Messages

1

Share Your Videos / Re: EOS M 5k + Crane M2 Gimbal

« on: January 04, 2020, 01:00:37 AM »

Do you think it will work with ef-s 10-18 and the viltrox ef- efm (not speed booster)?

2

crop_rec and derived builds / Re: Danne's crop_rec_4k experiments for EOS M

« on: September 20, 2019, 04:47:16 AM »

@danne Ml fails to load after turning on camera without the card then inserting back the card with ml (haven't tested putting card without ml)
1. Remove card with ml
2. turn on camera without card
3. insert card back
4. turn on then no lcd, led blinking yellow green
5. tried the battery pull and switching with and without card first two times worked after more or less 5 tries. Third time worked after like 15 times of it (different random combinations of pull from battery pull and on without card, battery pull on then insert card, on with batt and card then pull battery). After booting it displayed the "skipping loading modules"

I don't know if this matters, maybe someone may accidentally turn the camera on without the card or something. Thanks!

3

Shoot Preparation / 2.39:1 Cropmark with Guide "Squares within the rectangle"

« on: September 17, 2019, 06:44:38 PM »

I dont know if this has already been added but here's mine made using PS and is based from this article by neil oseman: http://neiloseman.com/is-the-rule-of-thirds-right-for-2-391/

https://drive.google.com/open?id=1kSJhGXrDAoLdVHimF-7Ukg1_vKdMAb-6

Contains RLE and non RLE file, tested on EOS M and works fine

4

crop_rec and derived builds / Re: Danne's crop_rec_4k experiments for EOS M

« on: September 17, 2019, 06:14:49 PM »

Tested dual iso, 5k ana, 1080 mcm, and info button preview, all works as intended. Thanks!!

5

crop_rec and derived builds / Re: Danne's crop_rec_4k experiments for EOS M

« on: September 17, 2019, 05:36:10 PM »

Seems modules aren't loaded properly

regarding that, i dont see the module tab... was it removed by default?

Could you test completely uninstalling and then reinstall again.

I just did this, uninstall firmware via format, then copy and paste file then install, still not working, I will try to re download the files.

Disabling, then enabling bootflag again maybe fixes the issue.

sorry, i dont know how to do this 

What specs do you have on your sd card by the way?

Normal sandisk extreme pro card 95mb/s I have used it a lot of times with this camera and shot a lot of raw but I guess it's failing now??

6

crop_rec and derived builds / Re: Danne's crop_rec_4k experiments for EOS M

« on: September 17, 2019, 04:57:18 PM »

Here

7

crop_rec and derived builds / Re: Danne's crop_rec_4k experiments for EOS M

« on: September 17, 2019, 02:13:51 PM »

Danne, just downloaded and installed the new build you posted. Certainly fixed the issue I reported but the drop-down menus in the movie tab cannot be accessed while drop-downs from other menu like shoot, expo and the others works as intended. The only affected menus are those from movie - presets, ratio, bit depth, set 25fps, max iso, custom buttons (even with touch screen) but the other toogle options from movie works as it should like raw video, and sound recording ( both have drop down menus and works as well when using touch screen), shutter lock, etc. sorry if i complain a lot I just have some time to actually test the new build. Thanks!

what I tried; format, reboot, reinstall fw.

also, I noticed there's a red circle beside the "memory patches" from debug tab. In the description (bottom) says; cache is locked down (not exactly clean) in yellow color. Also shows 3 Rom beside the memory patch. I don't know if this will be helpful info but still decided to add here

8

crop_rec and derived builds / Re: Danne's crop_rec_4k experiments for EOS M

« on: September 16, 2019, 11:24:09 AM »

@danne I just upgraded to the sept 15 build and tried dual iso and set base to 100 and recovery to 400 but when I leave magic lanter menu, it shows 400/400 ISO in live view. I also tried setting iso to 100 in canon menu but it doesnt work. Thank you in advance