Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - tihon

Pages: [1] 2 3
1
Share Your Videos / Re: Canon Eos M RAW Video
« on: September 23, 2013, 03:41:25 PM »
Thanks! And what is the maximum resolution you can set to continuous 24fps recording?

2
Superb! Some scenes are too shaky on my view... Maybe it's for dramatic atmosphere... Who knows)) Anyway: awesome.

60 fps?

3
Share Your Videos / Re: 550d RAW in AYIA-NAPA
« on: September 12, 2013, 08:43:31 PM »
I like it! Nice color grading and great job on stabilizing... what did you use for the grading?

Thanks. My bad for using wrong vimeo export settings. I use Mercalli proDAD for stabilization, very good plugin!

I use only ACR for grading

4
Raw Video / Re: RAW video and super 16mm glass?
« on: September 11, 2013, 08:34:12 PM »
Even you got it mount it, you can't achive focus, you can only use it for macro work. The lens have to be VERY close to the sensor to get infinity focus.

IT`s true! I have 16mm lenses and 550d. Can`t achieve a focus... Only for super mega macro)))) It`s time to drill the sensor hole)))

5
Share Your Videos / 550d RAW in AYIA-NAPA
« on: September 03, 2013, 10:32:02 AM »



handheld, stabilized using prodad plugin. The footage was very shaky! 50mm+ aps-c+crop

Vimeo compressed my video. In original 20 mbps bitrate the file size was 300mb, and now it`s only 43mb...

I shoot this in 1480px width, in full hd mode 24fps (with no line skipping). I have only 3 seconds video clips.

I have only one lens: 50 mm f1.8 and the aperture was about f12-20

Watch  in hd, thanks.

6
Raw Video / Re: Turn your RAW footage into LOG
« on: August 08, 2013, 10:00:24 AM »
you can use resolve.
you can also use after effects by itself as well.

In resolve you  need to use "camera raw" to set profile in "film log". In AE you need to use ACR to "emulate" log (if you need)

7
Raw Video / Re: Turn your RAW footage into LOG
« on: August 07, 2013, 09:38:10 AM »
It's under project settings.

I checked my color space: it set as "NONE" :)

8
Share Your Videos / Re: RAW in sport video
« on: July 12, 2013, 09:34:30 PM »
Thanks! Master!  Nice job, i wish you have a 5d m3, you have a talent. 

9
Raw Video / Re: Green/Magenta tint in RAW's DNG
« on: July 11, 2013, 09:44:22 PM »
+1

And what about resolve? Is it ok in davinchi?

10
Raw Video / Re: Video in 3.5k raw
« on: July 08, 2013, 09:46:26 PM »
what about rolling shutter?))

11
Raw Video / Re: Turn your RAW footage into LOG
« on: July 08, 2013, 09:12:04 PM »
so the last acr you made was a kodak acr log?
so in essence, I should be able to use the kodak LUT that I posted a video to and it should look ok?
or was the latest acr log xmp that you posted just a way of making Hooks lut look like the lut from a kodak log and its really no good for kodak luts(meants for red files)?

Last "kodak log version" doesn't  emulate red log:( this preset is only for use with Hooks lut to make a picture like a redlog+kodak lut. All you need is correcting wb and exposure

12
Raw Video / Re: Turn your RAW footage into LOG
« on: July 08, 2013, 07:56:46 PM »
That ACR log file you posted when applied to my footage with hooks lut gives a good kodak look.
Problem is, why do I need different log starting points?
i think because to simulate Kodak we need Kodak  LUT for canon LOG, not for Arri or Red.  And of course we need to have this log, but we don`t:)
We don`t have a true  canon raw log, so don`t have LUTS,

As you can see, i made my first ACR log preset using blackmagick film profile, and it works with all LUT`s exactly the same as bm raw, and provide the same results. I tried to use KODAK lut with bm footafe (film log) - looks bad. The same as in AE with ACR log + Kodak lut

I think those Kodak LUTs is for RED log, so we need to emulate RED log in ACR  to get the same result with LUT

13
Raw Video / Re: Turn your RAW footage into LOG
« on: July 08, 2013, 05:09:10 PM »
if we use a red`s lut, we need a red`s "log".  My "Log" is based on blackmagick log, so Hooks LUT works good.

Cineon converter  + Kodak lut works awful for me:(

Trying to emulate Kodak with my modified log preset + hook`s lut:



I think it looks great.

My new ACR "kodak log" preset for using with Hook`s LUT:)  : http://yadi.sk/d/PWpnACLk6bazc ) (ACR 7,8)

All you have to do is: shot with ETTR, and correct WB (temp and tint) and exposure for each clip

14
Raw Video / Re: Turn your RAW footage into LOG
« on: July 08, 2013, 03:19:56 PM »
I've been testing out some AMAZING luts by red users and what not. The best log footage that I've been able to get, was right in after effects. Click effects -----> utilities ----> citron converter. Then change the setting from log to linear to linear to log.

Looks horrible. Now add a cinematic LUT like a Kodak 2393

"rawdng to bmfilm (log)"  from me for ACR 7,8
http://yadi.sk/d/2vbU1S8G6bBdI must work

--------
Looks horrible. Now add a cinematic LUT like a Kodak 2393
----------
yep, i try kodak 2393 in resolve for blackmagick footage with film log profile, looks bad. Looks the same as my ACR log + kodak lut in AE:)


Here is an example of my ACR log preset

15
Raw Video / Re: Turn your RAW footage into LOG
« on: July 08, 2013, 01:12:08 PM »
I noticed that my preset works incorrect in ACR upper 6.6. But in 6.6 works good

16
Raw Video / Re: Turn your RAW footage into LOG
« on: July 07, 2013, 04:42:01 PM »
Hi! Thanks.
No math behind it. But it`s not like a cinestyle;) All DR is there.
I have quite similar results after  grading blackmagick footage  with film log (in resolve)  and in AE with this ACR preset.

17
Raw Video / Re: Turn your RAW footage into LOG
« on: July 07, 2013, 01:19:17 PM »
tihon MLraw-to-blackmagick_film(log)  ACR  preset


Don`t forget to shoot  raw with ETTR! (not auto ettr, i mean ETTR method)
http://yadi.sk/d/gZzLvG3g6ZTTq - xml preset file for ACR 6.6, 6.7 

http://yadi.sk/d/2vbU1S8G6bBdI  - xml preset for ACR 7,8

On a Mac, it’s located in User:Library:Application Support: Adobe:CameraRaw:Settings. On a PC, look in C:\Documents and Settings\user\Application Data\Adobe\CameraRaw\Settings.


I use this preset for blackmagic and canon raw files. BM files with this ACR preset looks the same as in resolve with bm film profile. Don`t forget to set right wb and exposure in ACR after applying this preset. Works awesome for me.

After "raw-to-log" is done you can apply any lut: I think that  Captain Hook`s lut for blackmagick gonna be nice:
about LUT: (http://www.bmcuser.com/showthread.php?3390-My-BMDFilm-LUT)
Lut buddy version of Captain Hook`s LUT (for Adobe Ae and Pr) : http://yadi.sk/d/cvz-uaL06ZVSq )
Thank! hope it will help

18
Raw Video / Re: Turn your RAW footage into LOG
« on: July 07, 2013, 12:45:21 PM »
Hi! I use my own  raw to log ACR profile. Based on BM  FILM profile. Now i can  use lut`s  created for bm film profile in AE. Works greate for canon ML dng and blackmagic cinema dng files.

Or you can convert canon  raw dng to log in resolve, just use a bm film profile in "camera settings".

http://img823.imageshack.us/img823/4880/y7h0.jpg

19
Share Your Videos / Re: RAW 3x Crop Test
« on: July 04, 2013, 09:27:33 PM »
thanks! can you shoot continuous 1920x818px in  1:1 mode in? It`s x3 crop, like a super 16 mm! Wow

20
Raw Video / Re: Turn your RAW footage into LOG
« on: July 04, 2013, 12:14:18 PM »
The best way to make log   - is create own profile in ACR. Or work in davinchi with bm film profile

Applying "flat" LUT to dng  will not keep all the details.What the point to shot raw in this case? It`s the same as shoot with h.264  cinestyle profile IMHO

21
Raw Video / Re: Resolutions, 50fps and write speeds
« on: June 16, 2013, 09:48:26 PM »
thanks! I wish we can get 1600px on 60 fps

22
Raw Video / Re: Resolutions, 50fps and write speeds
« on: June 16, 2013, 04:26:44 PM »
Thanks! Now i see.

And what max resolution you can get  with 60fps?

23
Raw Video / Re: Resolutions, 50fps and write speeds
« on: June 16, 2013, 02:29:02 PM »
Update:

50fps:
1600 x 560: 81mb/s continuous, 7% idle
1700 x 606: 81mb/s about 15sec, no idle

25fps:
1920 x 1080: 97mb/s cont, 15% idle
1920 x 1152: 97mb/s cont, 7%idle
1920 x 1280: 97mb/s about 15sec, no idle

So is CPU the bottleneck at the moment?

Sorry, but what does idle mean?)

24
Share Your Videos / Re: 5D mark 3 RAW test + Davinci Resolve
« on: June 15, 2013, 08:11:06 PM »
Nice shots! what lens did you use?

25
correct pink shift in raw before export to proress

Pages: [1] 2 3