Messages

       But only if it has not been "Locked Out" by the Power On Switch ~

                     @Alex & WeEIMC

           I have Upped My 80D to 103 & now Have ROM & SFData Dumps if anyone is interested ~

      @IDA_ML

   My SL1 spends the vast majority of Its life behind the EFs 10-18 &

is usually quite happy there ~

   Due to lack of info, By the time I had Stumbled into the area where

it seemed that Your "settings" would apply I was out of time to do much

testing but it does appear as though, If I have the "settings" correct, I am

getting similar results ~ I did not have time to test any other Lens ~

                     @ RicardoPT

       Would like to see Your 5K but My FireFox won't allow ~

                     @ DarkCAL

"Helios 44
Schneider Cinelux ES 2x
SLR Magic Rangefinder"

           So which of these Pieces were used in this Vid example ?

                 @ Iliush

    "Can I install another build on another card, and alternate them for a better comparison on the same camera?"

           Yes & infact You can keep multiple versions on the same card > Just create a Folder/Directory in

which to "Hide" the Version/s not being used ~

                 @ N_A_H

        Nice Shot ~ 1 thing I've noticed about Dragon Flies is that they are very repetitive creatures,

so if @1st They get away just be patient & They soon, most likely, will return ~

      @ ThetaSigma

   I would say such a thing because logic dictates that until it actually comes to be

there is absolutely no way of knowing that it actually will ~

   Where have You seen comments of similarity between 80D & 200D ?

"compiling latest version can be done from this branch:"

That might be true for those among us here that know how to compile ~

I don't happen to be one of those ~ Looked @ the Branch page & nothing there makes any sense to me ~

But it probably doesn't matter as even if I were able to figure out how to compile something I suspect that

I would not trust My results ~

Ahhaaaa > Just wasn't registering the 260997120 to be Bytes ~

& why did You write X12x24/8 instead of x36 ?

      @Walter

   I'm not @all knowledgeable about calculations

so would like to know >

4096 x 1770 x 12 x 24 /8 = 260997120

How does 260997120 = 249MB/s

           @HiRez

Just so Ya Know ~ There have been 5 UpDates since

"crop_rec_4k_mlv_snd_isogain_1x3_presets_2019Jun14.100D101"

with the latest being Jun28 ~

           @Igor_Braun

Best Way to Avoid Might Be to Not Use Experimental ML when shooting an Event ~ {:~))

           @karthiksivakumar

Does not exist Yet & Quite Actually & Sadly > May Never ~

      @Danne

   I am trying to follow Your instructions as closely as I can ~

I am now using 27Jun19 Build ~

"1 - Enable following modules:
crop_rec.mo
mlv_lite.mo
lua.mo
sd_uhs.mo
mlv_play.mo"

   Done

"2 - restart camera and enter movie mode"

   Done

'3 - Enable mlv_lite"

   "RAW video" (Can Only Assume that that is what You are Referring To) Is Already Enabled & shows
      ON, 1736x1160 1:61x with an AR of "1:2 almost 3:2" not 2.39:1 (only checked this out of curiosity, did not alter)

"then run the lua script calle cinema 2.39:1"

   Done, I Think > don't see reference to "calle" anywhere ~ & nothing seems to change under Movie Menu

"4 - Record with this anamorphic mode. If more or less continuos I gurantee sd_uhs patch is working"

   Done, I Think > Do get Apparent Continuous Rec so agree that sd_uhs is working

but results do not appear to be anamorphic > are they suppose to or not ~

      @ Danne

   What's the problem ? Just followed Your instructions I think. How about I not bother

to waste My time testing & reporting back to You without You providing a recorded video

containing every step you do on your camera. Or @Least a set of Complete instructions on

how to properly use that which You are developing ~

   I'm guessing that I am to assume from Your Sudden Snarkiness that there is something

not right about the Res of 1736x726 being indicated in "Raw video" with 2.39:1 chosen ~

Why is that funny ?

           @Danne

What Res should be indicated in "Raw video" with 2.39:1 chosen ?

I'm seeing 1736x726 ~

           @Danne

"3 - Enable mlv_lite" ~

Since there is no "mlv_lite" choice I assume that You are referring to "RAW video" in the Movie tab ?

That seems to be working > Getting about 1478 frames in approx' 60sec's ~

'Tis amazing what can be accomplished when Proper Instructions are provided ~

           @ 2BlackBar

Using Bench.mo from 8 Jun 2018 ~

      @Danne

   Not sure I'm understanding setup > But >

When I run Cinema script & make no further changes, LiveView is squished Horizontally

& I get Apparent Continuous (stop @ 1min) & the file is a smallish .mov ~

If I then turn on "Raw video", LiveView becomes Vertically squished

& I get Apparent Cont' (stop @ 1min) & the file is an expectedly large .MLV ~

           @ Danne

Don't get any 'Formal' notification that sd_uhs is running & Bench'Tests are inconsistent >

On 4 seperate BnchTsts Writes are from 42.1 - 60.9 ~

Used Latest 22Jun Build on SanDisk ExtremePro 95MB/s U3 C10

      1st BnchTst      2nd BnchTst        4th BnchTst

Write      47.8            42.1            47.2

Read      71.7            49.0            58.7

Write      60.9            45.8            50.2

Read      71.8            49.0            58.9


Then Switched back to 8May Build to compare as that is when I had last tested >

      1st BnchTst      2nd BnchTst        3rd BnchTst

Write      51.1            52.8            51.1

Read      63.8            63.9            63.9

Write      47.2            49.3            53.2

Read      63.7            63.9            63.9

           @Canneloni

Might be helpful to let us know what SD that is ~

   @RDC

Pretty sure I followed 1st Post Tut' correctly ~

CFCard BnchMrks @ about 65MB/s LiveView On & 87MB/s LiveView Off

This CF Tests about 109MB/s in a 5DM4

           @ Danne

Don't get any 'Formal' notification that sd_uhs is running & Bench'Test are inconsistent >

On 4 seperate BnchTsts Writes are from 42.1 - 60.9 ~

1st BnchTst I ran Showed 1st Write @ 47.8 & 2nd @ 60.9 & never got that high again ~