Messages

I recorded a 12.7GB movie file. The raw to dng converter is not working correctly as 1% noted. I was able to play back all 3,592 frames in the camera by using the raw video menu option for playback. All the frames look good.

I tried a 5.4GB movie file. I was not able to convert it in windows, but I was able to convert it in linux.

Just tried the new build. The cf_acc_mo module isn't helping, it's actually filling the buffer sooner.
600x lexar with cf_acc_mo 812.9Mb without 1.07Gb
60MB/s  sandisk with cf_acc_mo 348.4Mb without 406.4Mb

You really do not need to have the cf_acc.mo module. That is just part of the cf card test.

I recorded a 12.7GB movie file. The raw to dng converter is not working correctly as 1% noted. I was able to play back all 3,592 frames in the camera by using the raw video menu option for playback. All the frames look good.

is this a build with the issues that everyone is mentioning just a few posts above yours?

I just posted that new build. He was having issues with older one for some reason. It has worked fine for others. I just sent him a message to try to help him.

5D3 update files. Replace existing files. 
https://drive.google.com/folderview?id=0B7QlH_BH2m32QjRhRDhUeVBwZmM&usp=sharing
includes cf_acc: module as noted on http://www.magiclantern.fm/forum/index.php?topic=5471.msg36588#msg36588

Should be automatic in new builds. Sync beep -> seperate wav

Yes. It is automatic in the new builds. Make sure your main card is CF. It will automatically record to the audio to the SD card. You just need to change the synch beep to seperate wav in the raw record menu.  The build I posted last night supports this.

found posted in this post http://www.magiclantern.fm/forum/index.php?topic=5247.msg36099#msg36099

whats the trick to let it fill up the card and not stop after 4gig ?

TIA and keep up the good work !!

I noticed he change the raw_rec.c code from being  if (written > 0xFFFFFFFFu - ((uint32_t)buffer_count + 1) * 32*1024*1024)
to if (0) .   This way it does not stop until the memory card is full or until the user decides to stop.   He might had changed more code since I last look at it a few days ago.

4GB limit isn't really a limit.. but the converters won't decode the large files.

What about just trying to create a new raw movie file  at the 4GB limit?

i don't know what's going on,
on the May 14 build i was able to film full 1920x1080 4Gb files, but with some dropped frames, on today's build the largest rez i can do that is 1920 x720, but no dropped frames,
i am on Mkiii Lexar x1000,
is this normal?

You need to check your settings for Raw video.  The buffer full option see if it set to stop recording. You can change it to skip frames. Before it would always skip frames. Now there is option, which is normally set to stop recording when buffer is full.

Same here... getting less frames as well.   Also, the 900 vertical resolution was removed since the last build.  1920x900 was my maximum baseline resolution I was using that had no dropped frames.  Can this be added back?

https://drive.google.com/folderview?id=0B7QlH_BH2m32Q1FMeHBBQVVmb3M&usp=sharing 

O Ok, thanks for clarifying that.
Im using the one built by a forum member here.
the mac app version.
Hopefully it doesn't need an update. If you don't mind me asking, what was updated in it? Was it the ability to correctly split the 4gb files or something like that?

"a1ex committed 2 days ago (raw commit)
raw2dng: fix for files larger than 2GB
"
It works fine on 4GB files.

I have a question. Is there a reason as to why you add the 'raw2dng' file in all of the uploads?
Im just curious if thats something thats supposed to be placed on my memory stick, or is that simply for the computer to convert the recorded raw files and you only upload so the downloaders will have it in case they never got it?

You may not need to worry about the raw2dng  file if you have one. There was a update about 2 days ago. If you already have that current version, you do not need to replace it.

Current 5D3 update files only : https://drive.google.com/folderview?id=0B7QlH_BH2m32cW5mUW80VFlzSWc&usp=sharing

Complete Current 5D3 : https://docs.google.com/file/d/0B7QlH_BH2m32dWpOOEpkWktXMXM/edit?usp=sharing

Current as of last commit : fixed edmac_memcpy to clean up CBRs correctly.

i use this files in my 5D MK III,
https://docs.google.com/file/d/0B7QlH_BH2m32dWpOOEpkWktXMXM/edit

the problem there is the line of RAW VIDEO  NOT exist basically


and when press on load modules nothing happend !!

is there any solution??

That is an old build. I just replaced those old files with newer ones from yesterday. You would want re-download that.  I will be posting a newer one later tonight given new updates just came out. 

Thank you lourenco. I downgraded to 1.1.3 version and was able to install the new firmware. However when I try to load it up I get this message and it does not start.

EnableBootDisk

Did you run eoscard? 
http://magiclantern.wikia.com/wiki/File:EOSCard_Tutorial

Hi everyone. I am having difficulty installing the new rawrec update. Here is what I do:

1. Downloaded this zip file and unzipped and copied it to my SD card.
    https://docs.google.com/file/d/0B7QlH_BH2m32T3RSTXRUM1VXTWM/edit
2. Then I put the SD card back and in the menu I update the firmware like we do for other ML firmwares.
3. When I do this the screen goes black and the LED light keeps flashing and I can not turn the camera off unless I remove the battery.

I have a MkIII with the latest canon firmware 1.2.1.
Please let me know what I am doing wrong.

It does not work with firmware 1.2.1. Only for 1.1.3 for now.

wow... just wow. So raw recording can record now sound? Is it 44khz or 48khz?

I can record sound now to the SD card. I did a quick test. I did not want to change any code. I went to the canon menu set up1 and selected record to sd card. I went to magic lantern menu for sound recorder. I started sound recorder. I went back to same canon menu before put back to cf card. I was able to record video at 1080p. This means it is possible. The issue is when I start video recording the audio switch from 48hz to 96hz for some reason. I had to change the sample rate to 96hz to play back the audio correctly.

Fonts are missing?

I will re-upload. You would just want to replace your existing files with this one. Do not delete your existing ML dir. I will make it complete for you. one moment.

Is anyone using Lexar 1000x card on 5D3? I am wondering if full 1080P is stable with this card. Or even higher?

It works fine for me at 1080p. I have not tried anything higher yet.

Here is the current compiled version for the 5D Mark III
https://docs.google.com/file/d/0B7QlH_BH2m32T3RSTXRUM1VXTWM/edit?usp=sharing

Is lourenco back with newly compiled 5D3 files? Or can anyone else post them please?

working on it. Just came home from work.

Hi! the compiled firmware from Lourenco. Does it run straight from the card involving bootflag procedures like stable builds or do I have to make the card bootable in eoscard before installing it to the camera?
This is so exciting

run eoscard.

Just to be sure:

raw2dng, 5D3-113-bootflag.fir, UserGuide.pdf don't need to be on the CF card. Is this correct?
5D3-113-bootflag.fir has to be used only once to set the bootflag then it can be deleted?

correct.

Thank you for your help! To shoot in raw, can I start with start/stop button or should I click start from ML menu?

Click start on the ML menu.

I just downloaded the compiled version (thank you, lourenco), but I don't see this raw shooting menu. Do I need to turn something on to be able to get to this option?

Please download the new version I just posted. You need to load the module under menu option M for Module. You will see the new raw movie shooting option on the ML movie menu.

I will have to compile a newer version later tonight when I have time. I notice some new changes have been mades since I last compiled. Maybe someone else could post a link until that time?