Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - schedonnardus

Pages: [1]
Camera-specific discussion / Re: Canon 6D
« on: January 24, 2017, 09:54:05 PM »
You don't need to make your SD card bootable via your PC. I just went through this issue for a second SD card for my camera and all you need to do is extract the nightly (or whatever build of ML you want) to the SD card and run the cameras firmware upgrade. The ML install will make the SD card bootable for you.

good to know. Still the eoscard website has all the old firmware. since canon's website only has 1.1.7 on it now, ppl will need access to 1.1.6. I installed 1.1.6 from there and it worked fine.

Camera-specific discussion / Re: Canon 6D
« on: January 20, 2017, 11:05:26 PM »
so i finally joined the modern age and update my 6D from firmware 1.1.3 to 1.1.6 8)  Everything went smoothly, and I'm looking forward to using the most up to date ML!

Thanks to the devs for all you do!

Camera-specific discussion / Re: Canon 6D
« on: January 06, 2017, 04:57:06 AM »
the EOScard website (which you'll need for making your SD cards bootable) has firmware for many different Canon cameras way at the bottom of the page

very impressive shot! thanks for sharing.

Share Your Photos / Re: Old ladies
« on: March 01, 2016, 08:50:46 PM »
nice work! i like the 2nd one the best

Share Your Photos / Re: Motion detection water drop
« on: March 01, 2016, 08:47:13 PM »
pretty cool! I'd love to see a test shot done with a macro lens.

Archived porting threads / Re: Canon 6D
« on: March 08, 2015, 07:39:38 PM »
ah, ok.

Archived porting threads / Re: Canon 6D
« on: March 08, 2015, 07:22:32 PM »
The disappearing menu is a common bug, i't there to stay and we LOVE it! :D

so what causes this "bug?" I'm still running the March 23 2014 build (i only use ETTR, DualISO, Intervalometer, motion detect, and overlay, so i haven't bothered to upgrade) and the ML menu screen stays on forever.

Archived porting threads / Re: Canon 6D
« on: March 02, 2015, 01:00:21 AM »
yeah, the 1.1.4 update was made to prevent you from using 3rd party batteries

Archived porting threads / Re: Canon 6D
« on: September 11, 2014, 07:48:32 PM »
I haven't been on here in a few months, been skimming back over this thread. I'm currently running the March 23rd build, it does all that I need it to do (DualISO, Intervalometer, focus stacking, exposure sim, overlay, ETTR) has there been any major changes that would prompt an upgrade, or should I just stick with what works?

Also, I experience the same interlace "issue" with DualISO that is mentioned above. I had just assumed that was how it was supposed to look before you post-processed it cr2hdr.  The lines show up in Lightroom as well, so I thought nothing of it.

Share Your Photos / Re: Thread photos dual iso
« on: April 15, 2014, 10:05:16 PM »
here are a couple of new Dual-ISO shots from my recent trip to Oregon

Tree-Sun_Flare by texasaggie_02, on Flickr

Tunnel_Falls by texasaggie_02, on Flickr

Share Your Photos / Re: Thread photos dual iso
« on: April 08, 2014, 04:34:32 AM »
nice shot!  :D

Share Your Photos / Re: Thread photos dual iso
« on: April 07, 2014, 04:14:06 PM »
WOW!, thanks for sharing bkrzic

General Help Q&A / Re: All I want is basics for 6d
« on: April 04, 2014, 04:18:33 AM »
i imagine it will be awhile before there is any kind of "stable" build for the 6d.  I have been using the nightlies (haven't updated in a week though) and have not ran into any problems.

I have been using the ETTR, Dual-ISO, Intervalometer, Exposure Bracketing, and Image Ghosting.  Those features have all worked fine for me.  I cannot attest to all the other features.

Archived porting threads / Re: Magic Lantern for 6D | Dev kit released
« on: April 02, 2014, 04:54:24 AM »
for the record, I am using "Digipower " brand batteries, and they work fine, no errors.

Share Your Photos / Re: Thread photos dual iso
« on: March 31, 2014, 07:02:47 PM »
This is my first dual-iso image.  Driving home the other day, a really awesome thunderstorm was rolling in. I drove out into the field on the farm to get a wide, clean shot of the impending storm.  I used my 50 f1.8 on my Canon 6D and shot in dual iso 100/800.  It really helped me to get the bright clouds and the dark soil all in one shot.   The final image here is a pano stitched together in CS6.

Thanks for all the amazing work ML!

Archived porting threads / Re: Magic Lantern for 6D | Dev kit released
« on: March 28, 2014, 08:49:23 PM »
this awesome, thanks for all you guys do!

I dont find the DUAL ISO option.
Do I need to install addicional modules?

My version is: magiclantern-v2.3.NEXT.2013Nov02.6D113

Hey, I'm new to magic lantern, but i noticed that magiclantern-Nightly.2014Mar26.6D113 (which is the first version i've ever run, so I'm REALLY new  8) ) has dual iso in the module menu.  I hope that helps.

General Help Q&A / Re: Formatting card and making other ML cards
« on: March 26, 2014, 09:49:23 PM »
1) Formatting my card.

My "normal" way is to put it in the Canon 5D Mark II; press menu and then scroll through to format.

2) Thank you.

So for each card that I want ML on I copy across the files using my card reader and then go through the process again of installing ML. Correct?

if ML is already installed and running on your camera, then you only need the files on any new cards (and to make the cards bootable through the EOScard application

Pages: [1]