Messages

I know magiclantern-v2.3.NEXT.2013Oct07.6D113 is not your build, but maybe you can quicker comunicate with developers...
Your build testing now!
Oh, audio missing was my error, in earler build audio is disabled in canon menu by default and ML write
a separate wav file anyway, in this last builds, your and official, audio must be enabled in canon menu...

The font is white now... I love colored sutter speed/focal lenght/iso/etc indications!

How did you resaved it? There is no such a function in File menu.

Another bug (?):
video and audio is out of sync AND must use Rate stretch tool on audio trak (about 98%, depends on lenght),
all videos I shooted with that version of ML!

Yesterday I made a test with magiclantern-v2.3.NEXT.2013Oct07.6D113 until the card goes full, I have
3 splitted video files:
1. there is no audio
2. when the card becomes full I have error 04 AND the last one is a*.dat file+33KB *.mov file...

So this "*.dat file issue" is generic to all ML builds...hope not!

Developers, take a look at this please, I'm immediatly going to doom9 forum, but not shure if they can
help me/us, so may be you'll be able to make an utility....

Thank you for your answer, 1%!
I tried solutions in that thread, none of these worked for me! I changed extension to *.264 and *.h264,
an even without extension-nothing! The video was shooted with default codec options! Those are a couple of
interviews from Fiera di Milano that I willy need! Do you think it will be possible to create a ffmpeg
version vor this kind of ML dat files?
Last try I did was using ffmpeg, this is the result:

riko-pc:~ rikomoon$ /Volumes/ADATA\ CH11/Raw\ h264/SnowLeopard_Lion_Mountain_Lion_15.08.2013/ffmpeg  -f h264 -i /Volumes/ADATA\ CH11/2013.10.04\ MIlano/Video/Intervista\ russi/Intervista\ russi\ 6d/MVI_9156.264 -vcodec copy angel.mp4
ffmpeg version 2.0.1 Copyright (c) 2000-2013 the FFmpeg developers
  built on Aug 15 2013 10:56:46 with llvm-gcc 4.2.1 (LLVM build 2336.11.00)
  configuration: --prefix=/Volumes/Ramdisk/sw --enable-gpl --enable-pthreads --enable-version3 --enable-libspeex --enable-libvpx --disable-decoder=libvpx --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-avfilter --enable-libopencore_amrwb --enable-libopencore_amrnb --enable-filters --enable-libgsm --arch=x86_64 --enable-runtime-cpudetect
  libavutil      52. 38.100 / 52. 38.100
  libavcodec     55. 18.102 / 55. 18.102
  libavformat    55. 12.100 / 55. 12.100
  libavdevice    55.  3.100 / 55.  3.100
  libavfilter     3. 79.101 /  3. 79.101
  libswscale      2.  3.100 /  2.  3.100
  libswresample   0. 17.102 /  0. 17.102
  libpostproc    52.  3.100 / 52.  3.100
[h264 @ 0x7fa633822c00] missing picture in access unit with size 1729462272
[h264 @ 0x7fa633822c00] no frame!
[h264 @ 0x7fa63381a600] Stream #0: not enough frames to estimate rate; consider increasing probesize
[h264 @ 0x7fa63381a600] decoding for stream 0 failed
[h264 @ 0x7fa63381a600] Could not find codec parameters for stream 0 (Video: h264): unspecified size
Consider increasing the value for the 'analyzeduration' and 'probesize' options
/Volumes/ADATA CH11/2013.10.04 MIlano/Video/Intervista russi/Intervista russi 6d/MVI_9156.264: could not find codec parameters

I hope this is the right subforum!
So: the camera stops recording with error 70, must reinset the battery to get it working again! The log is:
ASSERT: FALSE
at ./Memory/Memory.c:187, task ASIF
lv:1 mode:3


Magic Lantern version : v2.3.NEXT.2013Sep22.6D113
Mercurial changeset   : 223e924813e5+ (unified) tip
Built on 2013-09-22 15:54:35 UTC by user@D610.
Free Memory  : 379K + 418K

My problem is now I have 2 dat file (1.44GB and 1.73GB), can't edit atoms because Atom Inspector cant open it
(even if I change extension to mov or mp4)!
I need this files! Please help me to repair them!
Thanks!

1%, I don't understand your point! My question was: If I can do 24fps continuously or not at some resolution, would it be possible take this 24 dngs and compress them to lossy dng on the fly using internal resources?
Thank you!

What you mean 1%? So, in theory, is it possible? Would be marvelous, I'have read that lossy dng are quite same quality
as lossless! Not shure about, but maybe it is better then sqeezed images...

Hi 1% and others!

Maybe it was already asked but anyway I have a question...I quite sure the answer is no, but:

is digic cpu capable to dng compression, maybe via script? Too slow?
Asking couse a dng at 1792x1008 is about (in my case) 3.2MB, and a lossy dng is 580KB!!!
Thanks!

Hi 1%! I'm reding every day this topic so I've done all 105pages!
I have a question about HDMI out (don't find answer on this question yet)! Do you think a day it will possible to have uncompressed HDMI out?
OR better to embed dng or raw or LV image in hdmi stream in cam, record it with Ninja and then extract dngs from it on pc/mac?
May be stupid/futuristic question but I am curios about this possibility becouse our SD controller is too slow to record dngs to SD card and HDMI specs are (from wiki):

-HDMI permits sRGB 4:4:4 chroma subsampling (8–16 bits per component), xvYCC 4:4:4 chroma subsampling (8–16 bits per component), YCbCr 4:4:4 chroma subsampling (8–16 bits per component), or YCbCr 4:2:2 chroma subsampling (8–12 bits per component).

-HDMI 1.4 was released on May 28, 2009, and the first HDMI 1.4 products were available in the second half of 2009.[111][143] HDMI 1.4 increases the maximum resolution to 4K × 2K, i.e. 3840 × 2160p (Quad HD) at 24 Hz/25 Hz/30 Hz or 4096 × 2160p at 24 Hz (which is a resolution used with digital theaters); an HDMI Ethernet Channel (HEC), which allows for a 100 Mbit/s Ethernet connection between the two HDMI connected devices so they can share an Internet connection;[60] and introduces an Audio Return Channel (ARC),[59] 3D Over HDMI, a new Micro HDMI Connector, expanded support for color spaces, with the addition of sYCC601, Adobe RGB and Adobe YCC601; and an Automotive Connection System.

In this thread:
http://www.magiclantern.fm/forum/index.php?topic=6215.0
I see it would be possible to have Max resolution in crop mode 2560x944...

Just curios....
Thanks!

Hi guys! I know all you are now busy with the raw staff, bat can I ask you if it would be possible to make record 2 channels like on 5dmkII? I mean one channel from internal mic and one from external mic?
Thanks!

Hi guys!
have a strange problem here! But firstly: I'm not a noob, used ML on 5dmkII, 7d, 550d and I've read all 55pages!
Yestarday, after hours of pain, I've installed ML on my new 6d, all ok! My problem is when I enable Focus peaking
the video on LCD is something like 10fps, recording is fine! So I disabled all overlays but Focus peaking, have the
same result! I enabled all overlays but Focus peaking and have no problem! My maybe only goal using ML is the
Focus peaking function! Please help!
Thanks and exuse my english!

Yes, it is!

Not working on mine  Rear buttons dont work, only if I action one of the 4 buttons on upper LCD I can change ISO, drive mode etc Shutter speed and aperture seems to work half of times..
Sorry for my english!

Hi coutts! Grait job!
Just a question: do you think it will possible to enable noise reduction for exposure less then 1sec? (C.Fn-02) Would be grait with high ISO
and exposures around 1/20-1/80!
Thanks!

by Riko