Messages

Super awsome! 

@dfort
Tryed the dec 4 build with mlv + sound full HD 10,12 & 14 bit
12 bit suffered from screentearing. Even a little more severe than the previous one I tryed
10 bit upper one third part on every other fame corrupted
14 bit OK
All bitrates in mlv-lite worked as before.

Is there a new version for 5D3 for mlv 10-12bit testing.

I filmed 50p 10bit continious with half vertical res on the 5D3 with the previous build (raw rec/ mlv light)

Maybe pismo is the problem. I'll try mlvfs with dokany. Windows here.

Mlvs mounted with pismo file mount. Compressed with slimraw to hard drive. Processing in resolve 12.5.
Latest version of Slimraw.

Thanks. Gonna experiment with 12bit 3:1. Last I tryed I only got white frames in resolve tough.

Has anyone been successful in converting mlv dngs to 3:1 compressed dngs with Slimraw?

Raw_rec works without glitches 10bit/12bit?
Is raw_twk causing the 5x zoom to freeze?

@Danne
Yes rawrec 10-12bit works as far as I can see.
Yes raw_twk causes freeze.

5D3 113 Results:

Works
12bit & 10bit RAW Full HD
3xcrop with good preview works. Even with 10bit.
5XZoom without rawtwk loaded works
recorded 2.5k successfully but preview bugged out when the recording starts.

Things that dont:
12bit MLV screen tearing in the top part of the frame as MitchLally noticed.
10bit MLV gives colorful corruption on every other frame top third part
5xZoom with raw twk results in crash as Surin Dmitriy noted

Crashlog from yesterday when I tried to get 10-12bit working on 5d3 123:

ASSERT: hLvJob->hJpegMemSuite
at ./Epp/Vram/VramStage.c:891, task Epp
lv:1 mode:3


Magic Lantern version : Nightly.2016Nov30.5D3123
Mercurial changeset   : 083982718d31+fd61d21d1429+ (5D3-113_123_10bit_12bit)
Built on 2016-11-30 08:02:13 UTC by rosiefort@RosieFoComputer.
Free Memory  : 165K + 3736K

Not sure if this is helpful?
I'll try out 113.

Didn't get far with fw123 version. Crash when enableing raw rec and/or mlv rec module. 

I can share the crash log when I get home from work.

Is it only possible to test this on 5D3 fw113? No fw123 version? If there Isn't I'll guess I'll just downgrade but 123 would be sweet.

Same problem here for 5d3 123. Can't find settings for bit depth.

Thanks! gonna try DeafEyeJedi's Compiled file!

This sounds very exiting! Is it possible to try it on 5dmk3? Special module or ml version required?

@markodarko
If bad pixel fix slows down your process much you can get rid of the bad pixel with a secondary node in resolve instead. You make super small masks that blur out the stuck pixels. It's quite tiresome and fiddely to make masks for all the bad pixels but once you have done it you can save all the masks as a preset that you can reuse later since the bad/stuck pixels will be in the same places.

After trying anything and everything. I got an idea to try the x86 version of mlvfs instead and got it working right away. So it seems x64 version will not run on win 10 (at least not for me). Something goes wrong when it tries to mount the files to X:

I noticed that Pismo is much faster so I'll be sticking with that for a while. I mount my files from the card directly and then use slimraw to copy/compress them to harddrive. In that way I only get compressed footage on the harddrive. With Pismo and Slimraw this is just a little bit slower than copying the mlvs to the harddrive directly.

@Ottoga This is as far as I get. Everyting seems fine in browser but I cant access X:\. If I type sub-paths in --mlv_dir command I can't see them in browser.
Had the same problem trying it out on win 7...

Still can't get MLVFS to work. (Win10 64bit)
I installed the new version of mlvfs with x64 bit support and dokan 1RC2 (tryed RC1 as vell) Uninstalled before reinstalling with boot in between.
MLVFS version from this post http://www.magiclantern.fm/forum/index.php?topic=13152.msg163041#msg163041
Used the following string to mount: "mlvfs_x64.exe C:\MLV --mlv_dir=F:\DCIM\100EOS5D\"
The MLV-file I tryed to mount was about 4.5 gig in size
This time I can not even enter the mounted catalog and keep getting the following error message when I try to:
mlvfs_wrap_getattr(1746): caught exception 0xC000001D at address 0x5AF8A3F3

even tryed going offline and deactivating avast anti-virus program...
Also uninstalled Pismo mounting.

So now I'm at a loss what more to try.
Anyone got any suggestions?
Any help would be greatly appreciated.

@Ottoga Thanks for reply! I'll try it out as soon as possible. Excited of getting this to work instead of pismo. Fix pattern noise seems extremely useful.
Does anyone know if it is possible to process dng - sequences for fixed pattern noise if you haven't saved the mlv's?

I've installed dokan to try it out on win10 64bit but can't get it to function properly. I can mount the files and se the dng-files inside but if i try to open anything i just get: "load_chunks: fopen error: No such file or directory"

Anyone have any idea of what could be the problem?

v. 0.8.0 of dokan and MLVFSx86 from first post link

The guy that drives this site helped me recover a corrupted mlv file.
www.filerecovery.cz

He's called milank here on ml-forum.

Cool!  Need to check this out. Hot pixel fix plus pattern noise reduction avaliable for windows now?

Your personal issues that seeps trough between the lines of your posts are overwhelming. =D

@abooster: asbergers deluxe?