Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - domasa

Pages: 1 2 3 [4] 5
Today I had crash during record:

ASSERT: IsSuiteSignature( hSuite )
at ./PackMemory/PackMem.c:983, task MoviePlay
lv:0 mode:3

Magic Lantern version : crop_rec_4k.2017Apr29.5D3123
Mercurial changeset   : d55423f1e270 (crop_rec_4k) tip
Built on 2017-04-29 14:31:28 UTC by jenkins@nightly.
Free Memory  : 164K + 3811K

fullsize_buffers[1] == UNCACHEABLE(raw_info.buffer)
at mlv_lite.c:1379 (free_buffers), task raw_rec_task
lv:1 mode:3

Magic Lantern version : crop_rec_4k.2017Apr29.5D3123
Mercurial changeset   : d55423f1e270 (crop_rec_4k) tip
Built on 2017-04-29 14:31:28 UTC by jenkins@nightly.
Free Memory  : 144K + 3821K

I used H.264 proxy (H264->SD with ML; RAW 1920x1080 12-bit->CF)

Magic Yoom Large TL 3>1, Waveform small, Red Crossout, DIGIC peaking: Slightly sharper, Zoom with old button..

Feature Requests / Re: ND filter instead reflex mirror
« on: April 30, 2017, 11:31:51 PM »
The mirror is stuck on to an opaque piece of plastic, with only a hole in the middle, so could work for 3x crop maybe
:( This is bad news.

In my link replaced only focus screen. Not reflex mirror. Sorry for mystification.
Replace mirror probably require disassemble all camera :(

Feature Requests / ND filter instead reflex mirror
« on: April 30, 2017, 02:25:22 PM »
Camera EOS C300 has three internal ND filters:

ND 0.6 – 2-stop reduction
ND 1.2 – 4-stop reduction
ND 1.8 – 6-stop reduction

This is better than screw and unscrew ND Variable filter on lens after each change of luminance (filming in the dark church/sunny garden before church).

I use my 5D Mark III mainly on video. Why not use dark ND filter instead reflex mirror?  8)

Would be possible control reflex mirror in video mode? (flip-up/flip-down)

If yes - some company could be create ND filter (like "Mosaic Opto-Electronics, Inc." creates VAF filters)  :)

Reflex mirror replacement should be relatively easy:

General Development / Re: Recording RAW and H.264 at the same time
« on: April 30, 2017, 11:24:25 AM »
Is there the possibility of simultaneously deleting the h264 proxy and corresponding RAW file...?
It will be greate! Please do it.

Here's a current working copy of the newly morphed MlRawViewer 1.4.3:
Can you share newly version (supported 12-bit lossless compresion) for Windows, please?

Reverse Engineering / Re: ProcessTwoInTwoOutLosslessPath
« on: April 08, 2017, 04:04:11 PM »
...processing options such as bad pixel or vertical stripe fixes are not working yet
Would it be possible delete some rows and columns during processing (or color black for better compression)?

It will be great for record some resolution unsupported by ML.
E.g.: use supported resolution 5796x3870 25p for record UHD (3840x2160) 25p.

Feature Requests / Zip RAW video
« on: February 05, 2017, 01:43:37 AM »
Space is very limited when I record to RAW video.
Zip archivator runable after record (from menu) will be great :)

Raw Video Postprocessing / Re: The CinemaDNG Discussion (raw2cdng)
« on: February 05, 2017, 12:51:12 AM »
Exported *.dng have alway fixed size 2,97 MB (Full HD 10bpp converted to 12bpp).
When I use Adobe DNG Converter 9.8 to exported files, new size is only +-1,5 MB.
Is it possible use more effective Adobe DNG Converter in this tool?

Modules Development / Re: Astrophotography module (
« on: January 02, 2017, 08:24:57 PM »
It looks great. Thank you!

W * H * BD * FPS / 8 /1024 / 1024
(W &  H — frame width and height in pixels, BD — bitdepth, which now can be 10 or 12 instead of 14, FPS is frames per second, and converting to megabytes per second)

Is it right? Where is BD for second and third color? (R-G-B)

Feature Requests / "Scroll" HDMI output
« on: December 29, 2016, 12:42:07 AM »
Many HDMI monitors have 1:1 view (pixel per pixel) but most of them can display only center of view. Scroll display is not possible.

Is it possible add feature "Shift HDMI output" to "Arrow/SET shortcuts" for display optional part of view in center of HDMI output?

80D shifting the display buffer (from Twitter by a1ex ?):

10 bit normal mode and crop mode-> always good
Do you see some real danger of damage camera 650D after use current build (19.11.) for 1 hour continuously  10-bit RAW recording?

I have more than 1TB *.RAW videos with *.MRX files.
How can I trim all files? (I set input and output for most videos in MlRawViewer.)

Feature Requests / 4K video in 1:1 (
« on: May 16, 2016, 12:32:57 AM »
Is it possible change position of crop mode for every second frame (as HDR video)?

In post processing:
left and righ frames could be converted to one panorama.

Feature Requests / H.264 picture style HDR
« on: May 16, 2016, 12:26:43 AM »
Is it possible change Picture Style for every second frame (as HDR video)?

In post processing:
light and dark picture styles could be converted to file with 14bit depth.

Let's say you adjust this line skipping register to 1 (that is, read every two lines). Now you have a little problem: you only captured two Bayer colors
Is RAW file smaller when I record only two colors? It will be good for black and white recording..

Greate feature!
Please add "3x" next to focal distance. Now you can not recognize the current mode. Thx.

General Help Q&A / Re: h264.ini - how it really works?
« on: April 11, 2016, 09:56:11 PM »
" B:/ML/H264.ini not found "
Builld : NightyBuild 20 12 2015
Canon Firmware : 5d Mark III 123

A:/ML/H264.ini not found

Hardware and Accessories / Re: Delay with 5DM3-Raw + external monitor
« on: March 02, 2016, 01:13:48 AM »
No, I don't feel delay (when I don't concentrate on delay).

Hardware and Accessories / Re: Delay with 5DM3-Raw + external monitor
« on: February 29, 2016, 11:58:16 PM »
domasa, can you please tell me, if any of the ML-DIGIC peaking mode work on the Lilliput? Thank you in advance :)

ML-DIGIC peaking does not work with Lilliput :-(

This has another functions:
"Sligthly sharper" = OFF
"Edge image" = monochrome view
"Edge + chroma" = view with watery colors

These views are not sharpe. Unfortunately, these views are not related to picture style.

Hardware and Accessories / Re: Delay with 5DM3-Raw + external monitor
« on: February 27, 2016, 07:32:57 PM »
Sony CLM-V55 and his copy Viltrox DC-50 has delay 4 frames from 24fps.
I measured it by the videos on youtube:

My monitor Lilliput 5D-II has delay 3 frames from 25fps (Canon 5d2 with ML: RAW recording).

Feature Requests / Waveform in wide mode
« on: February 27, 2016, 04:54:12 PM »
Can you add wide waveform view like Cineroid EVF has?
( : style 1)

It will be much more usable for me.

( Note: FullScreen waveform is cropped on 5d mark II; Nightly.2015Nov07.5D2212 )

Feature Requests / AWB without shift
« on: February 27, 2016, 04:27:55 PM »
When I shoot a documentary video I sometimes mistakenly turn on "Adjusting white balance...".
This set wrong "White balance" and "WB Shift". When I switch to AWB by Canon menu (for fast fix) the "WB shift" is still wrong.

Is it possible:

1. turn on "Adjusting white balance..." by longer way for prevention
(e. g. by holding RATE button - similary as open ML menu by holding arrow button; or by double-click),

2. reset "WB shift" after set AWB?

Auto ISO is always 400 in manual photo mode :(

Magic Lantern did not fix it :(

Camera-specific Development / Re: Canon 600D / T3i
« on: January 10, 2016, 11:25:47 AM »
There are newer builds here:
No new features, but possibly some bug fixes.

New important change:
e5cc80d | Gr3g01
Fullres silent pics: max exposure for 500D/550D/600D is 15 seconds :)

Pages: 1 2 3 [4] 5