Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Dmytro_ua

Pages: [1] 2 3 ... 10
Post-processing Workflow / Re: fastcinemadng
« on: May 23, 2022, 09:52:52 PM »
Starting from the current release, Fast CinemaDNG Processor software is free for non-commercial use.
The latest version of Fast CinemaDNG Processor software could be downloaded from

This web page doesn't work in Ukraine. Is it russian hosting or smth?

Camera-specific Development / Re: Canon EOS R / RP
« on: November 27, 2021, 02:55:23 PM »
Is there anything else in development here?

No news here = no news in development.
How hard to understand this?  :o

Share Your Videos / Re: Canon 5DIII and Rokinon 35mm T1.5
« on: November 03, 2021, 12:35:31 PM »
unsqueezed : 4128x2230
Sharpness pulled up in Davinci to 45.00  let me know what do you think about th sharpness now.

Can't really comment on this. The contrast looks a little bit high but the actual sharpness isn't here.
Maybe your lens is soft.

General Development / Re: 5D3, 4K 8bit mp4 is impossible?
« on: October 27, 2021, 02:04:01 PM »
Raw is possible and Jpeg is impossible?
I cannnot understand.

Raw need more power(?) and encoding and processing time than jpeg, right?
But Jpeg is impossible?

Camera always gets RAW information from sensor and only after that it encodes RAW to jpeg or 8bit video inside the camera.
That's why it uses processing power to get image in RAW + extra power to process it to other formats (jpeg, 8bit video etc).
You cannot get jpeg or 8bit video without RAW

I got the MBA 16GB, 8Core GPU

Does 16GB is a must for video editing? Or 8Gb will do the job?
I was looking for the cheapest MBA M1

Have my new M1 for 48 hours now... FullHD on 48fps runs in realtime! (with standard grading) ... I've never seen such framerate numbers in our tool...

Wow! What model do you have?

Does MLV App work natively with new Silicon M1 or with Rosetta 2?

Bravo  :) :) :) :)
Great colors. I like dark picture/mood

My first bike-packing trip ever.

Very nice! It seems to be a lot of focal lenses used here. Did you carry different lenses on bike-packing trip? Or is it smth like 24-70?

Raw Video / Re: AI algorithms for debinning
« on: July 27, 2021, 04:53:45 PM »
If R5 2 or 3 has the EM1 3 level's IBIS and rolling shutter effects, I will buy it over EM1 4 or 5. Otherwise, EM1 4 or 5 is a better choice.

These are absolutely different animals.
Don't forget that R5 is FullFrame and Olympus is 4/3"
Bigger matrix will have more rolling shutter and less capable IBIS as it has to move a much bigger hardware. Though I've never used Olympus cameras and can say nothing about them.

Raw Video / Re: AI algorithms for debinning
« on: July 27, 2021, 09:17:25 AM »
Canon EOS R5 Overheating Tests: The True Story

It all depends on your shooting style and needs. A lot of ML users are video hobbyists. Overheating is not an issue for a lot of users.
R5 is also a great stills camera, FF, DP autofocus, IBIS, etc. Which is not any of the listed above dedicated video cameras. That's why it's not correct to compare the price.  ;)

If the overheating the only reason not to buy this cam - there are some 3rd-party modifications. It void your warranty, though

Raw Video / Re: AI algorithms for debinning
« on: July 26, 2021, 04:52:38 PM »
I really hope that ML can break into the new R5 series, that will be dream.

R5 is a great CAM even without ML, so if you can afford it - it's a great choice ;)

Hardware and Accessories / Re: Dslr controller as (dslr) monitor
« on: July 17, 2021, 03:31:24 PM »
- can you link to the DSLR controller app?


Sharpening is not applying to RAW footage.

Yes, it does.

Oh, to fast conclusion. After export all frames are corrupted, only sound is fine.

Does it export to "an easy path" like C:\ ?

Yes, it does. Strange thing though I've used this path before.

I've also found that it couldn't export regular DNGs to that path giving me an error of corrupted frames (all of them).

Anyway, smth's wrong with my path:

Probably ffmpeg is missing in your MLVApp installation folder.

ffmpeg seems to be there

The path does not contain any non Latin symbols.


I've got some strange behavior. When exporting converted clips after export is done, the destination folder is empty. Tried different export formats/settings.
I'll try to find the problem as I assume, I'm doing smth wrong. Never happened before. Win10 64.
I'll report here later

Share Your Videos / Re: 5.7K in day and night (5D3)
« on: March 08, 2021, 12:11:13 PM »
I already use 1.12

Yep! Now is correct  ;)

Darkframe is very important for low light footage. You can kill a lot static noise with it... and with very high speed.

Wow, thanks. Will learn more about it. Missed this in a huge amount of other great features.

Share Your Videos / Re: 5.7K in day and night (5D3)
« on: March 07, 2021, 04:07:37 PM »
Here a short cut of the title clip. I also added my grade receipt. The darkframe is included in the clip.

Great video!
When applying your receipt I get very dark image.
And I absolutely missed the part about darkframe on this forum. I'm not sure what it is and how to use it. Maybe that's why I've got such a different result.

There're a lot of bad reviews about poor image quality and buggy software.
Interesting, how it compares to DJI Ronin Raveneye Image Transmission System

Try 32-bit version.

Already did.
Does nothing at all.

And the stupid method: just copy of dokanfuse1.dll from 32 folder to 64 gives me this error (my hopes were not to high while doing this  :D :D):

My system is Win 10 64

Hell of a string

On a Windows version in 64 folder I get an error about dokanfuse1.dll. I see dokanfuse.dll file in a folder, but not dokanfuse1.dll

crop_rec and derived builds / Re: Danne's crop_rec_4k & ISO experiments
« on: January 05, 2021, 04:23:08 PM »
The mlv file is opening fine in MLV App, but as soon as I transcode in .dng, the files become unreadable.

I think it's better to upload small MLV file and ask in MLV App thread for a help with transcoding. You won't get any help without a corrupted file uploaded.

Pages: [1] 2 3 ... 10