Messages

Got it. Can you chek in Debug menu how much memory you have?

Before Raw Video enabled:
Free memory  162k+3868K
Image Buffers 720x480,720x480

After Raw Video enabled and after raw video recording in full screen (1920x1080):
Free memory  162k+3720K
Image Buffers 720x480,1904x1274

After raw video attempt to record in 5x zoom following "Memory error MB"(1920x1080):
Free memory  162k+3720K
Image Buffers 720x480,1152x762

Ok, 10 hours later.

"Memory error MB" for very short time. Very difficult to read. In normal mode I can record raw 1920x1080 with small number drop frames. I have 2 samples of CF Transend 600 32GB. The same result.

Is there somebody who can record raw 5x zoom on CF Transend 600 32GB? I have memory error

When I press 5x zoom and then LV button there is "Memory error MB" for very short time. It is the same for all builds (May 17,18,19,20). CF Transend 600. For enabled Hack3D too. For 1920x1080 and smaller size (1600x720) too.

I will try.  Thank you. I have no problem with raw video, but only with crop.
I have some questions about your first thread for this topic:
What is the reason to do item No3 if you do item No22?
Why the succession is not correct:1-14,17-20,24-27,22,23,28. Is it simply error?
Item No23: after pressing the zoom button 5X and pressing the LV button (item No28)
should i see recording process on the screen (as normally i see during raw recording?)

ML v.2013May19.503113
Build on 2013-05-19 23:12:36
I have tried May15, May17 also
CF - Transend 600 32Gb

Please help!
There is no crop video on my 5D3. I have used RenatoPhoto's instruction from the first post. When i press 5x zoom first and then LV button - nothing happens, but zero size raw file. If i press LV button first- recording starts, but when I press 5x zoom - recording stops. Raw settings 1920x1080. I have tried several later builds.

Alex, thank you very much for research! But how to stop the test and how to send a  Bench.log to you?
MarkIII
[spoiler]Buffer size experiment
ML v2.3.NEXT.2013May17.5D3113, 3046238719b2+ (unified) tip
Mode: movie 1920x1080 24p, Global Draw: OFF
CF TRANSCEND        TS32GCF600                             
10312704 570
15885312 620
80896 227
8949760 631
28661760 652
16264192 915
24521728 885
16424960 891
13148160 910
15619072 898
1658880 779
21001216 896
8548352 892
19760128 897
5965824 869
24906752 900
13968384 888
16770048 912
4542464 860
13063168 889
33263616 929
30312448 905
16713728 912
3887104 860
21841920 896
12846080 911
16192512 899
3333120 844
6719488 873
17313792 913
23374848 897
2865152 832
32488448 922
18588672 898
4186112 853
821248 712
3661824 846
18359296 911
19875840 895
22754304 916
13665280 893
24957952 903
28555264 911
33442816 908
10708992 899
20242432 907
8774656 877
11216896 904
23156736 902
12750848 888
12369920 904
2157568 814
15279104 895
29943808 921
30321664 908
19004416 900
268288 477
23778304 907
467968 598
1905664 816
32368640 930
19829760 895
26281984 909
24153088 923
11364352 883
32160768 928
5944320 878
24118272 900
28511232 923
31526912 907
15956992 910
1732608 790
13881344 891
6106112 874
17367040 913
21693440 902
30835712 925
1139712 738
13698048 907
19388416 860
1532928 774
16333824 898
15963136 915
23540736 944
23770112 937
7317504 897
6019072 872
13303808 903
32039936 922
13137920 909
24311808 920
25442304 928
8986624 285
25421824 307
2720768 823
18526208 880
12448768 1093
[/spoiler]

[spoiler]Buffer size experiment
ML v2.3.NEXT.2013May17.5D3113, 3046238719b2+ (unified) tip
Mode: playback, Global Draw: OFF
CF TRANSCEND        TS32GCF600                             
10312704 682
15885312 715
80896 354
8949760 711
28661760 723
16264192 1057
24521728 1138
16424960 1125
13148160 1135
15619072 1138
1658880 1012
21001216 1134
8548352 1125
19760128 1139
5965824 1106
24906752 1140
13968384 1137
16770048 1142
4542464 1103
13063168 1137
33263616 1147
30312448 1143
16713728 1137
3887104 1080
21841920 1141
12846080 1103
16192512 1137
3333120 1094
6719488 1122
17313792 1136
23374848 1136
2865152 1063
32488448 1139
18588672 1142
4186112 1107
821248 954
3661824 1068
18359296 1130
19875840 1136
22754304 1132
13665280 1136
24957952 1142
28555264 1144
33442816 1143
10708992 1131
20242432 1143
8774656 1116
11216896 1127
23156736 1136
12750848 1132
12369920 1135
2157568 1045
15279104 1136
29943808 1135
30321664 1140
19004416 1117
268288 697
23778304 1143
467968 832
1905664 1053
32368640 1139
19829760 1141
26281984 1143
24153088 1059
11364352 1128
32160768 1146
5944320 1119
24118272 1136
28511232 1146
31526912 1144
15956992 1138
1732608 1046
13881344 1134
6106112 1119
17367040 1137
21693440 1119
30835712 1173
1139712 981
13698048 1138
19388416 1142
1532928 1030
16333824 1136
15963136 1141
23540736 1149
23770112 1123
7317504 1103
6019072 1121
13303808 1142
32039936 1140
13137920 1143
24311808 1147
25442304 1152
8986624 1137
25421824 1150
2720768 1088
18526208 1143
12448768 1138
6514688 971
6632448 1127
17897472 1146
26569728 1151
22568960 1148
11912192 1142
22007808 1152
30651392 1105
29615104 724
18367488 725
21049344 734
15778816 735
24951808 822
5359616 1114
23476224 1140
17125376 1128
3318784 1095
12782592 1137
30965760 1135
1974272 1029
32021504 1136
24463360 1139
28246016 1132
23352320 1075
27161600 1131
25191424 1120
10841088 1120
22846464 1131
19111936 984
26234880 1065
32610304 1137
14385152 1098
18029568 1041
11080704 1114
3933184 1103
22414336 1133
8314880 1126
27988992 1124
20073472 1061
23487488 1131
30233600 1130
25299968 1129
2406400 1016
28059648 1128
2145280 1008
27503616 1095
20705280 1114
28731392 1134
2458624 1034
19662848 1127
[/spoiler]

But I found that after installing ML on EOS M the 18-55mm couldn't release the shutter, I have to dismount and put it back in order to shoot.

Same for me for autoexec.bin compiled on 20.04.2013, but there is no problem for autoexec.bin on 10.12.2012
I have tried compile autoexec.bin today but got an error:

[spoiler][ CC       ]   picoc.o
[ CC       ]   chdk-gui_script.o
[ AR       ]   lib_a-memcpy.o
[ AR       ]   newlib-libc.a
[ LD       ]   magiclantern
exmem.o: In function `exmem_save_buffer':
exmem.c:(.text+0x1fc): undefined reference to `GetNextMemoryChunk'
exmem.o: In function `exmem_clear':
exmem.c:(.text+0x268): undefined reference to `GetNextMemoryChunk'
exmem.o: In function `shoot_malloc_suite_contig':
exmem.c:(.text+0x504): undefined reference to `GetNextMemoryChunk'
debug.o: In function `guess_free_mem_task':
debug.c:(.text+0x9c8): undefined reference to `GetNextMemoryChunk'
debug.o: In function `stub_test_task':
debug.c:(.text+0x6970): undefined reference to `GetNextMemoryChunk'
debug.o:debug.c:(.text+0x70c4): more undefined references to `GetNextMemoryChunk                                                                   ' follow
collect2.exe: error: ld returned 1 exit status
../../Makefile.inc:441: recipe for target `magiclantern' failed
make: *** [magiclantern] Error 1
make: Leaving directory `/home/vstrglv/magic-lantern/platform/EOSM.106'[/spoiler]
No problem for compiling autoexec.bin for5d3 today (but dated  5th of May)

Is the MAX frames only 29 for 1920p MKIII? Too small.

and the picture size set to "sRAW" inside the ML menu.

I can not find this in ML menu. MKIII

I have compiled autoexec.bin for 5Dmark3 many times. Last time on 3/11/2013.
I used commands:
cd magic-lantern
hg pull
hg update
make -C /home/vXXXX/magic-lantern/platform/5D3.113
But I have got an error today:

$ make -C /home/vXXXX/magic-lantern/platform/5D3.113
make: Entering directory `/home/vXXXX/magic-lantern/platform/5D3.113'
[ CC       ]   boot-hack.o
/bin/sh: /home/vXXXX/gcc-arm-none-eabi-4_7-2012q4/bin/arm-none-eabi-gcc-4.7.3.exe: No such file or directory
../../Makefile.inc:672: recipe for target `boot-hack.o' failed
make: *** [boot-hack.o] Error 127
make: Leaving directory `/home/vXXXX/magic-lantern/platform/5D3.113'

There are only two dir in vXXXX :magic-lantern and arm-toolchain462
What is a problem?
Then... :
installed gcc-4.7.3,
made dir gcc-arm-none-eabi-4_7-2012q4 in vXXXX
copied all from installed gcc-4.7.3 dir to dir gcc-arm-none-eabi-4_7-2012q4

O.K.now

Excuse me, but I repeat my question again :
How  return  red colour for Overexposure  (Luma) in Zebras? For 5D mark ii and EOS-M also. Now colour is not enough contrast for me, especially for bright day. May be somebody send a zebra.c with red colour. I am going  to compile autoexec.bin.

That's the problem with 3rd party ACK-xn kit they do not have a chip to report such.

There is no solution other than use a battery or a grip with a pair of batteries.

Have the same problem myself.

Anyone know if the Canon version has the same problems?

Dear developers, thank you very much for your every day job. Your ML is really cool.
I have three Q:
1. How  to return  red color  to Luma in Zebras? For EOS-M also. Now color is not enough contrast for me, especially for bright day.
2. Does Sound Recorder (Audio menu) work Movie mode only?
3. Audio RemoteShot (Shoot menu) does not work on my 5D Mark III.
Regards

It works on 5D sn 09307xxxxx. Thank you very much!

I solved my problem with running ML on my 5DC (blue + red LED)
Problem was with OLD 1GB CF card, with new 8GB card started OK.
Thanks!

Me too! I used old 512MB CF to run ML. It was changed to 2GB CF. It was formatted in 5D. Than I used a procedure from first post. ML works now. My SN is 0930710567 DS126091. There is no any blue LED on my 5D.
Thank you very much!

What about downgrade to v.1.0.9 and install ML2.3? Does it work on new 5D (with s/n more than 09xxxxxxxx)?

Thank you very much!
You may delete this post.

Good Evening,

I have 5D MIII. Thank you very much for this SW. Waiting for 2.4 .
I  tried to change some settings, but after power off-on there is default settings.  Is it OK?