Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - aedipuss

Pages: 1 [2] 3 4
26
@ kriso - i believe the answer is back in the thread if you read through it.  iirc the answer at least for the audio part is it's probably not going to happen for any of the digic 5 cameras.

27
let me add to that - they were clean installs.  format a card and start fresh with no possible leftover files from other builds. and used the update firmware route.

28
@deafeyejedi - it was all the test builds iirc nov28 and nov29.  all i did was install a test build, use the canon menu to clear all settings, and turn the switch to movie mode and they would crash.

29
@nikfreak - that was JUST in the test builds.  beta 2b nov26 works here, even with all modules on, auto iso, dual iso and turning on movie mode.  no crashes.

30
@ OlRivrRat it also happens if you have auto iso on and dual iso off.  it also happens if you are trying to record standard mov mp4 and not mlv or raw. it also happens with absolutely no ml modules turned on.

31
sorry for being a pain in the arse but i didn't think i was crazy. 

@nitfreak - please keep up the great work, my cameras would be nikons if it weren't for guys like you.  i enjoy the extra features very much!  thx again.

32
Camera-specific discussion / Re: Canon 70D (Beta-2b / 26th Nov)
« on: December 01, 2015, 05:18:34 PM »
here's a video of what happens on my camera with 29nov ml


and the associated error logs

www.minidv2dvd.com/temp/error_log.zip


ok i give, what part of the vimeo url do you put in the tags to get it to show up?  never mind you just have to http not https

33
Camera-specific discussion / Re: Canon 70D (Beta-2b / 26th Nov)
« on: November 30, 2015, 08:11:12 PM »
@Walter Schulz - the code tag is normally used for html not text.  other than you don't like to scroll is there a reason?

34
Camera-specific discussion / Re: Canon 70D (Beta-2b / 26th Nov)
« on: November 30, 2015, 07:10:39 PM »
ok, not sure what was wrong yesterday but 29nov "A" will install firmware on card no matter how card is formatted today. 

but each time, all it takes is moving the switch to movie mode and it crashes.

latest error logs
Code: [Select]
ASSERT: 0
at ./Memory/Memory.c:575, AeWb:3db28
lv:1 mode:3


Magic Lantern version : Nightly.2015Nov29.70D111A
Mercurial changeset   : 0a981f3d2abf+ (70D-merge-dryos-hooks) tip
Built on 2015-11-29 11:22:59 UTC by ml@ml-pc.
Free Memory  : 238K + 2466K


Mon Nov 30 14:03:46 2015
      0:    48.278 [STARTUP]
K325 ICU Firmware Version 1.1.1 ( 8.1.3 )
      1:    48.300 [STARTUP]
ICU Release DateTime 2013.09.25 13:56:21
      2:    49.823 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41744000
      3:    50.477 [PROPAD] SerialFlash Packages!! 0x10000
      4:    51.299 [SEQ] seqEventDispatch (Startup, 0)
      5:    51.320 [STARTUP] startupEntry
      6:   105.405 [PROPAD] SerialFlash Packages!! 0x7
      7:   105.574 [STARTUP] startupPropAdminMain : End
      8:   105.675 [SEQ ERROR] NotifyComplete (Cur = 1, 0x2, Flag = 0x20000000)
      9:   146.635 [SEQ] seqEventDispatch (Startup, 1)
     10:   146.673 [STARTUP] startupPrepareProperty
     11:   150.378 [RTC] PROPAD_GetPropertyData : PROP_RTC 0xa0
     12:   151.766 [RTC] ChangePropertyCBR 0x0, 0x4000
     13:   152.013 [RTC] RTC_Permit 0x20
     14:   152.672 [SND] Seq LPC fin
     15:   153.100 [RSC] hMemoryQueue (0x800010) hStorageQueue (0x820012)
     16:   154.085 [RSC] MemoryStatusMasterResultCBR
     17:   183.004 [FM] FM_RegisterSpaceNotifyCallback
     18:   183.046 [MRK] MRK_RegisterSpaceNotifyCallback
     19:   183.096 [AUDIO] [GPS] GPS_RegisterSpaceNotifyCallback
     20:   183.158 [FM] FM_RegisterSpaceNotifyCallback
     21:   183.462 [JOB] InitializeJobClass (ID = 1964, Num = 13)
     22:   192.703 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     23:   194.876 [JOB] InitializeInnerDevelopJobClass (ID = 1964, Num = 16)
     24:   194.911 [JOB] InitializeMultipleExposureShootJobClass ( Num = 27,11 )
     25:   194.933 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 13 )
     26:   194.954 [JOB] InitializeHDRShootJobClass ( Num = 12 )
     27:   194.974 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 34 )
     28:   194.996 [JOB] InitializeGISShootJobClass ( Num = 12 )
     29:   195.020 [JOB] InitializeGISSaveAndEndJobClass ( Num = 25, 31 )
     30:   195.131 [TERMINATE] SHUTDOWN init comp
     31:   195.187 [TERMINATE] Abort init comp
     32:   202.715 [FM] fmPrepare : Completed
     33:   202.857 [SEQ] seqEventDispatch (Startup, 2)
     34:   203.238 [SHTRD] [MNAV]Init
     35:   203.448 [SHTRD] [MNAV]SetMMap:1
     36:   206.585 [ENG] [ENGIO](Addr:0x41700000, Data:0x   44000)
     37:   251.970 [SEQ] seqEventDispatch (Startup, 3)
     38:   253.855 [MC] PROP_GUI_STATE 0
     39:   254.936 [MC] PROP_VARIANGLE_GUICTRL : Enable
     40:   254.997 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
     41:   255.142 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 5
     42:   255.290 [MC] PROP_LCD_OFFON_BUTTON : 2
     43:   256.219 [MC] regist master CardCover
     44:   258.791 [PRP] M:B1 F:0 L:0 P:32 T:8
     45:   258.962 [STARTUP] update coded version.
     46:   259.032 [STARTUP] internal version 08:01:03:b1:00:00:32:08:00:00:d0:d0:d0
     47:   260.477 [STARTUP] Set_AVS 60
     48:   263.495 [STARTUP] startupPrepareDevelop
     49:   266.887 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41b2c000
     50:   267.584 [PROPAD] SerialFlash Packages!! 0x490000
     51:   301.699 [PROPAD] SerialFlash Packages!! 0x7
     52:   303.111 [MAC] MAC_Initialize
     53:   303.452 [MAC] K_BOARDID4
     54:   303.485 [MAC] K_BOARDID3
     55:   303.519 [MAC] K_BOARDID2
     56:   303.548 [MAC] K_BOARDID1
     57:   303.718 [MAC] Key=0x0 Board=0x0 Body=0x15453eb7
     58:   313.507 [SHTP] RegRPCHandler Master
     59:   339.493 [MR] TimeCode Mode:1
     60:   339.596 [MR] TimeCode DropFrame Mode:1
     61:   339.641 [MR] PROP_MOVIE_PARAM:0
     62:   345.101 [HPC] ReserveHPCopyChannel (1, 116)
     63:   357.226 [MR] encdrwrapHPCopyAsyncCBR
     64:   360.161 [LVDTS] WARN First Get DTS_GetAllRandomData
     65:   382.218 [STARTUP] startupPrepareRemote
     66:   383.067 [AUDIO] RegisterCBRSDIOCableConnect
     67:   384.944 [COM] PackHeap 79491c,79491c,0
     68:   385.330 [COM] Local Heap warning hCom[0]size[262144]
     69:   395.047 [WFT] PROP_ADAPTER_DEVICE_ACTIVE: Can Not Change(0) Connect(0)
     70:   395.843 [WFT] InitializeAdapterControl END
     71:   404.521 [RMT] QuickTransmissionEnable (0, 1, 2, 2)
     72:   404.573 [RMT] PROP_CONNECT_TARGET (0x0 <= 0x0)
     73:   404.860 [RMT] PROP_CONNECT_TARGET_WFT (0x0 <= 0x0)
     74:   404.902 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
     75:   406.648 [PTPCOM] SetPtpTransportResources:0,3253
     76:   421.459 [WFT] Regist PropCBR PROP_WFT_BLUETOOTH
     77:   759.957 [SD] sdSendOCR: CCS=1, S18A=1
     78:   760.063 [SD] Set 1.8V Signaling
     79:   793.456 [SD] sdSendCommand: CMD2 Retry=2(SDSTS_ED)
     80:   796.643 [SD] CARD CAPACITY is 61087Mbyte( 125106176Sec )
     81:   809.046 [SD] SD_GetAccessMode=7
     82:   809.059 [SD] Set Hi-Speed Mode( 96MHz )
     83:   821.381 [FSU] fsuGetPart: Block(32768, 125073408, 125106176)
     84:   875.350 [FM] FileNo (DriveNo = 2, 0 <-> 1977)
     85:   875.399 [FM] FreeCluster (DriveNo = 2, 488111 <-> 488367)
     86:   876.501 [FC] _FC_OpenCatalog : wNumOfDir 1
     87:   889.339 [FM] [GPS] GPS_Initialize (36, 25)
     88:   889.896 [MRK] MRK_Initialize
     89:   890.167 [MRK] mrkSetLockSemaphore
     90:   890.534 [MRK] MRK_PrepareMrkFileObject
     91:   893.621 [SEQ] seqEventDispatch (Startup, 4)
     92:   893.805 [DP] DP_Initialize()
     93:   894.478 [DP] Std T_PrintPage[0] T_PrintNo[0] R_PrintNo[0]
     94:   894.510 [DP] Std C_PrintNo[0] C_PrintPage[0], C_Copies[0]
     95:   894.600 [DP] Dp_SetPD_RegistApi Prev:0 New:0
     96:   894.993 [DP] PROP_CONNECT_TARGET [0x00000000]
     97:   895.028 [DP] DpConnectionTarget [0x00000000]
     98:   895.078 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
     99:   895.104 [DP] DpConnectionTarget [0x00000000]
    100:   895.157 [DP] LOGICAL_CONNECT [0x00000000]
    101:   895.188 [DP] DpsTerminate()
    102:   895.274 [DP] PROP_PHYSICAL_CONNECT [0x00000000]
    103:   895.300 [DP] RD_Cancel No Issue
    104:   895.329 [DP] DpPhysicalConnectFlg [0x00000000]
    105:   895.379 [DP] PROP_INNER_PHYSICAL_CONNECT [0x00000000]
    106:   895.394 [DP] RD_Cancel No Issue
    107:   895.420 [DP] DpPhysicalConnectFlg [0x00000000]
    108:   895.458 [DP] PROP_NETWORK_SYSTEM [0]
    109:   895.482 [DP] PROP_WIFI_SETTING [0]
    110:   895.740 [DP] [GYO]DpFunctionList[0x10117fff]
    111:   895.857 [DP] X FreeMem Address[0x00000000]
    112:   896.175 [INDEV] INDEV_Initialize
    113:   900.713 [HDMI] DisconnectHDMI : Not Connected
    114:   911.484 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
    115:   911.563 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
    116:   940.645 [DP] DP_RegisterCBR() Id=1 Count:12
    117:   940.684 [DP] DP_RegisterCBR() Id=2 Count:12
    118:   940.705 [DP] DP_RegisterCBR() Id=4 Count:12
    119:   940.824 [MR] tcmClockEnd
    120:   941.476 [DISP] SetBacklightBrightness called
    121:   952.413 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
    122:   965.480 [MR] PROP_MOVIE_PARAM:0
    123:   967.848 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
    124:   970.100 [MR] PROP_MOVIE_PARAM:0
    125:   973.246 [MAGIC] (Empty Func) MVW_RegisterXmpDataCallback
    126:   975.135 [CEC]CEC OFF
    127:   977.412 [SEQ] seqEventDispatch (Startup, 5)
    128:   977.437 [STARTUP] startupInitializeComplete
    129:   977.532 [MC] cam event guimode comp. 0
    130:   978.368 [MC] cam event guimode comp. 0
    131:   979.802 [DL] PROP_ACTIVE_SWEEP_STATUS (0)
    132:   979.838 [DL] PROP_DL_ACTION (1)
    133:   986.080 [FA] ChangeCBR(ID=0x8003000a)
    134:   986.767 [FA] RequestFromCheckData
    135:   986.991 [FA] MpuMonSpecificFromPartner : COM_FA_CHECK_FROM 0
    136:   988.072 [DL] PROP_ACTIVE_SWEEP_STATUS (1)
    137:   988.285 [DL] PROP_DL_ACTION (0)
    138:   988.561 [DL] localCreateSerialIOChannelForDLIC
    139:   988.631 [DL] localCreateSerialIOChannelForDLIC
    140:   988.675 [DL] localCreateSerialIOChannelForDLIC
    141:   988.714 [DL] localCreateSerialIOChannelForDLIC
    142:   992.862 [DL] localCreateSerialIOChannelForDLIC
    143:   996.991 [DL]executeDL AD Start 69
    144:   997.103 [DL] localCreateSerialIOChannelForDLIC
    145:  1017.341 [TCH]Active_Mode SetEnd
    146:  1038.165 [TCH] [TCH]Variangle_State = 0
    147:  1043.928 [MCELL][GuiFactoryRegisterEventCommissionProcedure]
    148:  1046.987 [SEQ] seqEventDispatch (Startup) : End
 

35
Camera-specific discussion / Re: Canon 70D (Beta-2b / 26th Nov)
« on: November 30, 2015, 06:38:32 PM »
going to test installing 29nov "A" using a freshly low level formatted card, first from comp then again formatted in camera.  it will take a bit, low level formatting is slow...................................

36
Camera-specific discussion / Re: Canon 70D (Beta-2b / 26th Nov)
« on: November 30, 2015, 05:05:55 PM »
p.s.  i got the nov29 firmware to install by formatting the card on my computer today.  it wouldn't install on a card formatted in the camera yesterday.

37
Camera-specific discussion / Re: Canon 70D (Beta-2b / 26th Nov)
« on: November 30, 2015, 04:59:41 PM »
@nitfreak - ok - cleared all settings.  actually got nov29 to update firmware on a freshly formatted card.  turned on nothing in ml.  no modules.  turn on movie mode to record some video in mov mp4.  overlays were there this time, but camera crashed error 70 in about 10 seconds, before even attempting to record anything.  removed nov29 card, put in nov26 card, turn on camera, turn on movie mode haven't changed anything, it works fine.
Code: [Select]
errlog

Mon Nov 30 11:49:19 2015
      0:    48.277 [STARTUP]
K325 ICU Firmware Version 1.1.1 ( 8.1.3 )
      1:    48.299 [STARTUP]
ICU Release DateTime 2013.09.25 13:56:21
      2:    49.827 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41744000
      3:    50.482 [PROPAD] SerialFlash Packages!! 0x10000
      4:    51.310 [SEQ] seqEventDispatch (Startup, 0)
      5:    51.333 [STARTUP] startupEntry
      6:   105.399 [PROPAD] SerialFlash Packages!! 0x7
      7:   105.586 [STARTUP] startupPropAdminMain : End
      8:   105.704 [SEQ ERROR] NotifyComplete (Cur = 1, 0x2, Flag = 0x20000000)
      9:   146.411 [SEQ] seqEventDispatch (Startup, 1)
     10:   146.448 [STARTUP] startupPrepareProperty
     11:   149.598 [RTC] PROPAD_GetPropertyData : PROP_RTC 0xa0
     12:   151.004 [RTC] ChangePropertyCBR 0x0, 0x4000
     13:   151.258 [RTC] RTC_Permit 0x20
     14:   151.708 [SND] Seq LPC fin
     15:   152.136 [RSC] hMemoryQueue (0x800010) hStorageQueue (0x820012)
     16:   153.104 [RSC] MemoryStatusMasterResultCBR
     17:   169.574 [FM] FM_RegisterSpaceNotifyCallback
     18:   169.614 [MRK] MRK_RegisterSpaceNotifyCallback
     19:   169.661 [AUDIO] [GPS] GPS_RegisterSpaceNotifyCallback
     20:   169.729 [FM] FM_RegisterSpaceNotifyCallback
     21:   170.167 [JOB] InitializeJobClass (ID = 1964, Num = 13)
     22:   187.608 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     23:   190.984 [JOB] InitializeInnerDevelopJobClass (ID = 1964, Num = 16)
     24:   191.020 [JOB] InitializeMultipleExposureShootJobClass ( Num = 27,11 )
     25:   191.044 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 13 )
     26:   191.065 [JOB] InitializeHDRShootJobClass ( Num = 12 )
     27:   191.084 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 34 )
     28:   191.107 [JOB] InitializeGISShootJobClass ( Num = 12 )
     29:   191.131 [JOB] InitializeGISSaveAndEndJobClass ( Num = 25, 31 )
     30:   191.244 [TERMINATE] SHUTDOWN init comp
     31:   191.300 [TERMINATE] Abort init comp
     32:   555.253 [SD] sdSendOCR: CCS=1, S18A=1
     33:   555.366 [SD] Set 1.8V Signaling
     34:   588.712 [SD] sdSendCommand: CMD2 Retry=2(SDSTS_ED)
     35:   591.901 [SD] CARD CAPACITY is 61087Mbyte( 125106176Sec )
     36:   604.359 [SD] SD_GetAccessMode=7
     37:   604.371 [SD] Set Hi-Speed Mode( 96MHz )
     38:   769.885 [FSU] fsuGetPart: Block(32768, 125073408, 125106176)
     39:   856.989 [SEQ] seqEventDispatch (Startup, 2)
     40:   857.385 [SHTRD] [MNAV]Init
     41:   857.606 [SHTRD] [MNAV]SetMMap:1
     42:   860.724 [ENG] [ENGIO](Addr:0x41700000, Data:0x   44000)
     43:   906.038 [SEQ] seqEventDispatch (Startup, 3)
     44:   907.948 [MC] PROP_GUI_STATE 0
     45:   909.068 [MC] PROP_VARIANGLE_GUICTRL : Enable
     46:   909.132 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
     47:   909.284 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 5
     48:   909.436 [MC] PROP_LCD_OFFON_BUTTON : 2
     49:   910.343 [MC] regist master CardCover
     50:   912.753 [PRP] M:B1 F:0 L:0 P:32 T:8
     51:   912.966 [STARTUP] update coded version.
     52:   913.066 [STARTUP] internal version 08:01:03:b1:00:00:32:08:00:00:d0:d0:d0
     53:   914.595 [STARTUP] Set_AVS 60
     54:   917.617 [STARTUP] startupPrepareDevelop
     55:   921.026 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41b2c000
     56:   921.716 [PROPAD] SerialFlash Packages!! 0x490000
     57:   955.842 [PROPAD] SerialFlash Packages!! 0x7
     58:   957.277 [MAC] MAC_Initialize
     59:   957.605 [MAC] K_BOARDID4
     60:   957.644 [MAC] K_BOARDID3
     61:   957.683 [MAC] K_BOARDID2
     62:   957.708 [MAC] K_BOARDID1
     63:   957.882 [MAC] Key=0x0 Board=0x0 Body=0x15453eb7
     64:   967.678 [SHTP] RegRPCHandler Master
     65:   993.627 [MR] TimeCode Mode:1
     66:   993.730 [MR] TimeCode DropFrame Mode:1
     67:   993.765 [MR] PROP_MOVIE_PARAM:0
     68:   999.209 [HPC] ReserveHPCopyChannel (1, 116)
     69:  1011.007 [MR] encdrwrapHPCopyAsyncCBR
     70:  1013.469 [LVDTS] WARN First Get DTS_GetAllRandomData
     71:  1034.889 [STARTUP] startupPrepareRemote
     72:  1035.745 [AUDIO] RegisterCBRSDIOCableConnect
     73:  1037.704 [COM] PackHeap 794838,794838,0
     74:  1038.021 [COM] Local Heap warning hCom[0]size[262144]
     75:  1047.863 [WFT] PROP_ADAPTER_DEVICE_ACTIVE: Can Not Change(0) Connect(0)
     76:  1048.680 [WFT] InitializeAdapterControl END
     77:  1057.361 [RMT] QuickTransmissionEnable (0, 1, 2, 2)
     78:  1057.410 [RMT] PROP_CONNECT_TARGET (0x0 <= 0x0)
     79:  1057.697 [RMT] PROP_CONNECT_TARGET_WFT (0x0 <= 0x0)
     80:  1057.737 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
     81:  1059.522 [PTPCOM] SetPtpTransportResources:0,3253
     82:  1075.893 [WFT] Regist PropCBR PROP_WFT_BLUETOOTH
     83:  1084.010 [FC] _FC_OpenCatalog : wNumOfDir 1
     84:  1092.151 [FM] [GPS] GPS_Initialize (36, 25)
     85:  1092.709 [MRK] MRK_Initialize
     86:  1092.981 [MRK] mrkSetLockSemaphore
     87:  1093.361 [MRK] MRK_PrepareMrkFileObject
     88:  1095.513 [SEQ] seqEventDispatch (Startup, 4)
     89:  1095.697 [DP] DP_Initialize()
     90:  1096.365 [DP] Std T_PrintPage[0] T_PrintNo[0] R_PrintNo[0]
     91:  1096.402 [DP] Std C_PrintNo[0] C_PrintPage[0], C_Copies[0]
     92:  1096.493 [DP] Dp_SetPD_RegistApi Prev:0 New:0
     93:  1096.883 [DP] PROP_CONNECT_TARGET [0x00000000]
     94:  1096.917 [DP] DpConnectionTarget [0x00000000]
     95:  1096.973 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
     96:  1097.003 [DP] DpConnectionTarget [0x00000000]
     97:  1097.078 [DP] LOGICAL_CONNECT [0x00000000]
     98:  1097.116 [DP] DpsTerminate()
     99:  1097.196 [DP] PROP_PHYSICAL_CONNECT [0x00000000]
    100:  1097.224 [DP] RD_Cancel No Issue
    101:  1097.249 [DP] DpPhysicalConnectFlg [0x00000000]
    102:  1097.310 [DP] PROP_INNER_PHYSICAL_CONNECT [0x00000000]
    103:  1097.322 [DP] RD_Cancel No Issue
    104:  1097.343 [DP] DpPhysicalConnectFlg [0x00000000]
    105:  1097.385 [DP] PROP_NETWORK_SYSTEM [0]
    106:  1097.414 [DP] PROP_WIFI_SETTING [0]
    107:  1097.669 [DP] [GYO]DpFunctionList[0x10117fff]
    108:  1097.792 [DP] X FreeMem Address[0x00000000]
    109:  1098.112 [INDEV] INDEV_Initialize
    110:  1102.642 [HDMI] DisconnectHDMI : Not Connected
    111:  1113.470 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
    112:  1113.544 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
    113:  1142.482 [DP] DP_RegisterCBR() Id=1 Count:12
    114:  1142.523 [DP] DP_RegisterCBR() Id=2 Count:12
    115:  1142.544 [DP] DP_RegisterCBR() Id=4 Count:12
    116:  1142.651 [MR] tcmClockEnd
    117:  1143.282 [DISP] SetBacklightBrightness called
    118:  1154.145 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
    119:  1167.183 [MR] PROP_MOVIE_PARAM:0
    120:  1169.269 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
    121:  1171.474 [MR] PROP_MOVIE_PARAM:0
    122:  1174.524 [MAGIC] (Empty Func) MVW_RegisterXmpDataCallback
    123:  1176.446 [CEC]CEC OFF
    124:  1179.004 [SEQ] seqEventDispatch (Startup, 5)
    125:  1179.030 [STARTUP] startupInitializeComplete
    126:  1179.125 [MC] cam event guimode comp. 0
    127:  1179.973 [MC] cam event guimode comp. 0
    128:  1181.399 [DL] PROP_ACTIVE_SWEEP_STATUS (0)
    129:  1181.441 [DL] PROP_DL_ACTION (1)
    130:  1187.889 [FA] ChangeCBR(ID=0x8003000a)
    131:  1188.570 [FA] RequestFromCheckData
    132:  1188.792 [FA] MpuMonSpecificFromPartner : COM_FA_CHECK_FROM 0
    133:  1190.773 [DL] PROP_ACTIVE_SWEEP_STATUS (1)
    134:  1190.994 [DL] PROP_DL_ACTION (0)
    135:  1191.286 [DL] localCreateSerialIOChannelForDLIC
    136:  1191.362 [DL] localCreateSerialIOChannelForDLIC
    137:  1191.404 [DL] localCreateSerialIOChannelForDLIC
    138:  1191.442 [DL] localCreateSerialIOChannelForDLIC
    139:  1195.599 [DL] localCreateSerialIOChannelForDLIC
    140:  1199.729 [DL]executeDL AD Start 69
    141:  1199.825 [DL] localCreateSerialIOChannelForDLIC
    142:  1227.357 [TCH]Active_Mode SetEnd
    143:  1241.030 [TCH] [TCH]Variangle_State = 0
    144:  1245.786 [MCELL][GuiFactoryRegisterEventCommissionProcedure]
    145:  1249.009 [SEQ] seqEventDispatch (Startup) : End
 

38
Camera-specific discussion / Re: Canon 70D (Beta-2b / 26th Nov)
« on: November 30, 2015, 12:56:35 AM »
bombobrundi - the ml build was from today nov 29 that i referred to.  not the nov 26 build, that one works fine here also.  the new one has been withdrawn for now.

39
Camera-specific discussion / Re: Canon 70D (Beta-2b / 26th Nov)
« on: November 29, 2015, 11:50:41 PM »
did anyone else try installing that latest beta from a freshly formatted memory card?

40
Camera-specific discussion / Re: Canon 70D (Beta-2b / 26th Nov)
« on: November 29, 2015, 11:49:12 PM »
there are more but most seem the same except this one.
Code: [Select]
Sun Nov 29 12:21:27 2015
      0:    48.259 [STARTUP]
K325 ICU Firmware Version 1.1.1 ( 8.1.3 )
      1:    48.284 [STARTUP]
ICU Release DateTime 2013.09.25 13:56:21
      2:    49.834 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41744000
      3:    50.492 [PROPAD] SerialFlash Packages!! 0x10000
      4:    51.311 [SEQ] seqEventDispatch (Startup, 0)
      5:    51.339 [STARTUP] startupEntry
      6:   105.300 [PROPAD] SerialFlash Packages!! 0x7
      7:   105.466 [STARTUP] startupPropAdminMain : End
      8:   105.572 [SEQ ERROR] NotifyComplete (Cur = 1, 0x2, Flag = 0x20000000)
      9:   151.367 [SEQ] seqEventDispatch (Startup, 1)
     10:   151.400 [STARTUP] startupPrepareProperty
     11:   153.307 [RTC] PROPAD_GetPropertyData : PROP_RTC 0xa0
     12:   154.819 [RTC] ChangePropertyCBR 0x0, 0x4000
     13:   155.072 [RTC] RTC_Permit 0x20
     14:   155.658 [SND] Seq LPC fin
     15:   156.085 [RSC] hMemoryQueue (0x800010) hStorageQueue (0x820012)
     16:   157.177 [RSC] MemoryStatusMasterResultCBR
     17:   177.064 [FM] FM_RegisterSpaceNotifyCallback
     18:   177.109 [MRK] MRK_RegisterSpaceNotifyCallback
     19:   177.160 [AUDIO] [GPS] GPS_RegisterSpaceNotifyCallback
     20:   177.223 [FM] FM_RegisterSpaceNotifyCallback
     21:   177.482 [JOB] InitializeJobClass (ID = 1754, Num = 13)
     22:   179.605 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     23:   181.981 [JOB] InitializeInnerDevelopJobClass (ID = 1754, Num = 16)
     24:   182.012 [JOB] InitializeMultipleExposureShootJobClass ( Num = 27,11 )
     25:   182.036 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 13 )
     26:   182.059 [JOB] InitializeHDRShootJobClass ( Num = 12 )
     27:   182.078 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 34 )
     28:   182.101 [JOB] InitializeGISShootJobClass ( Num = 12 )
     29:   182.129 [JOB] InitializeGISSaveAndEndJobClass ( Num = 25, 31 )
     30:   182.239 [TERMINATE] SHUTDOWN init comp
     31:   182.289 [TERMINATE] Abort init comp
     32:   373.332 [SD] sdSendOCR: CCS=1, S18A=1
     33:   373.444 [SD] Set 1.8V Signaling
     34:   407.923 [SD] CARD CAPACITY is 61119Mbyte( 125171712Sec )
     35:   420.263 [SD] SD_GetAccessMode=7
     36:   420.280 [SD] Set Hi-Speed Mode( 96MHz )
     37:   421.085 [FSU] fsuGetPart: Block(32768, 125138944, 125171712)
     38:   470.805 [SEQ] seqEventDispatch (Startup, 2)
     39:   471.173 [SHTRD] [MNAV]Init
     40:   471.387 [SHTRD] [MNAV]SetMMap:1
     41:   474.575 [ENG] [ENGIO](Addr:0x41700000, Data:0x   44000)
     42:   520.233 [SEQ] seqEventDispatch (Startup, 3)
     43:   522.185 [MC] PROP_GUI_STATE 0
     44:   523.331 [MC] PROP_VARIANGLE_GUICTRL : Enable
     45:   523.397 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
     46:   523.576 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 5
     47:   523.754 [MC] PROP_LCD_OFFON_BUTTON : 2
     48:   524.697 [MC] regist master CardCover
     49:   527.039 [PRP] M:B1 F:0 L:0 P:32 T:8
     50:   527.263 [STARTUP] update coded version.
     51:   527.343 [STARTUP] internal version 08:01:03:b1:00:00:32:08:00:00:d0:d0:d0
     52:   529.185 [STARTUP] Set_AVS 60
     53:   532.247 [STARTUP] startupPrepareDevelop
     54:   538.587 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41b2c000
     55:   541.642 [PROPAD] SerialFlash Packages!! 0x490000
     56:   575.832 [PROPAD] SerialFlash Packages!! 0x7
     57:   577.285 [MAC] MAC_Initialize
     58:   577.675 [MAC] K_BOARDID4
     59:   577.718 [MAC] K_BOARDID3
     60:   577.753 [MAC] K_BOARDID2
     61:   577.783 [MAC] K_BOARDID1
     62:   577.963 [MAC] Key=0x0 Board=0x0 Body=0x15453eb7
     63:   587.860 [SHTP] RegRPCHandler Master
     64:   614.369 [MR] TimeCode Mode:1
     65:   614.491 [MR] TimeCode DropFrame Mode:1
     66:   614.525 [MR] PROP_MOVIE_PARAM:0
     67:   620.557 [HPC] ReserveHPCopyChannel (1, 116)
     68:   632.328 [MR] encdrwrapHPCopyAsyncCBR
     69:   635.323 [LVDTS] WARN First Get DTS_GetAllRandomData
     70:   657.297 [STARTUP] startupPrepareRemote
     71:   658.148 [AUDIO] RegisterCBRSDIOCableConnect
     72:   660.290 [COM] PackHeap 794564,794564,0
     73:   660.613 [COM] Local Heap warning hCom[0]size[262144]
     74:   670.686 [WFT] PROP_ADAPTER_DEVICE_ACTIVE: Can Not Change(0) Connect(0)
     75:   671.505 [WFT] InitializeAdapterControl END
     76:   680.650 [RMT] QuickTransmissionEnable (0, 1, 2, 2)
     77:   680.697 [RMT] PROP_CONNECT_TARGET (0x0 <= 0x0)
     78:   680.979 [RMT] PROP_CONNECT_TARGET_WFT (0x0 <= 0x0)
     79:   681.016 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
     80:   682.739 [PTPCOM] SetPtpTransportResources:0,3253
     81:   698.549 [WFT] Regist PropCBR PROP_WFT_BLUETOOTH
     82:   706.742 [FC] _FC_OpenCatalog : wNumOfDir 1
     83:   715.050 [FM] [GPS] GPS_Initialize (36, 25)
     84:   715.676 [MRK] MRK_Initialize
     85:   715.945 [MRK] mrkSetLockSemaphore
     86:   716.374 [MRK] MRK_PrepareMrkFileObject
     87:   718.680 [SEQ] seqEventDispatch (Startup, 4)
     88:   718.864 [DP] DP_Initialize()
     89:   719.543 [DP] Std T_PrintPage[0] T_PrintNo[0] R_PrintNo[0]
     90:   719.579 [DP] Std C_PrintNo[0] C_PrintPage[0], C_Copies[0]
     91:   719.670 [DP] Dp_SetPD_RegistApi Prev:0 New:0
     92:   720.078 [DP] PROP_CONNECT_TARGET [0x00000000]
     93:   720.112 [DP] DpConnectionTarget [0x00000000]
     94:   720.164 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
     95:   720.190 [DP] DpConnectionTarget [0x00000000]
     96:   720.241 [DP] LOGICAL_CONNECT [0x00000000]
     97:   720.273 [DP] DpsTerminate()
     98:   720.366 [DP] PROP_PHYSICAL_CONNECT [0x00000000]
     99:   720.391 [DP] RD_Cancel No Issue
    100:   720.415 [DP] DpPhysicalConnectFlg [0x00000000]
    101:   720.465 [DP] PROP_INNER_PHYSICAL_CONNECT [0x00000000]
    102:   720.479 [DP] RD_Cancel No Issue
    103:   720.502 [DP] DpPhysicalConnectFlg [0x00000000]
    104:   720.540 [DP] PROP_NETWORK_SYSTEM [0]
    105:   720.564 [DP] PROP_WIFI_SETTING [0]
    106:   720.850 [DP] [GYO]DpFunctionList[0x10117fff]
    107:   720.972 [DP] X FreeMem Address[0x00000000]
    108:   721.287 [INDEV] INDEV_Initialize
    109:   725.987 [HDMI] DisconnectHDMI : Not Connected
    110:   736.715 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
    111:   736.785 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
    112:   766.869 [DP] DP_RegisterCBR() Id=1 Count:12
    113:   766.902 [DP] DP_RegisterCBR() Id=2 Count:12
    114:   766.920 [DP] DP_RegisterCBR() Id=4 Count:12
    115:   767.053 [MR] tcmClockEnd
    116:   767.764 [DISP] SetBacklightBrightness called
    117:   778.633 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
    118:   791.533 [MR] PROP_MOVIE_PARAM:0
    119:   793.661 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
    120:   795.893 [MR] PROP_MOVIE_PARAM:0
    121:   799.308 [MAGIC] (Empty Func) MVW_RegisterXmpDataCallback
    122:   801.421 [CEC]CEC OFF
    123:   803.710 [SEQ] seqEventDispatch (Startup, 5)
    124:   803.734 [STARTUP] startupInitializeComplete
    125:   803.830 [MC] cam event guimode comp. 0
    126:   804.636 [MC] cam event guimode comp. 0
    127:   806.041 [DL] PROP_ACTIVE_SWEEP_STATUS (0)
    128:   806.077 [DL] PROP_DL_ACTION (1)
    129:   821.860 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(1)
    130:   822.125 [FA] ChangeCBR(ID=0x8003000a)
    131:   822.877 [FA] RequestFromCheckData
    132:   827.660 [MCELL][GuiFactoryRegisterEventCommissionProcedure]
    133:   838.375 [FA] MpuMonSpecificFromPartner : COM_FA_CHECK_FROM 0
    134:   843.631 [DP] PROP_WIFI_SETTING [0]
    135:   843.988 [DP] PROP_NETWORK_SYSTEM [0]
    136:   845.468 [MR] PROP_MOVIE_PARAM:0
    137:   851.072 [DP] PROP_WIFI_SETTING [0]
    138:   851.654 [DP] PROP_NETWORK_SYSTEM [0]
    139:   852.794 [MR] PROP_MOVIE_PARAM:0
    140:   855.707 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
    141:   855.791 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
    142:   855.823 [DP] DpConnectionTarget [0x00000000]
    143:   856.499 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
    144:   856.585 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
    145:   856.616 [DP] DpConnectionTarget [0x00000000]
    146:   861.979 [SHTRD] [MNAV]SetMMap:2
    147:   863.216 [SHTRD] [MNAV]SetMMap:2
    148:   863.275 [SHTRD] [MNAV]SetTopAddr[2] (4b000000 50000000)(4b000000 50000000)
    149:   890.788 [ATKCOM] Send Bv(NG):61 Tv:65 Av:29 Iso:65 0 0 1 0 ST:0
    150:   892.139 [TCH]Active_Mode SetEnd
    151:   899.108 [CAPD] LvdsCalclkCtrlMaster
    152:   899.118 [CAPD] ImagePowerOn
    153:   908.983 [LVEVF] ShootingMode(2), FrameRate(5)
    154:  1022.292 [WINSYS] Zlib maxsize update 884
    155:  1022.345 [WINSYS] Zlib maxsize update 1396
    156:  1066.855 [TCH] [TCH]Variangle_State = 0
    157:  1067.555 [SEQ] seqEventDispatch (Startup) : End
    158:  1229.107 [ATKAEC] *** ValidResult (Bv:62,0,8)==TRUE ***
    159:  1229.683 [ATKAE] WARN AE_CALC_AEControl : Before 1st AE Metering
    160:  1319.079 [ATKCOM] Send Bv(OK):61 Tv:65 Av:29 Iso:65 0 0 1 0 ST:0
 

41
Camera-specific discussion / Re: Canon 70D (Beta-2b / 26th Nov)
« on: November 29, 2015, 11:34:22 PM »
a pair of logs -
Code: [Select]
crash00.log
ASSERT: 0
at ./Memory/Memory.c:575, AeWb:3db28
lv:1 mode:22


Magic Lantern version : Nightly.2015Nov29.70D111A
Mercurial changeset   : 0a981f3d2abf+ (70D-merge-dryos-hooks) tip
Built on 2015-11-29 11:22:59 UTC by ml@ml-pc.
Free Memory  : 238K + 2393K

log000.log
Sun Nov 29 12:17:59 2015
      0:    48.269 [STARTUP]
K325 ICU Firmware Version 1.1.1 ( 8.1.3 )
      1:    48.293 [STARTUP]
ICU Release DateTime 2013.09.25 13:56:21
      2:    49.814 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41744000
      3:    50.470 [PROPAD] SerialFlash Packages!! 0x10000
      4:    51.290 [SEQ] seqEventDispatch (Startup, 0)
      5:    51.313 [STARTUP] startupEntry
      6:   105.384 [PROPAD] SerialFlash Packages!! 0x7
      7:   105.564 [STARTUP] startupPropAdminMain : End
      8:   105.668 [SEQ ERROR] NotifyComplete (Cur = 1, 0x2, Flag = 0x20000000)
      9:   147.340 [SEQ] seqEventDispatch (Startup, 1)
     10:   147.383 [STARTUP] startupPrepareProperty
     11:   149.439 [PROPST] CLR Adjective & Situation : AEMode -> StartupCondition
     12:   150.099 [RTC] PROPAD_GetPropertyData : PROP_RTC 0xa0
     13:   151.726 [RTC] ChangePropertyCBR 0x0, 0x4000
     14:   151.973 [RTC] RTC_Permit 0x20
     15:   152.421 [SND] Seq LPC fin
     16:   152.845 [RSC] hMemoryQueue (0x800010) hStorageQueue (0x820012)
     17:   154.065 [RSC] MemoryStatusMasterResultCBR
     18:   183.486 [FM] FM_RegisterSpaceNotifyCallback
     19:   183.527 [MRK] MRK_RegisterSpaceNotifyCallback
     20:   183.576 [AUDIO] [GPS] GPS_RegisterSpaceNotifyCallback
     21:   183.660 [FM] FM_RegisterSpaceNotifyCallback
     22:   183.954 [JOB] InitializeJobClass (ID = 1754, Num = 13)
     23:   193.327 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     24:   195.479 [JOB] InitializeInnerDevelopJobClass (ID = 1754, Num = 16)
     25:   195.510 [JOB] InitializeMultipleExposureShootJobClass ( Num = 27,11 )
     26:   195.531 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 13 )
     27:   195.554 [JOB] InitializeHDRShootJobClass ( Num = 12 )
     28:   195.573 [JOB] InitializeHDRSaveAndEndJobClass ( Num = 34 )
     29:   195.596 [JOB] InitializeGISShootJobClass ( Num = 12 )
     30:   195.619 [JOB] InitializeGISSaveAndEndJobClass ( Num = 25, 31 )
     31:   195.723 [TERMINATE] SHUTDOWN init comp
     32:   195.773 [TERMINATE] Abort init comp
     33:   204.207 [FM] fmPrepare : Completed
     34:   204.344 [SEQ] seqEventDispatch (Startup, 2)
     35:   204.715 [SHTRD] [MNAV]Init
     36:   204.926 [SHTRD] [MNAV]SetMMap:1
     37:   208.119 [ENG] [ENGIO](Addr:0x41700000, Data:0x   44000)
     38:   253.492 [SEQ] seqEventDispatch (Startup, 3)
     39:   255.387 [MC] PROP_GUI_STATE 0
     40:   256.453 [MC] PROP_VARIANGLE_GUICTRL : Enable
     41:   256.520 [MC] [MC] PROP_HEADPHONE_VOLUME_VALUE : 0
     42:   256.668 [MC] [MC] PROP_MOVIE_PLAY_VOLUME : 5
     43:   256.829 [MC] PROP_LCD_OFFON_BUTTON : 2
     44:   257.805 [MC] regist master CardCover
     45:   260.260 [PRP] M:B1 F:0 L:0 P:32 T:8
     46:   260.412 [STARTUP] update coded version.
     47:   260.486 [STARTUP] internal version 08:01:03:b1:00:00:32:08:00:00:d0:d0:d0
     48:   261.234 [STARTUP] Set_AVS 60
     49:   264.333 [STARTUP] startupPrepareDevelop
     50:   267.831 [PROPAD] PROPAD_CreateFROMPropertyHandle DRAMAddr 0x41b2c000
     51:   268.521 [PROPAD] SerialFlash Packages!! 0x490000
     52:   302.704 [PROPAD] SerialFlash Packages!! 0x7
     53:   304.123 [MAC] MAC_Initialize
     54:   304.489 [MAC] K_BOARDID4
     55:   304.532 [MAC] K_BOARDID3
     56:   304.566 [MAC] K_BOARDID2
     57:   304.596 [MAC] K_BOARDID1
     58:   304.783 [MAC] Key=0x0 Board=0x0 Body=0x15453eb7
     59:   314.596 [SHTP] RegRPCHandler Master
     60:   340.793 [MR] TimeCode Mode:1
     61:   340.908 [MR] TimeCode DropFrame Mode:1
     62:   340.943 [MR] PROP_MOVIE_PARAM:0
     63:   346.424 [HPC] ReserveHPCopyChannel (1, 116)
     64:   358.180 [MR] encdrwrapHPCopyAsyncCBR
     65:   360.959 [LVDTS] WARN First Get DTS_GetAllRandomData
     66:   382.508 [STARTUP] startupPrepareRemote
     67:   383.355 [AUDIO] RegisterCBRSDIOCableConnect
     68:   385.515 [COM] PackHeap 794420,794420,0
     69:   385.833 [COM] Local Heap warning hCom[0]size[262144]
     70:   395.475 [WFT] PROP_ADAPTER_DEVICE_ACTIVE: Can Not Change(0) Connect(0)
     71:   396.257 [WFT] InitializeAdapterControl END
     72:   405.320 [RMT] QuickTransmissionEnable (0, 1, 2, 2)
     73:   405.366 [RMT] PROP_CONNECT_TARGET (0x0 <= 0x0)
     74:   405.645 [RMT] PROP_CONNECT_TARGET_WFT (0x0 <= 0x0)
     75:   405.683 [RMT] PROP_CONNECT_TARGET_INNER (0x0 <= 0x0)
     76:   407.450 [PTPCOM] SetPtpTransportResources:0,3253
     77:   423.358 [WFT] Regist PropCBR PROP_WFT_BLUETOOTH
     78:   597.572 [SD] sdSendOCR: CCS=1, S18A=1
     79:   597.680 [SD] Set 1.8V Signaling
     80:   632.222 [SD] CARD CAPACITY is 61119Mbyte( 125171712Sec )
     81:   645.078 [SD] SD_GetAccessMode=7
     82:   645.090 [SD] Set Hi-Speed Mode( 96MHz )
     83:   645.909 [FSU] fsuGetPart: Block(32768, 125138944, 125171712)
     84:   690.476 [FM] FileNo (DriveNo = 2, 0 <-> 1764)
     85:   690.604 [FC] _FC_OpenCatalog : wNumOfDir 1
     86:   697.992 [FM] [GPS] GPS_Initialize (36, 25)
     87:   698.574 [MRK] MRK_Initialize
     88:   698.841 [MRK] mrkSetLockSemaphore
     89:   699.219 [MRK] MRK_PrepareMrkFileObject
     90:   702.314 [SEQ] seqEventDispatch (Startup, 4)
     91:   702.490 [DP] DP_Initialize()
     92:   703.171 [DP] Std T_PrintPage[0] T_PrintNo[0] R_PrintNo[0]
     93:   703.206 [DP] Std C_PrintNo[0] C_PrintPage[0], C_Copies[0]
     94:   703.298 [DP] Dp_SetPD_RegistApi Prev:0 New:0
     95:   703.708 [DP] PROP_CONNECT_TARGET [0x00000000]
     96:   703.743 [DP] DpConnectionTarget [0x00000000]
     97:   703.796 [DP] PROP_CONNECT_TARGET_INNER [0x00000000]
     98:   703.823 [DP] DpConnectionTarget [0x00000000]
     99:   703.879 [DP] LOGICAL_CONNECT [0x00000000]
    100:   703.909 [DP] DpsTerminate()
    101:   703.997 [DP] PROP_PHYSICAL_CONNECT [0x00000000]
    102:   704.023 [DP] RD_Cancel No Issue
    103:   704.049 [DP] DpPhysicalConnectFlg [0x00000000]
    104:   704.098 [DP] PROP_INNER_PHYSICAL_CONNECT [0x00000000]
    105:   704.109 [DP] RD_Cancel No Issue
    106:   704.132 [DP] DpPhysicalConnectFlg [0x00000000]
    107:   704.170 [DP] PROP_NETWORK_SYSTEM [0]
    108:   704.197 [DP] PROP_WIFI_SETTING [0]
    109:   704.461 [DP] [GYO]DpFunctionList[0x10117fff]
    110:   704.583 [DP] X FreeMem Address[0x00000000]
    111:   704.918 [INDEV] INDEV_Initialize
    112:   709.546 [HDMI] DisconnectHDMI : Not Connected
    113:   720.333 [IMPP] H264E InitializeH264EncodeFor1080pDZoom
    114:   720.410 [IMPP] H264E InitializeH264EncodeFor1080p25fpsDZoom
    115:   749.985 [DP] DP_RegisterCBR() Id=1 Count:12
    116:   750.032 [DP] DP_RegisterCBR() Id=2 Count:12
    117:   750.055 [DP] DP_RegisterCBR() Id=4 Count:12
    118:   750.167 [MR] tcmClockEnd
    119:   750.832 [DISP] SetBacklightBrightness called
    120:   761.724 [GUI] MainEventHandler PROP_ERROR_FOR_DISPLAY(0)
    121:   774.731 [MR] PROP_MOVIE_PARAM:0
    122:   776.813 [GUI] MainEventHandler PROP_LV_OUTPUT_DEVICE(0)
    123:   779.440 [MR] PROP_MOVIE_PARAM:0
    124:   782.546 [MAGIC] (Empty Func) MVW_RegisterXmpDataCallback
    125:   784.611 [CEC]CEC OFF
    126:   786.870 [SEQ] seqEventDispatch (Startup, 5)
    127:   786.896 [STARTUP] startupInitializeComplete
    128:   786.994 [MC] cam event guimode comp. 0
    129:   787.835 [MC] cam event guimode comp. 0
    130:   789.246 [DL] PROP_ACTIVE_SWEEP_STATUS (0)
    131:   789.282 [DL] PROP_DL_ACTION (1)
    132:   795.829 [FA] ChangeCBR(ID=0x8003000a)
    133:   796.554 [FA] RequestFromCheckData
    134:   796.985 [FA] MpuMonSpecificFromPartner : COM_FA_CHECK_FROM 0
    135:   797.860 [DL] PROP_ACTIVE_SWEEP_STATUS (1)
    136:   798.068 [DL] PROP_DL_ACTION (0)
    137:   798.350 [DL] localCreateSerialIOChannelForDLIC
    138:   798.421 [DL] localCreateSerialIOChannelForDLIC
    139:   798.461 [DL] localCreateSerialIOChannelForDLIC
    140:   798.494 [DL] localCreateSerialIOChannelForDLIC
    141:   802.653 [DL] localCreateSerialIOChannelForDLIC
    142:   806.787 [DL]executeDL AD Start 69
    143:   806.879 [DL] localCreateSerialIOChannelForDLIC
    144:   827.349 [TCH]Active_Mode SetEnd
    145:   848.046 [TCH] [TCH]Variangle_State = 0
    146:   853.918 [MCELL][GuiFactoryRegisterEventCommissionProcedure]
    147:   857.046 [SEQ] seqEventDispatch (Startup) : End
 


42
Camera-specific discussion / Re: Canon 70D (Beta-2b / 26th Nov)
« on: November 29, 2015, 06:07:42 PM »
am i the only one having nothing but problems with the new beta?  i installed todays on a used card.  boots fine but crashes all over the place.  somehow all the overlays are gone.  just turning movie mode on with dual iso on locks up the camera.  err 70  err 80.  i have some logs if you want them.

so i started over and re-formatted the card.  copied over the new beta.  did the update firmware.  it gets to the reboot camera ok, but when rebooted the red light comes on and the camera is hard locked.  did it over again to verify.  it won't boot using the new beta.

reformatted card installed the 11-26 firmware and everything is back to working.

43
Camera-specific discussion / Re: Canon 70D (Beta-2b / 26th Nov)
« on: November 28, 2015, 05:10:03 PM »
the test build hard crashed my 70d.  i was in movie mode, brought up magic lantern menu, menu closes cam starts recording and won't respond to any buttons including the off switch.  removed battery to stop it.  repeated a second time to verify.   now removing test build.

here's the crash.log - ASSERT: 0
at ./Memory/Memory.c:575, task AeWb
lv:1 mode:3


Magic Lantern version : Nightly.2015Nov28.70D111A
Mercurial changeset   : 15be51f3ac34+ (70D-merge-dryos-hooks) tip
Built on 2015-11-28 12:52:56 UTC by ml@ml-pc.
Free Memory  : 238K + 2992K

44
Camera-specific discussion / Re: Canon 70D (Beta-2 / 15th Nov)
« on: November 26, 2015, 09:42:38 PM »
Quote
So how does 1 add an image/attach'?

OlRivrRat this appears to be one of those forums that doesn't allow direct uploads of pictures.  you have to insert the url of the image from somewhere on the web between the img and /img tags.  i use a temp folder in one of my website. 


45
Camera-specific discussion / Re: Canon 70D (Beta-2 / 15th Nov)
« on: November 20, 2015, 05:02:13 PM »
i'd start over. low level format the sd card in the camera(erase ml).  extract the ml zip onto it. use the update firmware steps.

46
Camera-specific discussion / Re: Canon 70D (Beta-2 / 15th Nov)
« on: November 19, 2015, 08:16:00 PM »
bombobrudi - did you go into the canon settings and "update firmware" ?  sounds like you used a new card and it's not bootable yet.

47
Camera-specific discussion / Re: Canon 70D (Beta-1 / 22th Aug)
« on: November 08, 2015, 04:55:29 AM »
sorry if you were actually asking for an answer then buy photoshop.

48
Camera-specific discussion / Re: Canon 70D (Beta-1 / 22th Aug)
« on: November 08, 2015, 04:41:31 AM »
Andori0803 - what the heck does not being able to open .cr2 files have to do with magic lantern firmware???  .cr2 are not affected by magic lantern at all.

49
Camera-specific discussion / Re: Canon 600D / T3i
« on: October 28, 2015, 03:24:36 PM »
personally i think part of the problem is that the download page says "nightly" builds.  some might take that literally.

50
Camera-specific discussion / Re: Canon 70D (Beta-1 / 22th Aug)
« on: October 18, 2015, 12:55:32 AM »
hi nikfreak!  hadn't heard from you in a while.  any new toys coming for us to play with? :-)

Pages: 1 [2] 3 4