Messages

can anyone give me the Drop box link of daily compile downloads

See first page?

http://www.magiclantern.fm/forum/index.php?topic=6320.0

Hey guys, I'm quite new to ML. I had it working on my t4i with firmware 1.0.1 but when I updated to 1.0.4 it stopped working. Can anyoe tell me how to make it work with the new firmware if possible...Thanks so much

The current version is NOT compatible with firmware 1.0.4. I expect that it will work in the future. For now, if you want ML, do not upgrade. ML will check what FW you are running and will therefor not start if the wrong FW is found. The developers just do not know what canon changed and will have to spend time on it.

I have moved this topic out of the 650D alpha topic.  http://www.magiclantern.fm/forum/index.php?topic=6320.250

This should provide a better overview for this nice tool.

Kind regards
Blade

I have moved the pink dot removal tool of Foorgol to a new topic ( I hope I got all the posts).

http://www.magiclantern.fm/forum/index.php?topic=6658.0

It is a very nice tool and I believe it deserves its own tread. Additional it does not directly relates to this alpha release.

Kind regards
Blade

Using a non-ML card, ML still loads because I
updated the firmware with ML. Just not the latest Satriani build, I need a card with the latest
autoexec.bin and ML folder for that.

Do you mean that if you insert an sd without ml, you still booth ml?

I assume ML silent pic Raw and Video raw is the same thing, right? just streamable. Any of those ML raw DNG either silent pic or extracted from Video. Compared to Original Canon Photo Raw has much more noise overall. Other than the known bug of pink dots.

Lets just say for the sake of the arguement I took a photo on iso 800 with silent pic RAW and the same photo with Canon RAW. When I put them on photoshop I match the pixel size for a more fair comparison. And the ML raw has so much more noise then the canon.

The canon raw is the full sensor, silent pic is just the live view . If you read the documentation about sp. you would know that the resolution is only 1720x974.

You mean canon raw film? Or raw pic vs silent pic

A raw picture will also have more noise as its jpg counter part. Jounfux noise in post, and you and up with a better end result.

It may not be the correct forum, but I surly enjoyed the short film. Can you explain what features you used in ml to make this?

please tell me when about release dates ML Keep up to firmware version 104? even approximately.

Ml is developed in spare time of the developers, there is no timeline. Its done when its done.  The developers are aware of the 1.04 version, however i has no fixes that can not be overcome by a work around, so it may not have a high priority.

New question I just cant solve, nomatter how hard I look an asnwer on the internet and forums.

Why would anyone use Silent Pic 14bit instead of Canon Raw CR2 other than it is silent?

As far as i know, that is the only reason. Most dominant use would be e.g timelaps. It will save a lot of shutter action, save a lot of space, and the quality is perfect for this purpose.

[but who knows what canon did]

  but who knows what canon did

[Wish mode on]
-Fixed SD controller now writes at 110 MB/SEC
-Increased system memory, so we can have more fun
-Added a PRISM file so the NSA can view all your photo's
-USB host will allow you to attach a external HDD to your camera and record directly to that volume (at USB 3 speeds btw...)
-Inserting coffee beans into the housing will make the camera grind them, and make a nice espresso...
[/Wish mode off]

I use the build from 10-jun-13,

If i set advanced bracketing to 9 exposures, and and 2 ev Mode is M. The camera starts taking 1-2 pictures and then i get a timer in the richt bottum of the screen ( as in recording video), and the camera stalls.

If i turn it on and off, every thing seems ok, however if i try to continue with taking pictures I press the shutter and get a beep ( as in 2 sec delay) it keeps peeping until i release the shutter, and no pictures are taken.

It seems to be stuck in bulp. 

Tested it 5 times, and 2 times it did recover from bulp and take the rest, 3 times it got stuck.

New topic! Nice clean start. I will switch to a Satraini build ASAP.. Aldo my wife is away with the car, and my camera is in the trunk ..doh...

For the FPS testing is there anything I can do to help?

It loos like a cool divice, aldo the reviews say it works mostly Ok, it does seem to have its limitations. I wonder if you could control ML via this setup.

But I mean, we are supposed to report the bugs, how big is the chance of my camera just stop working? If something goes wrong can i reset it or something?

"if it breaks you get to keep both parts" This al (pre)alpha, so it has the potential to permanently brick you camera. If you can't take that risk, do not use it. However, this also applies to the stable version. Overall the software is very stable. If you get a freeze, pull the battery.... as you may be overheating your CPU, if you format the SD, ML will no longer boot, and you are back to stock firmware.

if i understand correct, you can only turn it on and off, nothing else....

Pick one:
- Tearing MagicZoom
- In sync MZ but all camera buttons unusable when enabled except for the MZ trigger key.

I really like having MZ, and it is not really optimal to use as is was now....  If i am using it, i would at least have to be able to use shutter right? So i will still go for the tearing MZ....   

Or... Id you happen to use final cut like me, get the plugin and it will do it all for you.

Also, as the newly appointed moderator for this 'New ports' section, along with blade,
Hello!

Also from me, Hello...

Thanks, Will do my best to keep it nice and clean.

I would like to help, GMT +1. I can spend some time daily to moderate a tread. I follow the 650D tread, however i would not mind tending to something else.

I i woud like to reproduce your not working fps. What setting should I put my camera in , what exact setting should I use in fps ?  Please give as much information as possible.

As fps is working for me in some settings, and some not, I wonder why it is not working at all for you.

Please let me know so we can fix this

No that is the current version, please test and report any bug found

I am not a developer, so i may be wrong.

The developers post an alpha, on order to get feedback on this particular build.

You and anybody is free to compile what they want, however, if people start reporting bugs, from your build its may be difficult to track whats going on.

Additional if you make a mistake and brick your own camera, thats your own problem, if you brick someone else its camera they will turn to the developers to fix it.  And that may be very hard for them.

Therefor i would advise if you have the skills to compile it yourself, please do so, otherwise be patient....