Messages

Thank you Danne! The problem is the suffix .cr2 to rename to .CR2!...

Thank you, Danne! I use Switch in a xfce Terminal. I take screenshots & copy the folders images & Switch in a dropbox. I tried dualiso2hdr & the others alone, it works with those in folder Bin .
https://www.dropbox.com/sh/wktvznb98nxuymw/AADKn1F7EcieDYmXXJ0aEpIKa?dl=0

I tried Switch for the 1st time without problem on a ubuntu studio 18.10. It installed Yad , as planned. With a serie of pictures, dualiso, from the same Eos5DmkII, it doesn't work at all. I look at the log file & there, i don't understand the problem... The Switch files are in my Home directory. I followed the instructions. Can you help me?
The log file:

ls: cannot access '*.MLV': No such file or directory
ls: cannot access '*.mlv': No such file or directory
[ERROR] Failed to open file ''
ls: cannot access '*.MLV': No such file or directory
ls: cannot access '*.mlv': No such file or directory
[ERROR] Failed to open file ''
    =========
    Main menu(B
    ---------

output: (B
darkframe storage:(B
afplayer: (B

    (m)  mlv_dump settings(B(MLV)(B
    (ms) mlv_dump_on_steroids settings(B(MLV)(B
    (p)  ProRes output(B(MLV,RAW,dng)(B
    (d)  cr2hdr dualiso processing(B(CR2)(B

    (C)  select new output folder(B(MLV,RAW,dng,mov)(B
    (R)  reset Switch to defaults(B
    (A)  darkframe average automation(B(B
    (F)  flatframe average automation(B(B
    (q)  exit Switch(B
    (r)  run Switch(B   

Please enter your selection number below:
ls: cannot access '/home/dim/Switch/config/tmp/FLATFRAME_A': No such file or directory
Would you rather select flatframe and darkflat manually?

Y/N?(BSelect your flatframe and a darkframe if needed
    =========
    Main menu(B
    ---------

output: (B
darkframe storage:(B
afplayer: (B

    (m)  mlv_dump settings(B(MLV)(B
    (ms) mlv_dump_on_steroids settings(B(MLV)(B
    (p)  ProRes output(B(MLV,RAW,dng)(B
    (d)  cr2hdr dualiso processing(B(CR2)(B

    (C)  select new output folder(B(MLV,RAW,dng,mov)(B
    (R)  reset Switch to defaults(B
    (A)  darkframe average automation(B(B
    (F)  flatframe average automation(B(B added!(B
    (q)  exit Switch(B
    (r)  run Switch(B   

Please enter your selection number below:
--amaze-edge --cs2x2 --same-levels
--amaze-edge --cs2x2 --same-levels
--amaze-edge --cs2x2 --same-levels
grep: /home/dim/Switch/config/A_cr2hdr_cmpr.txt: No such file or directory
grep: /home/dim/Switch/config/A_cr2hdr_cmpr.txt: No such file or directory
ls: cannot access '/home/dim/Switch/config/cpuboost': No such file or directory
    ===============
    cr2hdr settings(B
    ---------------
note! Reenter selection to erase!

output: (B

Interpolation methods(B
    (a)(B Amaze edge(default) added!(B         
    (m)(B Mean23(faster)   

Chroma smoothing(B
    (2)(B apply 2x2(default) added!(B            
    (3)(B apply 3x3
    (5)(B apply 5x5             
    (di)(B disable chroma smoothing

Flicker handling(B
    (s)(B same-levels(avoid flicker) added!(B 

Speed increase(B
    (B)(B CPU boost

    (E)  erase all settings(B
    (d)  Main menu(B
    (q)  exit Switch(B
    (r)  run Switch(B                                         

Please enter your selection number below:

MLV Dumper
-----------------

Mode of operation:
   - Input MLV file: '/home/dim/Pictures/2019/20190911/FLATFRAMES'
   - Rewrite MLV
   - Output only one frame with averaged pixel values
   - Output into 'ft__FLATFRAMES'
File /home/dim/Pictures/2019/20190911/FLATFRAMES opened
File /home/dim/Pictures/2019/20190911/FLATFRAM00 not existing.
Processing...

Reached end of chunk 1/1 after 0 blocks
Processed 0 video frames at -nan FPS (-nan s)
[ERROR] Number of averaged frames is zero. Cannot continue.
[ERROR] Failed to rewrite header in .MLV file
Done

rm: cannot remove 'ft*.wav': No such file or directory
ls: cannot access '*.MLV': No such file or directory
ls: cannot access '*.mlv': No such file or directory
ls: cannot access '*.MLV': No such file or directory
ls: cannot access '*.mlv': No such file or directory
cat: /home/dim/Switch/config/tmp/MLVFILESaa: No such file or directory
cat: /home/dim/Switch/config/tmp/MLVFILESadcat: /home/dim/Switch/config/tmp/MLVFILESab: No such file or directory
: No such file or directory
cat: /home/dim/Switch/config/tmp/MLVFILESac: No such file or directory
wc: _1_2019-09-21_0001_C0000/pix_fix.txt: No such file or directory
wc: _1_2019-09-21_0001_C0000/pix_fix.txt: No such file or directory
cat: /home/dim/Switch/config/FFmpeg_settingsPR: No such file or directory
cat: /home/dim/Switch/config/FFmpeg_settingsPR: No such file or directory
cat: /home/dim/Switch/config/FFmpeg_settings: No such file or directory
ls: cannot access '*.CR2': No such file or directory
ls: cannot access '*.DNG': No such file or directory
ls: cannot access '*.dng': No such file or directory

i have the same problem with 5Dc...  no nightbuild!

5d2 & ml night build (latest) eye-fi pro x2 16gb (dlock adapter), ml works fine but no wifi (& no dedicated menu) and when the card is not bootable (no ml) wifi works.... grrr

Somebody has a solution?!

yes the HDR settings are correct. The second bracket, from 2 to 9 brackets, isn't done.
I can tell to papywizard to trigger once  (i can set the width of the trigger pulse, in this case the shorter: 10 ms) and for each head pans.
more details here: http://www.papywizard.org/wiki/TipsAndTricks

Hello,

I use Magic Lantern 2.3 on an eos5D2 to take hdr pano with the Merlin head + papywizard. I check "trigger only once" in papywizard. It takes the serie of pictures but without the second one! 
Somebody can help me?

dimitri