Messages

1

Camera-specific discussion / Re: Canon EOS M

« on: January 09, 2020, 06:32:08 PM »

Thanks for the help
will look into it soon

2

Camera-specific discussion / Re: Canon EOS M

« on: January 09, 2020, 12:10:23 AM »

Hey all really need a bit of help.

I have an eos m. I noticed that there is a few dead pixels
i use mlvfs and i used all the options to get rid and there is still one little white dot left in near the middle

any help would be appreciated

3

Camera-specific discussion / Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3

« on: December 16, 2019, 02:19:23 PM »

Thanks

4

Camera-specific discussion / Re: Canon 5D Mark III / 5D3 / Firmware 1.2.3

« on: December 15, 2019, 10:16:30 PM »

HELP

hey all
hope someone can help
i have a 5d mark 3 with 1.3.6 firmware.

Is there any way i can downgrade the firmware to 1.2.3

5

Camera-specific discussion / Re: Canon EOS M

« on: December 14, 2019, 09:04:51 PM »

Nice 1
I appreciate it

6

Camera-specific discussion / Re: Canon EOS M

« on: December 12, 2019, 08:54:51 PM »

Hey guys
Just wondering if I can go past 3200 iso
There is a few occasions I need to go past and it says max iso reached

Why is this and can I change it

7

Camera-specific discussion / Re: Canon EOS M

« on: November 30, 2019, 09:56:56 PM »

Hey guys need a little help

I am using my eos m and I cant figure out
How do I change the bit rate to 12bit lossless and 10bit lossless

I dont seem to be able to find it anymore

8

Camera-specific discussion / Re: Canon EOS M

« on: November 24, 2019, 12:48:56 PM »

Thanks true

Look guys thanks a mill
I sold my eos m about 6 months back
And I had a 70d then a 6d then a 5d 3 and last of all a 5d4

An I am back at the most trusted camera I ever owned
Eosm

I have a 24 to 70 f4 and I am loving it

Thanks again

9

Camera-specific discussion / Re: Canon EOS M

« on: November 24, 2019, 03:43:46 AM »

Hey guys any one know how to get rid of 3 or 4 red pixels in my raw video

I have a different eos m
And it has some bad pixels
I did the bad pixel fix in mlvfs
But is there an easier way

10

Camera-specific discussion / Re: Canon 70D

« on: October 28, 2019, 12:00:47 AM »

Thanks for your help I really appreciate it

11

Camera-specific discussion / Re: Canon 70D

« on: October 27, 2019, 11:29:44 PM »

hey all

just got a 70d

hoping if someone could help
is there a safe build that i can dowload to lossless video with sound

i looked an am not totaly sure

12

Raw Video Postprocessing / Re: MLVFS - a FUSE based, "on the fly" MLV to CDNG converter

« on: July 22, 2019, 11:56:24 PM »

@berechiah: Here is explained what to do: https://www.magiclantern.fm/forum/index.php?topic=16054.msg215358#msg215358

Thanks

13

Camera-specific discussion / Re: Canon EOS M

« on: July 21, 2019, 02:51:35 PM »

.

14

Camera-specific discussion / Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3

« on: July 02, 2019, 12:11:53 PM »

https://www.magiclantern.fm/forum/index.php?topic=23041.msg218165#msg218165

Nice 1

Thank for that

15

Camera-specific discussion / Re: Canon 5D Mark III / 5D3 / Firmware 1.1.3

« on: July 02, 2019, 12:23:05 AM »

Hi everybody where will I download the latest 5D Mark III firmware for magic lantern I know Dani updates the eos m

I am just wondering is there any new and improved firmware for the 5D Mark III

16

Camera-specific discussion / Re: Canon EOS M

« on: July 01, 2019, 08:42:20 PM »

WHAT A GREAT IDEA

The x3 toggle
I never knew I needed it until now
It's so handy
And the shutter botton is fine its handy to have there

Well done danne

17

Camera-specific discussion / Re: Canon EOS M

« on: July 01, 2019, 10:07:03 AM »

Is anybody using the SanDisk Extreme PRO - 256 GB - SDXC UHS-I - 95 MB/'s card? And is it any good for continuous recording?

Thata the exact one I have
I get continuous record no problem

Handles video very well

18

Camera-specific discussion / Re: Canon EOS M

« on: June 30, 2019, 11:33:45 PM »

Thanks. Numbers are good so problem lies elsewhere. But where...

Seems similar to the issue before
Hight the frame rate the lower the shutter speed

But I have not a clue

Dont worry about it
I can beg 40fps thanks to u
And a shutter of 70
This is perfect tbh

The eos m is so advanced thanks to u

19

Camera-specific discussion / Re: Canon EOS M

« on: June 30, 2019, 09:11:05 PM »

hope you can figure it out

You are a serious man if you have half an idea what this means
id love to know these things but they got way past me unfortunately

20

Camera-specific discussion / Re: Canon EOS M

« on: June 30, 2019, 09:09:20 PM »

Let's check you shutter blanking regs.
1 - disable all modules
2 - enable adtg_gui.mo restart camera
3 - find ADTG Registers and turn it on
4 - go into ADTG Registers and go to the bottom part until you find ADTG2[805F]N. Now stand on that register. Write down what it says at the bottom. Evf:33 and so on.
Do the same with register below ADTG2[8061]N.

You could probably use the Screenshot function if you are quick enough.

ADTG2[805F] N  0x588 Shutter ... x40/f
Evf:33be8:40481b20 v=1868(0x74c) nrzi_dec=1416(0x588).

ADTG2[8061] N 0x425 Shutter ... x56/f
Evf:33be8:40481b24 v=1591(0x637) nrzi_dec=1061(0x425).

here is a link to the photo I took

21

Camera-specific discussion / Re: Canon EOS M

« on: June 30, 2019, 05:53:08 PM »

Let's check you shutter blanking regs.
1 - disable all modules
2 - enable adtg_gui.mo restart camera
3 - find ADTG Registers and turn it on
4 - go into ADTG Registers and go to the bottom part until you find ADTG2[805F]N. Now stand on that register. Write down what it says at the bottom. Evf:33 and so on.
Do the same with register below ADTG2[8061]N.

You could probably use the Screenshot function if you are quick enough.

Unfortunately I am not home yet I will be in about 2 hours I will definitely check it once I'm home and let you know straight away

22

Camera-specific discussion / Re: Canon EOS M

« on: June 30, 2019, 04:44:53 PM »

Hey so I just happened to stumble upon something

I am in 42fps and if I change the shutter speed to 64 I get clear view on the screen  if I go over 64fps
and if I go to 40fps I get clear view to 70fps if I go over 70fps it goes all wonky

Dose this sound right?
I think it is one step closer to finding the issue

23

Camera-specific discussion / Re: Canon EOS M

« on: June 30, 2019, 04:05:59 PM »

Reproduced. Most likely you have AF method set to tracking. Go into photo mode and set canon menu to FlexizoneAF. Then reinstall magic lantern and start fresh. When I set AF method to tracking it starts to flicker but it still would flicker even after changing back to FlexizoneAF so a reinstall or cleaning the config file would eventually cure the issue.

But really 48fps woth stretch view is fine

And 36fps normal view is perfect too

It is most likely working and I'm making a mess of something. I'll continue to spend time on it but of I can I'll do all I can to get it going

Thanks man
Your d best

24

Camera-specific discussion / Re: Canon EOS M

« on: June 30, 2019, 04:01:26 PM »

Reproduced. Most likely you have AF method set to tracking. Go into photo mode and set canon menu to FlexizoneAF. Then reinstall magic lantern and start fresh. When I set AF method to tracking it starts to flicker but it still would flicker even after changing back to FlexizoneAF so a reinstall or cleaning the config file would eventually cure the issue.

Thanks Danne.
I did uninstall ml and I your right it was on focus tracking but it is still giving the weird preview

I dont mind its 36 fps perfect
It's not the end of the world if it dose not work for me. Maybe I'm doing something wrong. I didn't spend a load of time.Trying to figure it out. But I'm sure its something simple I'm missing

25

Camera-specific discussion / Re: Canon EOS M

« on: June 30, 2019, 12:03:05 PM »

I did that I tried pressing the canon menu and every different setting

Like every bit rate
Fine tune on and off
Global draw on and off
Change the fps in the canon menu
Every different way I can think I spent a long time trying all different setting to make it go away

But it's still there

It's ok tho it would be nice to have it but if it odnt work its fine