Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Brand Brand

Quote from: Walter Schulz on December 02, 2015, 09:23:54 PM
Hard to believe this little cam does clean Full-HD via HDMI. Is there a second person able to confirm this?

LOL Nah bruh, the SL1 does not have clean HDMI out. I don't know what the poster meant by that. Unless hes saying ML is forcing the SL1 to output clean HDMI. This is from Imaging Resource "Clean" HDMI output not supported. Live view feed is only about 50% of screen, surrounded by black area containing readouts.

On a monitor the live image shows 50% and then once you press info on the SL1 the live image is expanded to about 75% of the screen and black border is reduced. But you can toggle the user interface with the info button, it works like a display button.

Unless this is what is considered clean HDMI out, great. And if that's the case I'm now even more confused.

Quote from: fdewet on December 02, 2015, 09:18:07 PM
Been waiting a year for Magic Lantern for the Canon 100d and what a surprise to find someone has made it possible. I immediately loaded it on my camera and now have clean, uncompressed video out via HDMI at full HD to feed into my Blackmagic Design Mini Recorder

Bet! Are you saying that ML is forcing clean HDMI footage out of the SL1 onto your recorder? Because the SL1 doesn't natively support clean HDMI. Do you know what codec the uncompressed footage is in? H.264 isn't bad but I'll take uncompressed, it ain't gotta be RAW. How exactly did you get it do clean HDMI out in ML?

Quote from: Felipe on December 02, 2015, 09:25:50 PM
It scales down the image like 10%, But yes clean

Are you sure this is clean HDMI out. Sure you can remove the user interface but the image is still re-scaled.

Quote from: nikfreak on December 02, 2015, 09:29:50 PM
never tried myself but yes I have seen reports on internet that sl1 can do this  :P

Yeah, I read that. Both posters realized that it wasn't clean HDMI out. Its not the same as the clean HDMI out as with the  5DMark3.

Quote from: DeafEyeJedi on December 03, 2015, 06:47:57 AM
I just tried and can confirm this as well. But will need to double check the true resolution size because I don't think it's full HD either but close enough.

Are you for real bruh? LOL. Did you capture the footage on an HDMI recorder?
Camera-specific Development / Re: Canon 1100D / T3
November 12, 2015, 03:03:57 PM
It feels soooooo good to be back. Positive people.
Archived porting threads / Re: Canon 100D / SL1
November 27, 2013, 04:43:42 AM
Ahhhhhh.... Seeing how every one is so eager and watching this thread like a pack of wolves at a cow convention, has anyone tried to port anything?

I'll see what I can do.
Archived porting threads / Re: Canon 100D / SL1
November 27, 2013, 03:04:51 AM
You're too late I already tried it but i couldnt find the .fir file   >:(
I will do it
Im game
All in the name of the advancement of the Sciences
Archived porting threads / Re: Canon 100D / SL1
November 26, 2013, 02:38:53 AM
Ok so why not find a .fir file for the T5i and use it for the 100D since the 100D is the newest of the two cameras and try to run ML on the 100D... since they are so identical and what not it could work... or not IDK

But the SL1 is cool as hell LOL
Camera-specific Development / Re: Canon 1100D / T3
June 12, 2013, 07:22:57 AM
Yo nanomad is there anything we can do in assisting you with the possibility of RAW video for the T3? I will test anything and I mean anything LOL. Let us know what we can do. Is there a work around to address the low memory or small buffer issue?

For some reason a lot of people look down on the T3 like its a nerdy, pimpled face, couldn't bust a grape in a food fight, virgin younger brother of the other newer Canon models, that just wanted to chill out with his bros. In some ways it is: its less expensive, its lighter in weight, its "feels" a lil different, and its lacks some manual features and functions fresh out of the box. However, its still a dang good DSLR out of the store.

You throw Magic Lantern firmware into the mix and hey, you got one helluva DSLR that does rival those that cost 2 to 3 times as much!

I don't know about anybody else but I believe the T3 has benefited the most from ML and still has the most to gain. Yeah, even more so than the 50D as far as in terms of practicality. I'm not taking anything away from the 50D engineering feat, cuz that ish was way super cool, but people at least considered it pro level before ML.

Magic Lantern and you has taken our DSLR out of DSLR purgatory and has given it wings.  8)

Camera-specific Development / Re: Canon 1100D / T3
April 16, 2013, 11:02:06 PM
Quote from: 47Crows on April 15, 2013, 08:19:50 AM
Maybe somebody did an April's Fools joke and forgot about it? ;D

Good one lol  8)
Camera-specific Development / Re: Canon 1100D / T3
April 14, 2013, 09:31:07 PM
Quote from: snakesanti on April 14, 2013, 08:28:56 PM
Hi there

Have to report same bug.

Don't know why, a few weeks since last update in my camera, today i've downloaded latest nightly, and my 1100D do not start in any way.

When i close the batt door, red light goes on (with no blinking) and I cant do anything else. Tried with set button, in P way. I tried also formatting sd card in my pc, then, formatting on camera (starts well without ML), and then reinstalling ML: same problem; red light on, camera dead.

I had to ger off ML and use original firm with card formatted...

Any solution?

The latest nightly build that works for me without any obvious incident (other than exposure override option not working with my kit lenses) is the March 31st nightly build. Other than that all of the April nightly builds give me the same experience you have had  8)
Camera-specific Development / Re: Canon 1100D / T3
April 14, 2013, 03:35:21 PM
Quote from: nanomad on April 14, 2013, 09:52:25 AM
I can confirm that. It works fine with the other non-kit lenses I have .. ... but they are all primes :P

Yes my friend, confirm indeed. It is peculiar. Is it not?  8)
Camera-specific Development / Re: Canon 1100D / T3
April 14, 2013, 04:47:44 AM
OK, since my most recent post did not receive a response- on to the next one. This manual aperture control issue in video mode that has been a big topic for T3 owners, is really strange because for me since I own the 50mm prime lens, the exposure override ON option works perfect for me when I want to manually control the aperture when recording with the 50mm in use. The only time exposure override does not manually control the aperture is when I use the 18-55mm II or my other kit lens that is listed below. It seems to be just the kit lenses that seems to not work properly, at least for me.   
Camera-specific Development / Re: Canon 1100D / T3
March 06, 2013, 09:03:24 PM
Greetings a1ex, nanomad and all Magic Lantern forum members. First off thanks to those whom make this brilliant firmware possible. To the administrators, If I may, I've got a quick question regarding the FPS override feature. Lets say I'd like to record a video clip at 24 fps with a shutter speed of 1/48 and a shutter angle of 180 degrees to help with the artificial interior light flickering, and to get that "cinematic effect"at an indoor event. Because internal audio will be disabled during the recording process when using the FPS override feature, I would have to use my external Zoom H1 microphone to capture audio. I would also have to use a clap board etc., to sync the video and audio in my NLE. My question is has there been any talk about enabling audio at the start of recording a small time frame of maybe 5 seconds or even less, then automatically disabling audio. That way the clap board sound can be used to sync the audio and video that will be captured internally into the Canon. I would then sync my internal captured Canon clap board sound audio and video with the clap board sound of my external Zoom H1 mic in my video editor. However, I would still have to use my external mic to capture audio for the duration of the video, but as you can see it will be a tremendous help to our editing workflow. If this has already been discussed in the forum I do apologize. Thanks.  8)
Right on! I hear ya loud and clear. But it sounds very awesome.
:o....... Hey nanomad, whats the latest on that crazy project you've been workin on
Come on give us a hint LOL  8)
Cool! 8) I agree, the protect image option sounds like a winner. I wonder what the other members think...
@nanomad is quick rate when we select how many stars to give an image/movie  ??? ... Blame it on Thursday LOL, and maybe Q for the shortcuts  :P otherwise its up to you, you've been on point on everything as usual  8)
@wave, Its still a nice video  8)
@nanomad, Ok Im using RC 2 and something weird just happened  :o ... FPS override just completely disappeared from the ML menu. And it did not create a crash log. And Im still having buffering issues when I change the FPS in movie mode even after I did like u said and I left the bit rate at default
@nanomad cool, is it just me or did I see an option for Kelvin WB or WB.override or Kelvin exp.override in one of the ML builds that was posted for the 1100D? I apologize that I cant remember
@ nanomad you're right, in movie my buffer meter is startin off green but it quickly turns red very fast and gives me a message about my recording stopping automatically. However, I began using ML with a class 6, 4mb SD card on the first Alpha test you released and had no prob with my photos or movie mode, but now with all the xtras like exp override and fps override etc, Im having this problem in movie mode. Even after you uploaded the new autoexec.bin.  Am I having issues because I have a class 6 and I need a class 10 SD card?
Other than my movie mode rec stopping Im not having any audio meter issues. Im going to Wally World to pick up a class 10, 16mb SD card just in case LOL
Thanks fellas, but how do I get to the ML menu in movie mode or how would one go about selecting Exp override for movie mode? Sorry if I seem a bit behind... Its Monday LOL
Quick question nanomad, are the features of exp.override supposed to be functional at all when I turn it to ON or Auto in any of the shooting modes, including movie mode? Bcuz it does not seem to be working at all for me in any mode certainly not movie mode, or am I doing something wrong???
     Has anybody else had this issue?       
     Also sometimes when I press the display button on my camera to find out more about the exp.override feature (Very cool help function by the way) my T3 crashes.
     I will keep you up on whats going on, thanks
Great job nanomad and all the other developers who are helping out... now time for a test drive!