.8.
You're seeing reflections or shapes from lenses inside your nikkor, lighted by the many lights in your night scene.
I bet those halos disappear when you stop down to f2.8 or maybe you need to go to f4.0.
But since you're already at iso 3200, stopping down isn't much of an option [emoji14]
Most lenses are not so good wide open, very normal for 50mm high speed primes.
Most of them are soft wide open, others show this type of halos, especially towards the edges.
You can see in your frame that the halos getting bigger on the edges.
Quote from: DeafEyeJedi on July 10, 2015, 11:14:29 PMCanon 6D
What camera did you use for this shot?
Quote from: nikonja on July 07, 2015, 02:32:34 PMDid u disable raw/mlv recording module?
But I had that problem when I did normal movie record not raw. After I removed ML all was ok, and than i put it back and same problem is back.
Quote from: toursbrun on July 07, 2015, 02:12:51 PM
Hi,
I have a Canon 6d and used magic lantern previously and worked great. I updated to 1.1.6 and downloaded the latest build, and now I'm getting the error message "movie stopped automatically" or It stops after a few seconds.
Forums said it was the card so I got a 280 mb/s card and still having the same issue.
ML worked on this camera before... what can I do to fix this?
Quote from: KelvinK on June 08, 2015, 10:23:45 AMHello Yeah those pixels appears at iso 6400 (not sure if 3200 too should try it tonight) . I was able to remove most but there are still a lot and as they go randomly on each frame they flicker while playing the video. And I realized that it's only on highlights area.
LR removes automatically removes most of dead pixels as well.
Page created in 0.095 seconds with 14 queries.