Messages

1

Camera-specific Development / BUG

« on: December 06, 2013, 12:07:44 AM »

-activate crop mode
-change to picture mode
-it blocks and doesn´t shot
solution: turn off and on the camera.

2

Feature Requests / Re: [DONE] RAW overexposure warning

« on: October 27, 2013, 04:24:47 AM »

if i disable the liveview and the review (because eats a lot of battery in a canon 7d)
will ETTR work in a timelapse?

3

Archived porting threads / Re: Magic Lantern for 7D alpha 2

« on: October 27, 2013, 02:00:43 AM »

i can replicate the symtoms of sort of dead camera
i follow this guide:
http://www.magiclantern.fm/forum/index.php?topic=7464.0

update the firmware and camera went "dead"

Follow the same solution.
remove the CF card
remove the 2 batteries (no need of 5 minutes)

even if i use the cf card camera just froze. no lcd, nothing. like dead.

careful.
isn´t the CF. is posible that magic lantern.

4

Camera-specific Development / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]

« on: October 15, 2013, 09:07:40 AM »

any progress with the pink dots in raw video?

also got an error while recording raw video. (it just switch to normal video but i can´t replicate again)

Crashlog
ASSERT: !IS_ERROR(semErr)
at ./EekoApp/Color/WB/LV/LvWbAlgorWrap.c:522, task CLR_CALC
lv:1 mode:3


Magic Lantern version : v2.3.NEXT.2013Oct15.650D104
Mercurial changeset   : 33769b32b723 (unified) tip
Built on 2013-10-15 00:55:14 UTC by jenkins@magiclantern.fm.
Free Memory  : 136K + 3593K

log
Tue Oct 15 01:55:56 2013
   1029:  1263.415 [CAPD] PowerSaveTiming 2757 On:1193, Off:2695 H:528 Frame:0
   1033:  1307.906 [CAPD] PowerSaveTiming 2757 On:1193, Off:2695 H:528 Frame:0
   1039:  1334.100 [ENG] LockEng   [0x9daa10][Evf]
   1040:  1334.271 [ENG] LockEng   [0x9dab04][Evf]
   1041:  1334.760 [ENG] LockEng   [0x9dab48][Evf]
   1042:  1336.927 [ENG] LockEng   [0x9dac88][Evf]
   1043:  1337.136 [ENG] LockEng   [0x9dacec][Evf]
   1044:  1337.344 [ENG] LockEng   [0x9dade8][Evf]
   1045:  1337.617 [ENG] LockEng   [0x9dae50][Evf]
   1046:  1337.721 [ENG] LockEng   [0x9daebc][Evf]
   1047:  1337.882 [ENG] LockEng   [0x9daefc][Evf]
   1048:  1338.030 [ENG] LockEng   [0x9daf84][Evf]
   1049:  1339.084 [ENG] LockEng   [0x9dafd0][Evf]
   1057:  1353.390 [LV_AF_PATH]WriteInteg Lated!!!
   1058:  1353.457 ERROR [LV_AF_PATH]Limit Error (FES) !!!
   1067:  1382.309 [ENG] LockEng   [0x6ef510][LVFACE]
   1069:  1383.019 [GRAPH]CtrlSrv GuiCalculateRegularHistData(2652)
   1071:  1424.698 TVAF_EVAL_SINGLE
   1074:  1425.876 --  BadFrame --
   1077:  1471.531 --  BadFrame --
   1078:  1477.244 [LVCDEV] DF 43Hz:   0 50Hz:   0 60Hz:   0 74Hz:   0
   1079:  1477.282 [LVCDEV] ->FlickerStatus=0(Loop=0)
   1080:  1478.019 [GRAPH]CtrlSrv GuiCalculateRegularHistData(2652)
   1083:  1516.953 --  BadFrame --
   1086:  1562.484 --  BadFrame --
   1087:  1568.435 [LVCDEV] DF 43Hz:   0 50Hz:   0 60Hz:   0 74Hz:   0
   1088:  1568.469 [LVCDEV] ->FlickerStatus=0(Loop=1)
   1092:  1607.944 --  BadFrame --
   1094:  1609.914 [AEWB]MSLens:1,FR:30(22,22),Sensor:0,ServoAF:1 = Dig:0
   1098:  1653.515 --  BadFrame --
   1099:  1655.645 [BIND] bindReceiveSwitch (38, 1)
   1100:  1655.675 [BIND] COM_SW_SOMETHING
   1101:  1655.724 [GUI_E] GUI_Control:82 0x0
   1102:  1655.801 [BIND] bindReceiveSwitch (0, 1)
   1103:  1655.833 [GUI_E] GUI_Control:6 0x0
   1104:  1659.926 [LVCDEV] DF 43Hz:   0 50Hz:   0 60Hz:   0 74Hz:   0
   1105:  1659.962 [LVCDEV] ->FlickerStatus=0(Loop=2)
   1106:  1660.360 [GUI_M] GUICMD_PRESS_BUTTON_SOMETHING(0x0)
   1107:  1661.054 [GUI] PROP_LV_EXPOSURE_MODE [16]
   1115:  1749.751 [LVCDEV] DF 43Hz:   0 50Hz:   0 60Hz:   0 74Hz:   0
   1116:  1749.787 [LVCDEV] ->FlickerStatus=0(Loop=3)
   1124:  1841.271 [LVCDEV] DF 43Hz:   0 50Hz:   0 60Hz:   0 74Hz:   0
   1125:  1841.307 [LVCDEV] ->FlickerStatus=0(Loop=4)
   1126:  1841.356 [LVCDEV] Flicker Detect Complete:0
   1132:  1842.040 !!! icSetSearchFrameAction !!!
   1140:  1843.753 [GRAPH]CtrlSrv GuiCalculateRegularHistData(2652)
   1151:  1880.598 [ENG] UnLockEng [0x9dafd0][Evf]
   1152:  1881.162 [ENG] UnLockEng [0x9daf84][Evf]
   1153:  1881.312 [ENG] UnLockEng [0x9dab48][Evf]
   1154:  1881.555 [ENG] UnLockEng [0x9dac88][Evf]
   1155:  1881.648 [ENG] UnLockEng [0x9dacec][Evf]
   1156:  1881.788 [ENG] UnLockEng [0x9dab04][Evf]
   1157:  1881.906 [ENG] UnLockEng [0x9daa10][Evf]
   1158:  1882.077 [ENG] UnLockEng [0x9dade8][Evf]
   1159:  1882.215 [ENG] UnLockEng [0x9dae50][Evf]
   1160:  1882.334 [ENG] UnLockEng [0x9daebc][Evf]
   1161:  1882.453 [ENG] UnLockEng [0x9daefc][Evf]
   1168:  1882.908 [ENG] LockEng   [0x707170][Evf]
   1181:  1884.242 [AEWB]MSLens:1,FR:30(30,30),Sensor:0,ServoAF:1 = Dig:0
   1191:  1899.348 [ENG] UnLockEng [0x707170][Evf]
   1192:  1899.701 [CAPD] PowerSaveTiming 2022 On:1193, Off:1960 H:528 Frame:1
   1197:  1925.488 [ENG] LockEng   [0xa617f8][Evf]
   1198:  1925.647 [ENG] LockEng   [0xa6188c][Evf]
   1199:  1926.101 [ENG] LockEng   [0xa618d0][Evf]
   1200:  1928.284 [ENG] LockEng   [0xa61950][Evf]
   1201:  1928.508 [ENG] LockEng   [0xa61994][Evf]
   1202:  1928.701 [ENG] LockEng   [0xa619f0][Evf]
   1203:  1928.860 [ENG] LockEng   [0xa61a3c][Evf]
   1204:  1928.995 [ENG] LockEng   [0xa61a7c][Evf]
   1205:  1929.141 [ENG] LockEng   [0xa61ac4][Evf]
   1206:  1930.153 [ENG] LockEng   [0xa61b10][Evf]
   1207:  1930.308 [SAF]  WARNING >> Sequence Err: SAF_SetupCaptureForMovie 1
   1208:  1930.417 [ENG] UnLockEng [0x699a3c][Evf]
   1215:  1944.937 [LV_AF_PATH]WriteInteg Lated!!!
   1216:  1945.009 ERROR [LV_AF_PATH]Limit Error (FES) !!!
   1227:  1962.858 [GRAPH]CtrlSrv GuiCalculateRegularHistData(2652)
   1228:  1963.446 [GUI] CalcLvVisibleAreaSize X(40) Y(0) W(640) H(480)
   1229:  1963.468 [GUI] Avail_VisibleArea IW(720)IH(480)
   1230:  1963.489 [GUI] X(40)Y(0)AW(640)AH(480)
   1231:  1963.522 [GUI] Available_fVisibleFrame(1)
   1232:  1963.541 [GUI] Available_dwFrameType(2)
   1234:  1993.194 --  BadFrame --
   1235:  1995.698 [GUI] PROP_LV_EXPOSURE_MODE [17]
   1236:  2002.664 [GUI] SubMovieAspectLeftFrame X(0) Y(0) W(40) H(480)
   1237:  2005.955 [GUI] SubMovieAspectLeftLine X(36) Y(0) W(4) H(480)
   1238:  2006.139 [GUI] SubMovieAspectRightFrame X(680) Y(0) W(40) H(480)
   1239:  2008.962 [GUI] SubMovieAspectRightLine X(680) Y(0) W(4) H(480)
   1240:  2009.208 [GUI] SubMovieAspectUpperLine X(36) Y(-4) W(648) H(4)
   1241:  2009.359 [GUI] SubMovieAspectDownLine X(36) Y(480) W(648) H(4)
   1243:  2026.420 --  BadFrame --
   1244:  2030.392 [GRAPH]CtrlSrv GuiCalculateRegularHistData(2652)
   1245:  2037.448 [GUI_E] GUI_Control:-7 0x0
   1255:  2129.191 [AEWB]MSLens:1,FR:30(30,30),Sensor:0,ServoAF:1 = Dig:0
 

5

Camera-specific Development / Re: Canon 650D 1.0.4 [Status: Alpha]

« on: September 15, 2013, 11:21:29 PM »

crash log with dual iso activated. start the camera in some flash mode after some ph error
Sat Sep 14 19:29:10 2013
      0:    33.042 [STARTUP]
K301 ICU Firmware Version 1.0.4 ( 5.6.4 )
      1:    33.073 [STARTUP]
ICU Release DateTime 2013.04.16 08:40:21
      2:    35.149 [SEQ] seqEventDispatch (Startup, 0)
      3:    35.175 [STARTUP] startupEntry
      4:    35.251 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x42000000
      5:    35.947 [PROPAD] SerialFlash Packages!! 0x10000
      6:    46.434 [STARTUP] InitializeIntercom
      7:    46.687 [STARTUP] InitializeIntercom End(0x0)
      8:    51.462 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
      9:    51.620 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     10:    51.644 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     11:    51.746 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     12:    51.803 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     13:    51.823 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     14:    51.847 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     15:    51.870 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     16:    51.891 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     17:    51.911 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     18:    51.933 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     19:    51.954 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     20:    52.023 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     21:    52.095 [PROPAD] ERROR SIZE SetPropertyData ID (0) = 0x02060019(24)(
     22:    52.132 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     23:    52.190 [PROPAD] ERROR SIZE SetPropertyData ID (0) = 0x0206001A(24)(
     24:    52.227 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     25:    52.283 [PROPAD] ERROR SIZE SetPropertyData ID (0) = 0x0206001B(24)(
     26:    52.316 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     27:    52.371 [PROPAD] ERROR SIZE SetPropertyData ID (0) = 0x0206001C(24)(
     28:    52.406 [PROPAD] ERROR SearchFromProperty DataType = 0x00000000(L:2673)
     29:    52.465 [PROPAD] ERROR SIZE SetPropertyData ID (0) = 0x02060020(24)(
     30:    53.377 [PROPAD] ERROR SIZE SetPropertyData ID (0) = 0x02060019(24)(
     31:    53.481 [PROPAD] ERROR SIZE SetPropertyData ID (0) = 0x0206001A(24)(
     32:    53.570 [PROPAD] ERROR SIZE SetPropertyData ID (0) = 0x0206001B(24)(
     33:    53.658 [PROPAD] ERROR SIZE SetPropertyData ID (0) = 0x0206001C(24)(
     34:    53.741 [PROPAD] ERROR SIZE SetPropertyData ID (0) = 0x02060020(24)(
     35:    88.785 [PROPST] CLR Adjective & Situation : AEMode -> StartupCondition
     36:    95.568 [PROPAD] SerialFlash Packages!! 0x7
     37:    96.224 [PROPAD] SerialFlash Packages!! 0x340000
     38:   125.902 [PROPAD] SerialFlash Packages!! 0x7
     39:   125.992 [STARTUP] startupPropAdminMain : End
     40:   126.058 [SEQ] seqEventDispatch (Startup, 1)
     41:   126.085 [STARTUP] startupPrepareProperty
     42:   128.040 [SEQ] seqEventDispatch (Startup, 2)
     43:   128.464 [RSC] hMemoryQueue (0x980010) hStorageQueue (0x9A0012)
     44:   129.705 [RSC] ### LIST 6 0 6 ###
     45:   140.967 [JOB] InitializeJobClass (ID = 14388, Num = 13)
     46:   143.047 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     47:   145.033 [JOB] InitializeInnerDevelopJobClass (ID = 14388, Num = 16)
     48:   145.060 [JOB] InitializeHDRShootJobClass ( Num = 12 )
     49:   145.083 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 32 )
     50:   145.105 [JOB] InitializeGISShootJobClass ( Num = 12 )
     51:   145.130 [JOB] InitializeGISSaveAndEndJobClass ( Num = 26, 32 )
     52:   147.546 [RTC] ChangePropertyCBR 0x0, 0x0
     53:   147.930 [RTC] RTC_Permit 0x20
     54:   148.967 [RTC] InitializeRTCDriver 0x20, 0xff130774
     55:   149.695 [DOS]threshold 0x37a 0x35c
     56:   154.291 [SND] Seq LPC fin
     57:   154.668 [SHTRD] [MNAV] MEMNAVI_Initialize
     58:   154.950 [SHTRD] [MNAV] MEMNAVI_SetMemoryMap: 1
     59:   156.859 [ENG] [ENGIO](Addr:0x41400000, Data:0x   44000)
     60:   160.736 [ENAV] EEKO_NAVI_Initialize[START]
     61:   161.066 [ENAV] EekoNavi_InitializeEekoSystem
     62:   161.130 [ENAV] EEKO_NAVI_Initialize[FINISH]
     63:   193.985 [ENAV] Eeko Initialized:Async
     64:   194.061 [SHTP] spsInit
     65:   210.990 [FM] FM_RegisterSpaceNotifyCallback
     66:   211.030 [MRK] MRK_RegisterSpaceNotifyCallback
     67:   211.104 [FM] FM_RegisterSpaceNotifyCallback
     68:   211.260 [TERMINATE] SHUTDOWN init comp
     69:   211.310 [TERMINATE] Abort init comp
     70:   214.300 [MC] PROP_GUI_STATE 0
     71:   214.556 [MC] JobState 0
     72:   215.382 [MC] PROP_VARIANGLE_GUICTRL : Enable
     73:   215.438 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
     74:   215.574 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 5
     75:   216.495 [MC] regist master CardCover
     76:   222.740 [FM] fmPrepare : Completed
     77:   222.899 [SEQ] seqEventDispatch (Startup, 3)
     78:   224.908 [STARTUP] startupPrepareDevelop
     79:   225.005 [STARTUP] Set_AVS 60
     80:   225.353 [PRP] M:87 F:0 L:0 P:28 T:7
     81:   225.544 [STARTUP] update coded version.
     82:   225.639 [STARTUP] internal version 05:06:04:00:87:00:00:28
     83:   230.172 [SHTP] spsActivate
     84:   271.322 [MR] mvrChangeAckCBR : Video - Mode=0, Type=0, Rate=24, GOP=12
     85:   271.387 [MR] mvrChangeAckCBR : Sound Off
     86:   271.417 [MR] mvrChangeAckCBR : AE_MODE(12)
     87:   271.448 [MR] mvrChangeAckCBR : AE_MODE_MOVIE(0)
     88:   271.463 [MR] mvrChangeAckCBR : ISO(0)
     89:   271.620 [MR] mvrChangeAckCBR : MOVIE_REC_VOLUME(L:1 R:1)
     90:   271.693 [MR] mvrChangeAckCBR : WindCut Off
     91:   271.781 [MR] TimeCode Base:0,0,0,0
     92:   271.826 [MR] TimeCode Mode:0
     93:   271.875 [MR] TimeCode DropFrame Mode:0
     94:   271.918 [MR] TimeCode Disp Mode:0
     95:   271.949 [MR] PROP_FILE_PREFIX:IMG_
     96:   271.989 [MR] PROP_USER_FILE_PREFIX:IMG_,
     97:   272.017 [MR] PROP_USER_FILE_PREFIX:IMG,
     98:   272.064 [MR] PROP_SELECTED_FILE_PREFIX:MVI_,0
     99:   272.151 [MR] mvrChangeAckCBR : Attenuator Off
    100:   286.945 [LVDTS] WARN First Get DTS_GetAllRandomData
    101:   287.034 [LVGMT] [WAKU] TvAf+: 2 Win:0 [0 0 0 0 0] flg:0 4699
    102:   289.219 SPECIAL_OPTION AF MOVIE GERO OFF
    103:   290.058 [LVDTS] WARN First Get DTS_GetAllRandomData
    104:   290.927 [LVDTS] WARN First Get DTS_GetAllRandomData
    105:   290.970 [LVDTS] WARN First Get DTS_GetAllRandomData
    106:   291.402 [LVGMT]  PROP_LV_PROHIBIT_OUTPUT 0 0
    107:   291.459 [LVDTS] WARN First Get DTS_GetAllRandomData
    108:   291.663 [LVDTS] WARN First Get DTS_GetAllRandomData
    109:   291.705 [LVDTS] WARN First Get DTS_GetAllRandomData
    110:   292.039 [LVDTS] WARN First Get DTS_GetAllRandomData
    111:   292.083 [LVDTS] WARN First Get DTS_GetAllRandomData
    112:   294.208 [LVDTS] WARN First Get DTS_GetAllRandomData
    113:   294.259 [LVDTS] WARN First Get DTS_GetAllRandomData
    114:   296.207 [HPC] ReserveHPCopyChannel (0, 47)
    115:   298.396 [LVCOM] InitializeLiveViewDefectDetection
    116:   299.136 [LVCOM] ExecuteDefectMarge Start
    117:   299.231 [LVCOM] ExecuteDefectMarge End
    118:   300.983 [LVICV] icInitAction (state:1)
    119:   304.310 [LVDTS] WARN First Get DTS_GetAllRandomData
    120:   305.024 [LVDTS] WARN First Get DTS_GetAllRandomData
    121:   305.134 [LVDTS] WARN First Get DTS_GetAllRandomData
    122:   305.792 [AF] Ratio:30 Reboot:2 !!!
    123:   307.145 [LVDTS] WARN First Get DTS_GetAllRandomData
    124:   308.866 [LVDTS] WARN First Get DTS_GetAllRandomData
    125:   309.833 [STARTUP] startupPrepareRemote
    126:   311.123 [AUDIO] RegisterCBRSDIOCableConnect
    127:   328.280 [RMT] QuickTransmissionEnable (0, 1, 2, 2)
    128:   328.328 [RMT] PROP_CONNECT_TARGET (0x0 <= 0x0)
    129:   328.366 [RMT] PROP_CONNECT_TARGET_WFT (0x0 <= 0x0)
    130:   328.426 [RMT] PROP_WFT_SYSTEM : 0
    131:   328.756 [MAC] MAC_Initialize
    132:   329.141 [MAC] K_BOARDID4
    133:   329.179 [MAC] K_BOARDID3
    134:   329.209 [MAC] K_BOARDID2
    135:   329.243 [MAC] K_BOARDID1
    136:   329.447 [MAC] Key=0x0 Board=0x0 Body=0x7174af0b
    137:   329.949 [PTP] PSI UnlockTransImg : Trans List is NULL
    138:   329.986 [PTP] PSI TarminateTransImgList : SessionTarget [1]
    139:   330.011 [PTP] PSI TarminateTransImgList : Trans List is NULL
    140:   330.041 [RMT] rmtFreeStoredJob (0, 0)
    141:   330.150 [PTP] PSI UnlockTransImg : Trans List is NULL
    142:   330.171 [PTP] PSI TarminateTransImgList : SessionTarget [10]
    143:   330.191 [PTP] PSI TarminateTransImgList : Trans List is NULL
    144:   330.208 [RMT] rmtFreeStoredJob (0, 0)
    145:   330.291 [PTP] PSI DisconnectViewFinder
    146:   330.764 [PTP] PROP_SCREEN_SAVER 0
    147:   330.953 [MAGIC] SetPtpTransportResources:0,323b
    148:   687.144 [SD] sdSendOCR: CCS=1, S18A=1
    149:   687.250 [SD] Set 1.8V Signaling
    150:   722.049 [SD] CARD CAPACITY is 30436Mbyte( 62333952Sec )
    151:   740.570 [SD] SD_GetAccessMode=7
    152:   740.585 [SD] Set Hi-Speed Mode( 96MHz )
    153:   771.106 [FSU] fsuGetPart: Block(8192, 62325760, 62333952)
    154:   830.027 [FM] FileNo (DriveNo = 2, 4455 <-> 4457)
    155:   830.062 [FM] FreeCluster (DriveNo = 2, 781928 <-> 781926)
    156:   830.894 [FC] _FC_OpenCatalog : wNumOfDir 1
    157:   835.487 [MRK] MRK_Initialize
    158:   835.800 [MRK] mrkSetLockSemaphore
    159:   836.160 [MRK] MRK_PrepareMrkFileObject
    160:   839.473 [SEQ] seqEventDispatch (Startup, 4)
    161:   839.666 [DP] DP_Initialize()
    162:   840.425 [DP] Std T_PrintPage[0] T_PrintNo[0] R_PrintNo[0]
    163:   840.467 [DP] Std C_PrintNo[0] C_PrintPage[0], C_Copies[0]
    164:   840.580 [DP] Dp_SetPD_RegistApi Prev:0 New:0
    165:   840.998 [DP] PROP_CONNECT_TARGET [0x00000000]
    166:   841.151 [DP] RD_Cancel No Issue
    167:   841.413 [DP] [GYO]DpFunctionList[0x10117fff]
    168:   841.534 [DP] X FreeMem Address[0x00000000]
    169:   841.897 [INDEV] INDEV_Initialize
    170:   848.314 [HDMI] cec_initialize_reg_set : END
    171:   848.904 [HDMI] Logical Address Set : End
    172:   848.918 [HDMI] CEC DEVICE SETUP
    173:   849.374 [DISP] EV_CONNECT_HDMI BY HPD 0
    174:   864.915 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
    175:   864.978 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
    176:   897.221 [DP] DP_RegisterCBR() Id=1 Count:12
    177:   897.262 [DP] DP_RegisterCBR() Id=2 Count:12
    178:   897.294 [DP] DP_RegisterCBR() Id=4 Count:12
    179:   906.924 [GUI] MainEventHandler PROP_QR_DIDNOT_EXECUTE(0)(0)
    180:   909.200 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
    181:   947.908 [MR] mvrChangeAckCBR : Video - Mode=0, Type=0, Rate=24, GOP=12
    182:   949.506 [LVDTS] WARN First Get DTS_GetAllRandomData
    183:   949.560 [LVDTS] WARN First Get DTS_GetAllRandomData
    184:   950.302 [TCH]Active_Mode SetEnd
    185:   950.663 [TCH] [TCH]Variangle_State = 2
    186:   951.067 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
    187:   953.469 [MR] mvrChangeAckCBR : Video - Mode=0, Type=0, Rate=24, GOP=12
    188:   955.039 [LVDTS] WARN First Get DTS_GetAllRandomData
    189:   955.094 [LVDTS] WARN First Get DTS_GetAllRandomData
    190:   957.145 [MR_MOV] (Empty Func) MVW_RegisterXmpDataCallback
    191:   957.710 [HDMI] CEC OFF
    192:   959.920 [SEQ] seqEventDispatch (Startup, 5)
    193:   959.978 [STARTUP] startupInitializeComplete
    194:   960.035 [BIND] bindChangeModeCompleteCBR (0, 0, 0)
    195:   960.092 [MC] cam event guimode comp. 0
    196:   960.144 [BIND] bindChangeShootTypeCompleteCBR (0 => 0)
    197:   960.269 [BIND] PROP_STARTUP_CONDITION (1)
    198:   960.313 [BIND] GUI_STATE : IDLE (SW = 1, JOB = 0)
    199:   960.331 [GUI_E] GUI_ChangeMode:0
    200:   960.374 [GUI_E] GUI_Control:53 0x0
   

6

Camera-specific Development / Re: Canon 650D 1.0.4 [Status: Alpha]

« on: September 12, 2013, 11:21:33 PM »

crash log
ASSERT: err == SUCCESS
at GUI.c:679, task PropMgr
lv:0 mode:3


Magic Lantern version : v2.3.NEXT.2013Sep06.650D104
Mercurial changeset   : db3b7e1c3d59 (unified) tip
Built on 2013-09-06 09:32:33 UTC by root@ml-satriani.
Free Memory  : 208K + 3385K

7

Camera-specific Development / Re: Canon 650D 1.0.4 [Status: Alpha]

« on: August 07, 2013, 01:35:33 AM »

raw histogram in photo mode doesn´t appear or at least is extremely slow.
video mode it´s normal. maybe 1-2 second delay.

is it normal?

global draw all modes.
zebras : raw rgb
Histogram: rgb, lin, dots, raw
All others: off

8

Camera-specific Development / Re: Canon 650D 1.0.4 [Status: Alpha]

« on: August 05, 2013, 12:48:01 AM »

BUG:
when you select flash tweaks and 3rd p flash Live view on
the camera just freezes. it takes pictures but you can autofocus anymore. you have to turning off the camera.

you can replicate this even without external flash. just put live view and try to take a picture with that setting on.

9

Archived porting threads / Re: Canon 650D [Status: Alpha]

« on: June 22, 2013, 01:55:50 AM »

nanomad is it possible to make available the quick autofocus mode in video like canon 7d?
photo mode has it but if switched to video recording that function is lost and it´s useful.

10

Archived porting threads / Re: Canon 650D [Status: Alpha]

« on: June 18, 2013, 04:18:39 AM »

Thanks but it really seems dead. Are you sure you did nothing else?

A couple of things that may be the cause this:
-When i installed ML and did the firmware update it said it couldn't find any update.
-I set the fps override to 65fps
-Directly after the above step, under the FPS Override category i was switching between Accurate fps, 180d no yello effect (or whatever it was called) etc.

that happen to me once.

i just pulled of the battery and charge it 100%
then don´t enter sd card
and turn on the camera on other than manual mode. like program or auto etc.
turn in off and move the dial to manual and turn it on

format the sd card and install ml again.

11

Archived porting threads / Re: Canon 650D [Status: Alpha]

« on: June 10, 2013, 08:25:41 PM »

when i shoot a picture in video mode the raw files read it with 16:9. that´s a 15.1MP file, not 18MP.

there is a lightroom plugin to restore the original aspect ratio but needs to convert the image to dng and then it duplicates the file.
that´s a lot of work.

can magic lantern make something about this? maybe deactivate the function that gives 16:9 ratio to the metadata in the raw file in video mode.

12

Archived porting threads / Re: Canon 650D [Status: Alpha]

« on: June 10, 2013, 05:30:30 AM »

there is a bug when i activate raw video.
1. sometimes when you hit the button to stop the recording it doesn´t, so the normal hd video from canon starts. the raw video stops but still get buffering the raw video and then i can stop normal video.
the only way to do it is to turn it off.


2. also if you hit by mistake load modules two times, camera blocks and the camera has to be turned off. can be this prevented?

3. if i turn on fps overide to 24fps (23.976)  doesn´t record audio. can be this fixed please?

13

Camera-specific Development / Re: Canon 700D / T5i

« on: June 01, 2013, 07:34:07 AM »

great news!
Important thing for videographers here is to perform a benchmark of the sd card to confirm if it has the same limit of t4i.
can you share some info about that nanomad?

14

Archived porting threads / Re: Canon 650D [Status: Hello, world!]

« on: May 31, 2013, 02:48:18 AM »

Benchmark results seem to differ in photo and video mode ...
Sandisk 95 MByte/s, 8 GByte
I use this build:
https://dl.dropboxusercontent.com/sh/q1zrrlmy03psr2y/NoRx3aSzTl/ML_N_28.05.2013.zip



10 MByte/s more would be fine, but it seems the controller is the bottleneck.
Ciao, Walter

looks like with a t4i it´s best to get a 45MB/s  card because with a 95MB/s you don´t get better performance at all.
anyways it will be cool to know if t5i has the same limitation.
i think at least 10MB/s more will get the job done for 1280x720

15

Archived porting threads / Re: Canon 650D [Status: Hello, world!]

« on: May 30, 2013, 10:52:33 PM »

if useful i have some crash logs:
currently using the build of satriani.
works ok. but be careful i got a semibrick or err (i dont remember what number i just pull of the battery and all is allright)

if i use 24fps over ride i can obtain 600+ frames of 1280x720. That´s 3x times what i get the normal way. But it crashes if i choose other any option than optimized for low light.

1crash

ASSERT: 0
at ./Capture/Capture.c:509, task EventMgr
lv:0 mode:3
Magic Lantern version : v2.3.NEXT.2013May28.650D101
Mercurial changeset   : 87906563dde1 (unified) tip
Built on 2013-05-28 11:44:35 by root@magiclantern-VirtualBox.
Free Memory  : 106K + 3457K

2. crashes

ASSERT: !IS_ERROR(semErr)
at ./EekoApp/Color/WB/LV/LvWbAlgorWrap.c:522, task CLR_CALC
lv:1 mode:3
Magic Lantern version : v2.3.NEXT.2013May28.650D101
Mercurial changeset   : 87906563dde1 (unified) tip
Built on 2013-05-28 11:44:35 by root@magiclantern-VirtualBox.
Free Memory  : 106K + 3433K

2 crashes

ASSERT: !IS_ERROR(semErr)
at ./EekoApp/Color/WB/LV/LvWbAlgorWrap.c:522, task CLR_CALC
lv:0 mode:3
Magic Lantern version : v2.3.NEXT.2013May28.650D101
Mercurial changeset   : 87906563dde1 (unified) tip
Built on 2013-05-28 11:44:35 by root@magiclantern-VirtualBox.
Free Memory  : 106K + 3464K

assert log for all crashes:

ML ASSERT:
PROP_LEN(206000a) correct:4 called:18
at ../../src/property.c:308 (prop_request_change), task GuiMainTask
lv:1 mode:3


Magic Lantern version : v2.3.NEXT.2013May28.650D101
Mercurial changeset   : 87906563dde1 (unified) tip
Built on 2013-05-28 11:44:35 by root@magiclantern-VirtualBox.
Free Memory  : 106K + 3463K

LOG000.LOG

Wed May 29 04:47:30 2013
      0:    33.238 [STARTUP]
K301 ICU Firmware Version 1.0.1 ( 5.5.9 )
      1:    33.271 [STARTUP]
ICU Release DateTime 2012.05.24 17:48:32
      2:    35.259 [SEQ] seqEventDispatch (Startup, 0)
      3:    35.286 [STARTUP] startupEntry
      4:    35.367 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x42000000
      5:    36.066 [PROPAD] SerialFlash Packages!! 0x10000
      6:    46.584 [STARTUP] InitializeIntercom
      7:    46.839 [STARTUP] InitializeIntercom End(0x0)
      8:    95.605 [PROPAD] SerialFlash Packages!! 0x7
      9:    96.266 [PROPAD] SerialFlash Packages!! 0x340000
     10:   125.867 [PROPAD] SerialFlash Packages!! 0x7
     11:   125.963 [STARTUP] startupPropAdminMain : End
     12:   126.026 [SEQ] seqEventDispatch (Startup, 1)
     13:   126.055 [STARTUP] startupPrepareProperty
     14:   127.855 [SEQ] seqEventDispatch (Startup, 2)
     15:   128.284 [RSC] hMemoryQueue (0x980010) hStorageQueue (0x9A0012)
     16:   129.522 [RSC] ### LIST 6 0 6 ###
     17:   141.284 [JOB] InitializeJobClass (ID = 5592, Num = 13)
     18:   143.279 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     19:   145.193 [JOB] InitializeInnerDevelopJobClass (ID = 5592, Num = 16)
     20:   145.224 [JOB] InitializeHDRShootJobClass ( Num = 12 )
     21:   145.249 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 32 )
     22:   145.273 [JOB] InitializeGISShootJobClass ( Num = 12 )
     23:   145.300 [JOB] InitializeGISSaveAndEndJobClass ( Num = 26, 32 )
     24:   147.713 [RTC] ChangePropertyCBR 0x0, 0x0
     25:   148.106 [RTC] RTC_Permit 0x20
     26:   149.149 [RTC] InitializeRTCDriver 0x20, 0xff1306dc
     27:   149.898 [DOS]threshold 0x37a 0x35c
     28:   154.482 [SND] Seq LPC fin
     29:   154.845 [SHTRD] [MNAV] MEMNAVI_Initialize
     30:   155.132 [SHTRD] [MNAV] MEMNAVI_SetMemoryMap: 1
     31:   157.095 [ENG] [ENGIO](Addr:0x41400000, Data:0x   44000)
     32:   160.928 [ENAV] EEKO_NAVI_Initialize[START]
     33:   161.255 [ENAV] EekoNavi_InitializeEekoSystem
     34:   161.313 [ENAV] EEKO_NAVI_Initialize[FINISH]
     35:   194.267 [ENAV] Eeko Initialized:Async
     36:   194.343 [SHTP] spsInit
     37:   211.330 [FM] FM_RegisterSpaceNotifyCallback
     38:   211.365 [MRK] MRK_RegisterSpaceNotifyCallback
     39:   211.433 [FM] FM_RegisterSpaceNotifyCallback
     40:   211.598 [TERMINATE] SHUTDOWN init comp
     41:   211.652 [TERMINATE] Abort init comp
     42:   214.682 [MC] PROP_GUI_STATE 0
     43:   214.935 [MC] JobState 0
     44:   215.720 [MC] PROP_VARIANGLE_GUICTRL : Enable
     45:   215.780 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
     46:   215.906 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 9
     47:   216.873 [MC] regist master CardCover
     48:   557.153 [SD] sdSendOCR: 1.8V Signaling Card
     49:   558.375 [SD] sdSendOCR: Hi-Capacity Card
     50:   566.787 [SD] Set 1.8V Signaling
     51:   601.640 [SD] CARD CAPACITY is 30436Mbyte( 62333952Sec )
   42:   214.682 [MC] PROP_GUI_STATE 0
     43:   214.935 [MC] JobState 0
     44:   215.720 [MC

Benchmarks with a sandisk 45MB/s


Please anyone with a 95MB/s make a benchmark a post it, will be helpful to see what buffer are better and if by any chance there is at least 10MB more of performance over a 45MBs

16

Hardware and Accessories / This gadget is maybe a Wireless solution to Raw video?

« on: May 29, 2013, 07:52:55 AM »

I just saw this gadget http://vimeo.com/64769471, looks pretty interesting because it seems that you can connect an SSD via USB connection and wiressly.
and  it´s capable of  stream or transfer recorded video to mobile device.

Maybe magic lantern can do something with this?:

500-Image Buffer for Continuous Shooting
802.11b/g/n Wi-Fi
Data Rate: 20Mbps (2MB/s maybe not enough)
For iPad, iPhone, Mac
Attaches via Hotshoe or Tripod Mount
USB 2.0 Interface
Photoshop, Bridge, Lightroom Integration

(my english isnt that good to describe it so i just copy paste from their website)
"iUSBportCAMERA turns your mobile device into both an advanced remote control as well as a wireless high resolution viewer for your DSLR camera. Allow your clients to instantly see photos on the big screen as you shoot. Also perfect for those challenging shots when you cannot be right next to your camera but still wish to have full control over it. Shoot photos and videos with live view and touch focusing while having access to all camera settings as though you are right next to it."

17

Archived porting threads / Re: Canon 650D [Status: Hello, world!]

« on: May 29, 2013, 04:58:25 AM »

You need to compile build from a last source or you can feel free an use build compiled by me here.
Set a boot flags an your SD and extract zip to SD. Works very well.
And please diligently and extensively report the bugs

i just tried your build. thanks for the compile.

bugs:
1. one crash when i set the picture style in magic lantern menu, (the camera goes crazy)

Code: [Select]

ASSERT: 0
at ./Capture/Capture.c:509, task EventMgr
lv:0 mode:3
Magic Lantern version : v2.3.NEXT.2013May28.650D101
Mercurial changeset   : 87906563dde1 (unified) tip
Built on 2013-05-28 11:44:35 by root@magiclantern-VirtualBox.
Free Memory  : 106K + 3457K
2. when i turned the lcd the face tracking focus is mirrored (only with magic lantern)


and for RAW video
1280x720: goes until 271 frames with a sandisk 45MB/s
1728x972: 38 frames
1440x810:83 frames
1320x742: 112

aspect ratio 3:2
1728x1152: 24 frames
1600x1066:38 frames
1440x960: 46
1280x854:103

aspect ratio 1.1
960x960: 373
1280x1158:43

aspect ratio: 2.35:1
1728x736:65 frames

aspect ratio 3:1
1728x576: 159 frames

and the most important thing: for now every raw video i shot gives this pattern of dots:

18

Archived porting threads / Re: Canon 650D [Status: Hello, world!]

« on: May 29, 2013, 01:24:48 AM »

You need to compile build from a last source or you can feel free an use build compiled by me here.
Set a boot flags an your SD and extract zip to SD. Works very well.
And please diligently and extensively report the bugs

testing here
Achieving 200 frames at 1280x720
34MB/s with my 45MB sandisk.
all other ML things turned off (zebras, focus peaking etc)

below that i can record without problems.
higher than that i can only do like between 2 seconds and 4 seconds. the best i can top it´s like 45MB


what´s the best workflow with this raw?
can anybody share some good tutorial

19

Archived porting threads / Re: Canon 650D [Status: Hello, world!]

« on: May 28, 2013, 04:34:37 AM »

same 650D.
i found the [REC key] under the MOVIE section, and set it to [halfshutter],and it worked, with a wired shutter trigger or just the shutter on the camera.

BUT i noticed that the instructions below says [Start recording by press shutter halfway. Wired remote]

@nanomad    does that mean a wired remote works with this feature but a wireless one doesn't?

i guess there must be some difference of the operating principles between the wired and wireless remote/shutter trigger

i just confirmed this.
it works ok wiressly!
nice

20

Archived porting threads / Re: Canon 650D [Status: Hello, world!]

« on: May 27, 2013, 08:57:26 PM »

i tried to google it and figured out it is a wireless trigger,im not sure whether a wireless trigger works but if that still needs to be pluged in the jack on the side of the camera, it would work cuz i tried my wire trigger?cable trigger?(dunno what to call it for my poor vocabulary.....) just now.it worked and started recording video when i half push the shutter,

i have this one :http://www.amazon.com/gp/product/B0050E7OSM/ref=oh_details_o00_s00_i02?ie=UTF8&psc=1

i want to try that but i can´t find the option in this prealpha.
what camera did you use? i have a 650d

21

Archived porting threads / Re: Canon 650D [Status: Hello, world!]

« on: May 27, 2013, 02:37:39 AM »

can i activate Movie REC key in this prealpha?
i was trying to find it but it seems it lacks this feature. want to try if it´s possible to trigger video with a 603 younguo.

22

Archived porting threads / Re: Canon 650D [Status: Hello, world!]

« on: May 25, 2013, 05:16:08 AM »

i think that anyform of raw video in a canon rebel will push the camera and cinema industry to unknown levels.
is it possible that camera makers like sony or panasonic will stay quiet and decide to not implement camera raw in their cameras next year? i don´think so. they have to. it´s an obligation now that currently with a hack, canon has the upperhand at least at the midrange.

just hack one rebel one and things are going to get very entertaining in the industry.

23

Archived porting threads / Re: Canon 650D [Status: Hello, world!]

« on: May 22, 2013, 03:05:03 AM »

No. This appears to be a limitation of the SD hardware in the 650D.  ~40MB/s

in the specifications of t4i it says that it supports the latest  UHS-I SDHC cards.

here http://www.imaging-resource.com/PRODS/canon-t4i/canon-t4iA6.HTM it says that with a SanDisk Extreme Pro 95MB/s the Time per shot, averaged over 6 shot buffer capacity.
so if we are making something like it´s the 1/9 of a default raw wich is 18MP maybe we can dream a little of taking HD video wich is only 2MP.

24

Archived porting threads / Re: Canon 650D [Status: Hello, world!]

« on: May 21, 2013, 10:16:42 PM »

That's as good as it gets on the 650D, so yes. That card is ok

will be possible with a SanDisk Extreme Pro 95MB/s UHS-I to get double speed? so maybe we can achieve at least 720p at 90Mbs.?

25

Archived porting threads / Re: Canon 650D [Status: Hello, world!]

« on: May 06, 2013, 03:45:02 AM »

be careful with FPS overide!!!!
for some reason this option is turned on the first time you install the prealpha in your camera.

i was checking options like 1 minute and the screen began to show banding.
red lines across!!!
i´ve seen this in another camera and this symptom isn´t good. it can damage your camera.

so be careful and wait for a stable release and please turn it off as soon as you install this prealpha.


anyways.
magic zoom isn´t working good.
even when is the only feauture activated and without sound recording.