Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Renovatio

Pages: [1]
Camera-specific Development / Re: Canon 50D
« on: March 31, 2015, 11:01:48 PM »
Yes but if you push the higher resolution, camera will set the best it can, so the best is 1984*830.

I'm on 2,39:1 because for cinema is so near to 2k scope resolution...

Thanks anyway

Camera-specific Development / Re: Canon 50D
« on: March 31, 2015, 10:37:04 PM »
I see, but if it's so maybe you can set an higher value on 2,39:1.

Can you check it for me, please? Thanks

Camera-specific Development / Re: Canon 50D
« on: March 31, 2015, 10:02:04 PM »
Two different things, and three with mine :D

The max i can get with my build right now is 1984*830. Crop mode, sure.

So we can get 2000*852? Which build? Thanks a lot

Camera-specific Development / Re: Canon 50D
« on: March 31, 2015, 02:51:35 AM »
My fault, sometimes brain's disconnected and in this period was sure picture style could influence the raw footage. Omg.

Sorry about that but as I shoot photos in jpeg cause don't care about post production for photos, good to know all of this. Thanks.

So please can I ask the Max resolution you can get for raw video in crop mode in 2,39? Thanks.

Sorry again  .-.

Camera-specific Development / Re: Canon 50D
« on: March 30, 2015, 11:40:18 PM »
Licaon, a way more to stay just with neutral :D

But I found out there's an option to just go less than zero, absolute zero sharpness: what do you think? On or off? I red that sharpness is better in post, but don't know where's the limit..

Another thing I want to ask is: can we get 2k scope in crop mode? We're so near.. Aspect ratio 2,39:1, its really 1958 in my build, if I remember well.. Just 90 pixels.. 'just'

Just "re-installed" windows, i'm getting an error about visual c++.

Which version should i install? Thanks a lot.

Camera-specific Development / Re: Canon 50D
« on: March 27, 2015, 06:04:43 PM »
Hey, thanks a lot Licaon, think i'll go just with "neutral" as you suggest.

In fact, in that page there's an "UPDATE: Warning to all users of the Technicolor Cinema-style flat-profile! Using the Technicolor style will severely limit your dynamic range", don't think will use it. Thanks.

Camera-specific Development / Re: Canon 50D
« on: March 27, 2015, 05:46:53 PM »
Hi guys, don't know again if this is the right place but it's about 50d...Took it again, it's fantastic but a few question:

- Bit rate: what should i choose for a good compromise? Have a fast card (komputerbay 1000x), want to improve raw video as possible but with costant shooting. Now i'm on 1.4x, can it go?

- Profile: i'm on neutral, just 0000. Has to set the best for color correction in post, so neutral, but is there something better, or should i touch some parts of neutral? Just an advice, from your experience.

A note: in crop mode i tried to get the best resolution from 2,39:1 aspect ratio (something like 1958*...), camera hasn't stop but then, with internal file manager, and with the file playing, i notice some mistakes, errors, such as "screen tearing" (or just lines..) on certain frames, and "blacklash" (don't know how to say, some frames goes, then seems to stop but i'm the other frame and seems i skipped a part of the video but could be just the internal player of the camera) 

Thanks a lot.

Raw Video Postprocessing / Re: ML RAW-tools for Linux
« on: March 22, 2015, 08:26:17 PM »
Hi guys, can you please share your workflow on linux?
I'm going to install lubuntu, would like to see if it's possible to make something good. See applications here but would like to know the process. Thanks.

Camera-specific Development / Re: Canon 50D
« on: March 22, 2015, 07:43:42 PM »
I don't know how but now it works perfectly. I delete personal seettings so many times, a sort of a combination this time makes it work and i'm happy LOL

Never load a different build, it's from febrary now and i can join this fantastic raw video.
Thanks to all


Camera-specific Development / Re: Canon 50D
« on: March 22, 2015, 03:06:20 PM »
I tried to remove magic lantern with format option, and even by installing magic lantern and then waiting for removing boot flag.
Then i update to official 1.0.9 firmware even the camera was already there, to try to reset it to default firmware.

And then i update with last magic lantern e one old build (casual: 20 febrary).

Nothing, the problem is here and expo lock was turned off, of course.

Camera-specific Development / Re: Canon 50D
« on: March 22, 2015, 11:27:55 AM »
Hi guys,

Yesterday something strange happened to me when i tried to load last nightly build: seems i don't have a complete manual control of the camera, so if i turn suhtter then even iso changes and so on if i close or open lens i changes shutter too.  With the last one seems to change settings on its own just look around with the camera in the room.

I tried old builds and seems are just less problematic. What can i do? Thanks a lot. I'm on "M" mode, of course, i guess there's some setting i have to touch.

Hi guys, I've a little question to make:how is the workflow on Linux?

Recently a friend of mine show me something about lubuntu and told me a few things on linux kernel operation systems based. The time was not so long but I've gotcha this way could improve my poor pc performance. A few doubts about software, so asking workflow.

On windows right now my raw files become dng with raw2cdng little program, then with after effects and camera raw i open them and make color correction. Render in dnxhd and edit with sony vegas for final render video.

With Linux is just so.. simple ?

I'm afraid above all about color correction and tutorial I can find on YouTube for windows and Mac software.. Such as after effects..

Camera-specific Development / Re: Canon 50D
« on: September 01, 2014, 10:53:37 PM »
Well, for now did a manual cleaning of sensor and took some shots at 100iso, and the results are very impressive. We'll see, maybe could be the converter..

Camera-specific Development / Re: Canon 50D
« on: September 01, 2014, 05:14:48 PM »
Hi guys, i'm trying for the first time Raw and Magic Lantern with MLV (not just raw, leaved on Off).

A question: is it normal i see some pink dot? I'm doing some test at 800 iso (think this can help the DR), but i see some kind of "noise" (not depending from iso, i guess), and in some frame really pink dots.

Any suggestions? Really thanks a lot 

Edit: i'm converting mlv to dng with "mlv converter 1.9.1", didn't touch any option in the program..should i?

Camera-specific Development / Re: Canon 50D
« on: August 14, 2014, 10:26:30 AM »
Hi guys, finally gettin an used Canon 50d to try Raw Video in a budget solution (from ebay, from america! i'm in europe lol). Also ordered a Tamron 17-50vc to have some is/os/stabilization during that video. If it works properly of course...

Some general suggestions?

Also i haven't take the CF. Which one, the cheapest? Thanks really a lot. 

Raw Video / Re: Current raw video capabilities - All ML cameras
« on: August 11, 2014, 10:36:14 AM »
Hi guys,

i know maybe you said this so many times, but finally i'm gettin canon 50d to try raw video without becoming poor.
So now a  CF: which one? Don't need the fastest, don't wanna pay speed i don't need. What about komputerbay 64gb 1000x? Also with something more i've to take something better?

Thanks a lot

Raw Video / Re: Current raw video capabilities - All ML cameras
« on: May 02, 2014, 10:01:26 PM »
50D if u dont need audio and the flip screen. 650D if u need audio and the flip screen
Well, no, no need audio (zoom h1) and flip screen. Only point is i've to but a CF and would like to know the minium to obtain the best that i can. Thanks a lot.

Raw Video / Re: Current raw video capabilities - All ML cameras
« on: May 02, 2014, 12:19:54 AM »
50d vs 650d Raw cheap solution: which one should i get?


Pages: [1]